피닉스컨택트 2904617 DIN 레일 전원 공급 장치

Full Order Code: QUINT4-PS/1AC/24DC/20/

✅ Key Technical Specifications

입력: Single-phase 100–240 VAC / 110–250 VDC

산출: 24 VDC, 20 에이, 480 여

설치: DIN 레일 장착

시리즈: QUINT4 (4th Generation QUINT POWER)

능률: 최대 94.2%

치수: 125 × 70 × 130 mm

보호 등급: IP20

특징: Dynamic Boost, remote signal contact, redundancy-ready, 넓은 온도 범위 (-40 ℃ ~ +75 ℃)

종료: Push-in connection terminals

😀 일반적인 응용 분야

24 VDC 전원 공급 장치 ~을 위한 PLC에스, servo drives and sensors inside control cabinets. Widely used in automated production lines, railway transit, 풍력, 수처리, construction machinery and other applications requiring high power supply reliability.

🧩 Cross-References & Same-Series Replacements

2904616: QUINT4-PS/1AC/24DC/10/+ (10 A version)

2904600: QUINT4-PS/1AC/24DC/5 (5 A version)

Legacy model replacement: 2320898 (older QUINT PS/1AC/24DC/20/CO)

⚠️ Selection Notes

접미사 /+ stands for model with DC OK dry contact (no communication interface CO). For coated anti-corrosion versions, please refer to separate part numbers. For redundant operation, pair with QUINT redundancy modules.

Full Range of 피닉스컨택트 Industrial Products (Matching QUINT4 Power Supply for Control Cabinets & 생산 라인)

1. DIN Rail Power Supplies (Same QUINT4 product line as 2904617)
2. QUINT4 시리즈 (고급형, redundancy-capable with monitoring, industrial mainstream)

2904616: QUINT4-PS/1AC/24DC/10/+ | 24 다섯, 10 에이

2904600: QUINT4-PS/1AC/24DC/5 | 24 다섯, 5 에이

QUINT4-UPS: DC uninterruptible power supply; keeps PLC/IPC running during mains failure, supports communication & soft shutdown

QUINT-ORING: 이중화 모듈; parallel two power supplies to eliminate single-point failure

2. UNO POWER (경제적, 비용 효율적)

UNO-PS/1AC/24DC/100W (24 다섯, 4.2 에이): 컴팩트한 사이즈, 저렴한 비용. Ideal for standalone machines and small control cabinets

3. TRIO POWER (중거리, 균형 잡힌 성능 & 비용)

TRIO-PS/1AC/24DC/5: Cheaper than QUINT, with DC OK signal. Mass deployed on production lines

2. CLIPLINE Terminal Blocks (Phoenix Contact flagship product)

ST Push-in series (도구가 필요 없는 배선, new project standard)

ST2.5, ST4, ST6: No screwdriver required; drastically speeds up cabinet wiring

UT screw-type terminals (Classic design)

UT2.5, UT4: Preferred for legacy projects, high-current circuits, 석유화학 & explosion-proof environments

PT twin terminals

PT2.5-TWIN: One input, two outputs for easy branch wiring

Fuse terminals: UT 4-HESI

DIN rail fuse holder with cartridge fuses for circuit protection

부속품: FBS jumpers, ATP partition plates, ZB marking strips

3. PLC Interface Relays & Isolation Modules (신호 분리 & 연락처 확장)

PLC-RSC-24DC/21 (2966171)

6.2 mm ultra-slim relay, 24 VDC 코일, 1아니요+1NC. Bestseller for high-density cabinet wiring

PLC-RPT-24DC/21-21 (2900330)

Dual-contact version with 2NO+2NC

REL-MR miniature power relays

Higher load capacity for driving solenoid valves and contactor coils

PSRmini safety relays

6 mm slim safety modules for E-stop and safety gate monitoring; meets PLd / SIL2 requirements

QUINT4 Full Model List

Single-phase 1AC Input Power Supplies (220 VAC Input)

24 VDC Output (주요 모델)

12 VDC Single-phase Power Supplies

5 VDC Single-phase Power Supplies

Push-in PT Versions (Tool-free Connection)

Three-phase 3AC Input Power Supplies (380 V Input for High-power Cabinets)

QUINT4 Matching Accessories (중복성, UPS, Buffer Modules)

1) DC UPS Uninterruptible Power Supplies (Hold PLC Power During Blackouts)

2) ORING Redundancy Modules (Dual Power Supply Parallel Operation)

3) Capacitor Buffer Modules (Short-term Power Hold, No Battery Required)

Suffix Code Definition (For Model Selection)

1. /SC: Screw connection terminals
2. /PT: Push-in tool-free terminals (새로운 프로젝트에 선호)
3. /+: Equipped with DC OK dry contact (your 2904617 has this suffix)
4. /콜로라도: With communication interface (NFC + bus monitoring)
5. 1교류: 단상 220 V 입력; 3교류: 삼상 380 V 입력

Shortened Purchasing List (Common Stock Items)

1. 저전력: 2904600 (5 에이), 2904616 (10 에이)
2. 주요 모델: 2904617 (20 에이, 선택한 모델)
3. 높은 전력: 2904603 (40 에이), 삼상 2904622 (20 에이)
4. Redundancy accessories: 2907752 (ORING), 2320386 (CAP buffer), 2907066 (UPS)