접촉기,회로 차단기,태양광 인버터,전기 계량기,태양 전지
PR18S-BC10DNO is an M18 cylindrical plastic housing diffuse-reflective photoelectric sensor from LANBAO (Shanghai Lanbao Sensing) PR18S Series. It adopts a dedicated control IC for stable performance and integrates multiple circuit protections. Rated IP67 for dust and water resistance, it is a general-purpose object detection component widely used in industrial automation. It comes standard with a 2-meter PVC cable (접미사: -E2).
- Model Code Decoding
The full standard model is PR18S-BC10DNO-E2. The definition of each code is as follows:
PR18S: 제품 시리즈, featuring M18×1 thread, PBT plastic housing and diffuse-reflective detection principle
BC10: Detection specification
BC: 확산반사 (direct reflection) detection mode
10: Rated sensing distance of 10cm (결정된, 조정 불가능)
디: 전원 공급 장치 유형, DC 10~30VDC
N: 출력 유형, NPN
영형: Output logic, 평상시 열림 (아니요; output turns on when an object is detected)
-E2 (Default suffix): Cable outlet, standard 2m PVC cable; suffix -C stands for M12 4-pin connector type
- 주요 기술 사양
| 범주 | 사양 |
| 감지 모드 | Diffuse reflection (direct reflection) |
| 광원 | 880nm Infrared LED |
| Rated Sensing Distance | 10cm (기반으로 90% reflectivity white card, 조정 불가능) |
| 공급 전압 | 10 ~ 30 VDC |
| 출력 유형 | 3-wire NPN Normally Open (아니요) |
| 최대 부하 전류 | ≤300mA |
| 현재 소비 | ≤25mA |
| 응답 시간 | ＜8.2ms |
| 반복 정확도 | ≤5% Sr |
| Hysteresis Range | 3% ~ 20% Sr |
| 보호 기능 | 역극성 보호, 단락 보호, 과부하 보호, 서지 보호 |
| 상태 표시기 | 노란색 LED (lights up when object is detected) |
| 하우징 재질 | PBT Engineering Plastic |
| 전반적인 차원 | M18×1 thread × 53.5mm (body length) |
| 보호 등급 | IP67 (Compliant with IEC Standard) |
| 작동 온도 | -15℃ ~ +55℃ |
| 주변 습도 | 35% ~ 95%RH (비응축) |
| 인증 | CE, UL |
- Full Model List of DC Diffuse-Reflective Sensors in the Same Series
| 감지거리 | NPN 아니요 | NPN NC | PNP 아니요 | 피엔피앤씨 | NPN NO+NC | PNP NO+NC |
| 10cm (조정불가) | PR18S-BC10DNO | PR18S-BC10DNC | PR18S-BC10DPO | PR18S-BC10DPC | PR18S-BC10DNR | PR18S-BC10DPR |
| 40cm (조절할 수 있는) | PR18S-BC40DNO | PR18S-BC40DNC | PR18S-BC40DPO | PR18S-BC40DPC | PR18S-BC40DNR | PR18S-BC40DPR |
메모: All models are equipped with -E2 (2m 케이블) 기본적으로; replace the suffix with -C for connector version.
- Wiring Definition (3-wire Cable Version)
Brown wire: Power positive (+10~30VDC)
Blue wire: Power negative (0다섯 / 접지)
Black wire: Signal output (NPN 아니요; output conducts when object is detected, connect to the negative side of load)
- 일반적인 응용 분야
Workpiece presence detection and counting on automated production lines
Material detection for packaging and printing industries
Object recognition and sorting trigger on warehouse conveyor lines
Limit positioning and home position detection for equipment stations
Missing part and falling part detection for small components
- Troubleshooting Matrix for Common Faults
| 결함 현상 | 근본 원인 | Step-by-Step Solutions |
| Indicator off and no output after power-on | 1. 역방향 전원 극성 | 1. Check brown and blue wires and rewire correctly |
| 2. Supply voltage out of 10~30VDC range | 2. Measure supply voltage with multimeter to ensure it is within rated range | |
| 3. Internal cable breakage | 3. Replace cable or conduct cross test with spare sensor | |
| No signal output even when object is detected | 1. Object beyond effective sensing distance | 1. Reduce the distance between sensor and object with proper margin |
| 2. Low reflectivity of measured object (pure black / light-absorbing material) | 2. Use high-reflective surface or select 40cm long-distance model | |
| 3. Wrong wiring of output circuit | 3. Verify complete connection of black output wire and load circuit | |
| False triggering & continuous output with no object | 1. Highly reflective objects in background | 1. Adjust mounting angle to avoid reflective background |
| 2. Strong ambient light directly irradiating the receiver lens | 2. Install light shield to block strong direct light | |
| 3. 심각한 전자기 간섭 | 3. Route sensor cables away from power cables and ensure proper grounding | |
| Fluctuating and unstable output signal | 1. Object stays at the detection boundary | 1. Fine-tune mounting distance to stay away from critical zone |
| 2. Dust or dirt covering the lens | 2. Clean the lens with a soft dry cloth |
- 대체 모델
Upgraded model of the same brand: PR18-BC10DNO (Nickel-copper alloy metal housing with higher mechanical strength, 동일한 전기 매개변수)
Cross-brand equivalent alternatives: OMRON E3Z-D61, Schneider XUB5BNANL2
PR18S-BC10DNO is a standard M18 plastic housing diffuse-reflective photoelectric sensor manufactured by LANBAO. See physical specifications below:
- Detailed Mounting Dimensions
This sensor adopts threaded cylindrical mounting. Dimensions and mounting regulations are specified as follows:
| 목 | 사양 |
| Main Thread | M18 × 1mm (Metric fine thread) |
| Effective Thread Length | 30mm |
| Sensor Body Length (Excluding cable/connector) | 대략. 53.5mm (cable version) |
| Sensing Face Diameter | Φ18mm |
| 표준 액세서리 | 2 pcs M18 lock nuts, 1 pc anti-loose washer |
| Recommended Mounting Hole | Φ18.5mm through hole |
| Minimum Spacing for Side-by-Side Installation | ≥40mm (to prevent optical crosstalk) |
Mounting Instructions
- Fix the sensor on cabinet panels, brackets and other mounting positions via two lock nuts; the extension length is adjustable.
- Align the sensing face towards the moving direction of measured objects. The tilt angle is recommended ≤15°, otherwise the effective sensing distance will be reduced.
- This is a non-flush mount sensor. Do not embed the sensing face into metal mounting surface; keep the sensing face fully exposed.
- Wiring Definition & Connection Instructions
9.1 Standard Cable Version (Suffix -E2, 2m PVC Cable, 3-철사)
| 와이어 색상 | 기능 | 설명 |
| 갈색 | Power Positive (V+) | Connect to 10~30VDC positive terminal |
| 파란색 | Power Negative (접지) | Connect to power 0V / negative terminal |
| 검은색 | 신호 출력 (밖으로) | NPN 상시 열림 (아니요) 산출 |
9.2 Wiring Principle of NPN NO Output
This model is NPN sinking output:
When no object is detected: Output terminal is floating, internal transistor cuts off with no signal output.
When object is detected: Internal transistor turns on, black output wire connects to blue power negative terminal and outputs low level (0다섯).
Typical Wiring (Connect to PLC Sinking Input)
Brown wire → 24V+ of switching power supply
Blue wire → 0V of switching power supply & PLC common terminal (COM)
Black wire → PLC digital input terminal
Wiring for Relay / Indicator Load
One end of load connects to 24V+, the other end connects to sensor black output wire.
Sensor blue wire connects to 24V-.
Single-channel load current shall not exceed 300mA. 유도 부하용, connect a freewheeling diode in reverse parallel.
9.3 M12 Connector Version (Suffix -C, 4-pin Male Connector)
핀 할당 (View from sensing face, numbered clockwise):
- 핀 1: 갈색 (힘 +)
- 핀 3: 파란색 (힘 -)
- 핀 4: 검은색 (신호 출력)
- 핀 2: 여분의 (미사용)
- 설치 & 배선상의 주의사항
- Polarity Protection: Do not reverse power polarity. The built-in reverse polarity protection prevents burnout, but the sensor will not work normally under reversed connection.
- Load Limit: Maximum output load current is 300mA. Do not drive high-power loads directly; use intermediate relays for transition.
- 환경 요구 사항: Avoid direct sunlight or strong LED light on the sensing window, and keep away from mirror or polished metal reflective surfaces in the background.
- EMC Requirements: Separate sensor cables from power cables (인버터, servo cables) with a distance of ≥20cm. Do not lay them in the same conduit.
