슈나이더 BLRCH200A240B40 역률 보정 커패시터

시리즈: VarPlus Can HDuty (헤비 듀티, PowerLogic PFC low-voltage power factor correction capacitor)

BLRCH = Heavy Duty version, designed for applications with high harmonic distortion and severe operating conditions; BLRCS is the EasyCan standard version with lower harmonic withstand capability.

모델 디코딩

BLRCH: VarPlus Can HDuty three-phase PFC capacitor

200: 20kvar @ 400V, 50헤르츠

A240: 24kvar @ 400V, 60헤르츠

B40: Rated voltage 400V

핵심 전기 매개변수

정격전압: 400다섯 (380V와 호환 가능 / 415V 시스템), dual-rated for 50/60Hz

380V 50Hz: 18.1kvar｜380V 60Hz: 21.7왼쪽

400V 50Hz: 20kvar｜400V 60Hz: 24왼쪽

415V 50Hz: 21.5kvar｜415V 60Hz: 25.8왼쪽

Continuous overcurrent capability: 1.8×에서 (heavy-duty design for harmonic resistance)

Permissible continuous overvoltage: 1.1그리고 (최대 8 hours within 24h)

Inrush current at switching: 250×에서

Maximum annual switching operations: 7000 타임스

Design life: 130000시간

Capacitance tolerance: -5% ~ +10%

Dielectric: Metallized polypropylene film with zinc-aluminium alloy, wave-cut edge technology

표준: IEC 60831-1 / IEC 60831-2

Terminal design: ClampTite locking terminals, vertical or horizontal mounting available

애플리케이션

Industrial sites with abundant non-linear loads (VFD, 정류기, UPS) and high harmonic content. Compared with standard BLRCS, it has greater harmonic margin and lower risk of bulging and premature failure.

대안 & 시리즈 내 상호 참조

Standard version with same rating: BLRCS200A240B40 (EasyCan, for low harmonic scenarios, 저렴한 비용)

Same capacity, higher voltage: BLRCH200A240B44 (440다섯)

선택 & 일치하는 메모

1. Heavy-duty capacitors are still recommended to use series detuned reactors for harmonic mitigation;
2. Switching device: 슈나이더 VarLogic dedicated capacitor contactor is preferred for inrush suppression;

Engineering reference: For 50Hz systems in China, 28.9A is taken as base rated current;

Max allowable continuous current of capacitor: 1.8×In → approx. 51.9A at 50Hz

일치하는 구성 요소 (접촉기, 회로 차단기, 케이블) to be sized at 1.5~1.8×In:

접촉기: Schneider LC1DK dedicated capacitor contactor (inrush-limiting type), ≥40A class recommended

회로 차단기: D-곡선, 32A or 40A

케이블: Copper conductor ≥10mm² for short cabinet wiring; 16mm² for long runs or high ambient temperature

Important reminder: After series connection with reactor, voltage across capacitor rises and actual operating current increases. Do not use the base 28.9A directly for sizing; correction according to reactor percentage is mandatory.

1. Reactor Sizing Logic (50헤르츠, 400V 시스템)

Reactor percentage selection rule (Schneider official guideline)

Schneider OEM reactor reference (matched to VarPlus Can)

Schneider detuned reactor legacy series: LRF

LRF0714: 7%, 1.4왼쪽, 480다섯, matched to this 20kvar capacitor

LRF1428: 14%, 2.8왼쪽, 525다섯

국내 대안: CKSG dry-type series reactor (CKSG-1.4/0.48-7%)

III. Critical Risk Notes for this model

1. BLRCH heavy-duty does NOT mean reactor-free. Capacitors will bulge and fail early under heavy harmonics without reactor; it only has higher tolerance margin than BLRCS.
2. Uniform reactor percentage for all branches within one PFC cabinet. 혼입 7% 그리고 14% detuned branches in same cubicle is not allowed, risk of internal resonance and harmonic amplification.
3. Switching cycle limit for detuned branches: 맥스 7000 operations per year (capac inherent limit).
4. CT for power factor controller: Install CT on grid side before reactor, not after capacitor branch.
5. Sizing Combination Summary Table (50헤르츠, 400다섯)

Schneider OEM Matched Reactor (LVR series, PowerLogic detuned reactor for BLRCH200A240B40, 20kvar@400V 50Hz)

Schneider current preferred series: LVR (legacy LRF phased out; 5.7% reactors fully discontinued, not recommended)

모델 목록

Model decoding:

LVR = Detuned Reactor

07 / 14 = 7% /14% reactor percentage

200 = Matched for 20kvar capacitor branch

A = 50Hz; B=60Hz

40 = 400V system; T = Standard version

General Specification of LVR Reactor

절연 등급: 클래스 H

정격절연전압 Ui: 1100다섯, power frequency withstand 4kV/1min

Inductance tolerance: ±5%

지속적인 과부하: 1.12~1.2×fundamental current (harmonic-hardened design)

건설: Dry-type 3-phase stacked core, vertical winding, IP00, indoor cabinet mounting

기준: IEC 60289, matched with VarPlus Can capacitor (BLRCH/BLRCS)

60Hz Matching (BLRCH200A240B40 = 24kvar @60Hz)

LVR07240B40T: 7%, matched for 24kvar @60Hz

LVR14240B40T: 14%, matched for 24kvar @60Hz

국내 대안 (CKSG dry series reactor, 프로젝트에 널리 사용됨)

Sizing Hard Rules

1. 5.7% (210헤르츠) reactors are fully discontinued by Schneider, no new specification; 유산 5.7% projects migrate to 7%.
2. Uniform reactor percentage inside one PFC panel. 혼입 7% 그리고 14% branches causes resonance hazard.
3. 14% detuned branches strongly recommend 440V capacitor upgrade; 400V capacitor suffers accelerated ageing under sustained overvoltage.
4. Reactor rated current to be sized on harmonic-amplified operating current, not only fundamental 28.9A.

Schneider Low-Voltage PFC Capacitor Full List (VarPlus Can Main Series)

Two core lines: BLRCS (EasyCan Standard Duty)、BLRCH (VarPlus Can Heavy Duty). Three-phase aluminium can, built-in discharge resistor, pressure disconnector, dual 50/60Hz rating, mainstream for projects in China. Legacy Varplus2, VarPlus Box mostly obsolete.

Unified Model Coding Rule

`BLRCH200A240B40`

1. BLRCH: HDuty Heavy Duty (high harmonic withstand, 1.8In continuous)
2. BLRCS: EasyCan Standard Duty (낮은 고조파, 1.3In continuous)
3. First numeric block: Rating @50Hz (왼쪽)
4. A = 50Hz flag; trailing numeric block: Rating @60Hz (왼쪽)
5. Bxx: 정격전압

B40: 400다섯

B44: 440다섯

B48: 480다섯

B52: 525다섯

1. BLRCH HDuty Heavy Duty Series (High harmonic sites, detuned reactor recommended; your series)

400다섯 (B40) Common for China

BLRCH025A030B40｜2.5/3kvar

BLRCH050A060B40｜5/6kvar

BLRCH063A075B40｜6.3/7.5kvar

BLRCH083A100B40｜8.3/10kvar

BLRCH104A125B40｜10.4/12.5kvar

BLRCH125A150B40｜12.5/15kvar

BLRCH150A180B40｜15/18kvar

BLRCH200A240B40｜20/24kvar (Your referenced model)

BLRCH250A300B40｜25/30kvar

440다섯 (B44, Preferred for 14% detuned branch)

BLRCH050A060B44｜5/6kvar

BLRCH104A125B44｜10.4/12.5kvar

BLRCH125A150B44｜12.5/15kvar

BLRCH150A180B44｜15/18kvar

BLRCH200A240B44｜20/24kvar

BLRCH250A300B44｜25/30kvar

BLRCH285A342B44｜28.5/34.2kvar

480다섯 (B48, 내보내다 / 60Hz systems)

BLRCH136A163B48｜13.6/16.3kvar

BLRCH170A204B48｜17/20.4kvar

BLRCH208A250B48｜20.8/25kvar

BLRCH339A407B48｜33.9/40.7kvar

BLRCH453A544B48｜45.3/54.4kvar

525다섯 (B52, High voltage-rise application)

BLRCH400A480B52｜40/48kvar

1. BLRCS EasyCan Standard Series (Low harmonic, simple PF correction, 저렴한 비용)

400다섯 (B40)

BLRCS025A030B40｜2.5/3kvar

BLRCS050A060B40｜5/6kvar

BLRCS083A100B40｜8.3/10kvar

BLRCS104A125B40｜10.4/12.5kvar

BLRCS125A150B40｜12.5/15kvar

BLRCS150A180B40｜15/18kvar

BLRCS200A240B40｜20/24kvar (Standard alternative of BLRCH200A240B40)

BLRCS250A300B40｜25/30kvar

440다섯 (B44)

BLRCS050A060B44｜5/6kvar

BLRCS125A150B44｜12.5/15kvar

BLRCS200A240B44｜20/24kvar

480다섯 (B48)

BLRCS170A204B48｜17/20.4kvar

BLRCS208A250B48｜20.8/25kvar

BLRCS315A378B48｜31.5/37.8kvar

BLRCS339A407B48｜33.9/40.7kvar

III. Matching OEM Reactor Series (LVR, replace legacy LRF)

LVR07xxxA40T: 7% 원자로, 400V 시스템, matched to corresponding kvar capacitor

LVR14xxxA40T: 14% 원자로, 400V 시스템

xxx = matched capacity code: 050 / 104 /125 /150 /200 /250

예: LVR07200A40T → 7%, matched for 20kvar capacitor branch

1. Obsolete Series (Do not specify for new design)
2. Varplus2 (legacy 513xx series), fully superseded by BLRCH
3. VarPlus Box oil-filled type BLR_VBHE, MEHVBENY, cabinet-mounted oil type, 단계적으로 폐지
4. Legacy LRF reactor (모두 5.7% variants discontinued)
5. 선택 비교

중요 사항:

1. This list covers mainstream stocked models in China market; special voltages such as 240V, 575V for overseas use are rarely available locally.
2. BLRCH200A240B40 marked for phase-out by manufacturer; new projects preferably evaluate BLRCH200A240B44.
3. Reactor percentage must be identical for all branches inside one PFC cabinet; 혼입 7% 그리고 14% branches is forbidden.