Schneider Acti9 C120N 125A Miniature Circuit Breaker

The C120N belongs to the Acti9 series high-current 소형 회로 차단기 (MCB). It is an upgraded high-current variant of the standard C65N, with a maximum rated current of 125A and isolation function. Widely used for power distribution in industrial and building terminals, as well as outgoing circuits in power cabinets.

1. 모델 정의

C120: 제품 시리즈, high-current MCB (63~125A)

N: 차단 용량 등급, Icn=10kA @ 400V AC

125에이: Rated working current In=125A (reference temperature: 30℃)

Full model requires additional [극 번호 + 트리핑 곡선]

C-곡선: Instantaneous tripping at 5~10In, for general power distribution, lighting and resistive loads (부품 번호. A9N18359 / A9N18363 / A9N18369)

D-곡선: Instantaneous tripping at 10~14In, for loads with inrush current such as motors and transformers (부품 번호. A9N18389)

2. 핵심 전기 사양

3. 배선사양

Solid copper cable: 맥스. 50mm²

Flexible copper cable: 맥스. 35mm²

Optional aluminum terminal: For 16~50mm² aluminum cables

4. 응용 시나리오
5. High-current outgoing circuits in factory buildings, computer rooms and building distribution cabinets
6. Main power incoming, fan and water pump circuits (D-curve recommended)
7. Alternative to small-frame moulded case circuit breakers to save cabinet space

옵션 액세서리: Vigi C120 residual current module, 보조 접점, fault alarm contact, 션트 릴리스

5. 선택 지침 & 대체 제품

선택 참고 사항

1. Derating is required when ambient temperature exceeds 30℃;
2. D-curve is preferred for motor loads; C-curve for general distribution;
3. C120N with 10kA breaking capacity; select C120H (15그만큼) / C120L (25그만큼) for circuits with higher short-circuit current.

국내 대안

친트: NM1-125 compact MCCB / NB1-125 MCB

맛있는: CDB2 125 series miniature circuit breaker

6. 일반적인 문제 해결
7. 마감 후 즉시 여행: Short circuit on downstream side, check cable insulation and load earth fault;
8. Trips after period of loaded operation: 초과 적재, actual load exceeds 125A, or high ambient temperature causes derating;
9. 닫을 수 없습니다, handle stuck: Damaged internal mechanism, or Vigi residual current module triggered;
10. Green indicator does not appear: Main contacts are not fully disconnected. Maintenance on downstream circuits is prohibited.
11. HS Code Reference

85362000 Low-voltage circuit breaker (for customs declaration reference only, subject to customs verification)

슈나이더 Acti9 C120N 125A Product Manual (Compiled from Original Datasheet)

시리즈: Acti9 C120N High-current Miniature Circuit Breaker (MCB)

정격전류: 125에이 (reference at 30℃)

차단 용량: Icn=10kA @400V AC

Reference part numbers:

2P C-curve: A9N18363

3P C-curve: A9N18369

4P C-curve: A9N18376

3P D-curve: A9N18389

The C120N is part of Schneider Acti9 high-current MCB family covering 63~125A. It features isolation function. The green contact indicator provides direct visual confirmation that main contacts are open, meeting maintenance safety requirements. It provides thermal-magnetic protection against overload and short-circuit for high-current power distribution in industrial and building distribution cabinets. Compatible with add-on accessories including Vigi C120 residual current module, 보조 접점, alarm contacts and shunt releases.

표준: GB10963.1, IEC/EN60898-1, IEC/EN60947-2; CCC, CE 인증

2. 전기 사양

3. 기계 & 배선사양
4. 설치: 35mm 표준 DIN 레일, 스냅인 유형, mountable in any orientation
5. 보호 등급: IP20 (front terminals)
6. 배선 용량

Solid copper cable: Max.50mm²

Flexible copper cable (with cable lug): Max.35mm²

Optional aluminum terminals: For 16~50mm² aluminum cables

4. 조임 토크: 3.5 N·m
5. 전체 치수 (18극 당 mm)

2피: 36mm 폭; 3피: 54mm 폭; 4피:72mm 폭

6. Operating environment

주변 온도: -25℃ ~ +70℃; derating required above 30℃

보관온도: -40℃ ~ +85℃

고도: No derating ≤2000m; 2000m 이상에서는 용량 감소 필요

상대습도: 5~95%, 비응축

4. 트리핑 특성
5. Thermal overload trip (역시간)

1.13~ 안에: No tripping within 1h (차가운 상태)

1.45~ 안에: Tripping within 1h

2. 자기 순간 여행

C-곡선:5~10인치, 전력 분배, 조명, 저항 부하

D-곡선:10~14In, 모터, 변압기, capacitor loads with inrush current

5. 옵션 액세서리
6. Vigi C120: Add-on residual current protection module, forms RCD+MCB combination
7. OF Auxiliary contact: Circuit ON/OFF status signal
8. SD Fault alarm contact: Tripping signal for short-circuit / 초과 적재
9. MX Shunt release: Remote electrical trip
10. MN Undervoltage release: Loss-of-voltage protection
11. Busbar: Comb-type busbar for multi-pole parallel incoming connection
12. 설치 & 작동 참고 사항
13. 정격감소: Derate rated current when ambient temperature >30℃. Derating also required for multiple devices installed side by side inside enclosed cabinets.
14. Isolation verification: When handle is set to OFF position, the green indicator visible confirms main contacts are fully open before downstream maintenance. Handle position alone cannot be used as isolation confirmation.
15. 배선: Top-in or bottom-in wiring is acceptable. Cable lugs are recommended. Tightening torque 3.5N·m to prevent overheating.
16. Model differentiation

C120N:10그만큼; C120H:15그만큼; C120L:25그만큼. Select H/L version for circuits with high short-circuit current.

7. 문제 해결
8. 마감 후 즉시 여행: Short circuit or earth fault on downstream side. Test breaker separately after disconnecting load to verify breaker integrity.
9. Trips after loaded operation: Actual load exceeds rated current, or high ambient temperature causes derating.
10. 닫을 수 없습니다, handle stuck: Damaged mechanism or locked residual current module.
11. Overheating when closed: Insufficient terminal torque, undersized cable, oxidized terminals.
12. Model Selection Table (C120N 125A)

Schneider Acti9 C120N 125A Overall & 장착 치수 (Original Datasheet)

참조: Height H=81mm, Depth D=73mm, height and depth are consistent for all pole types; width varies with pole count

Mounting rail: 35mm standard symmetrical DIN rail, snap-in installation

Common model: 3P C120N 125A (A9N18369): 81(여) × 81(시간) ×73(디) mm

Related Mounting Dimensions

1. 케이블 스트리핑 길이: 15 mm
2. 단자 조임 토크: 3.5 N·m
3. Max terminal wiring: Solid wire 50mm² / Flexible wire 35mm²
4. Cabinet clearance: ≥20mm wiring space reserved at top and bottom terminals; keep heat dissipation gap for side-by-side installation at high temperature (derating)

보충 노트

Depth 73mm: Total depth from DIN rail backplate to front handle of breaker body; cabinet door cutout needs clearance allowance

Height 81mm: Overall vertical height of device body, excluding cable bending allowance

If Vigi C120 residual current module is fitted, overall depth increases, refer to separate accessory datasheet for dimension