Chint NXBLE63 – 2P/C40

Chint NXBLE63 – 2P/C40 is a 2 – pólo (2P) miniature residual current circuit breaker. Its main parameters and functions are as follows:

Parâmetros principais

Corrente nominal: 40UM (“Q40” indicates that the tripping characteristic is Type C and the rated current is 40A);

Número do pólo: 2P (cuts off both the live wire and the neutral wire simultaneously);

Proteção de Corrente Residual: Tipo CA (detects ordinary AC leakage). The residual operating current is usually 30mA (an industry conventional value, and some models support options such as 50mA/75mA);

Quebrando Capacidade: 6o (can safely cut off circuits with a short – circuit current of not less than 6000A);

Tensão Aplicável: 230V (for single – circuitos de fase);

Mechanical/Electrical Life: A vida mecânica é 20,000 vezes, e a vida elétrica é 10,000 vezes.

Principais Funções

1. Proteção de Corrente Residual: When there is electric shock to the human body (current ≥ 30mA) or equipment leakage in the circuit, a fonte de alimentação é rapidamente cortada dentro 0.1 second to prevent electric shock casualties;
2. Proteção contra sobrecarga: If the circuit load is too large (current exceeds 40A), it will automatically disconnect to avoid overheating and fire of the circuit;
3. Curto – Proteção de Circuito: Quando ocorre um curto-circuito no circuito (current increases sharply in an instant), the circuit is cut off immediately to protect electrical appliances and the circuit;
4. Função de isolamento: It can be used as a switch for infrequent on – off of the circuit under normal conditions.

Cenários de aplicação

Eletricidade Doméstica: For high – power socket circuits in kitchens, salas de estar, etc.. (como aparelhos de ar condicionado, aquecedores elétricos de água), it replaces traditional air switches and adds residual current protection;

Pequeno – scale Commercial Places: For socket or lighting circuits in convenience stores and offices, meeting the electricity demand within 40A;

Decoration and Renovation: Upgrading the residual current protection of old circuits to meet the new national standard’s requirement that “socket circuits must be equipped with residual current protection”.

Installation and Use Precautions

– It should be selected according to the actual load of the circuit to avoid “a big horse pulling a small cart” ou “um pequeno cavalo puxando uma grande carroça”;

– Pressione o “botão de teste (T key)” once a month to verify whether the residual current protection function is normal;

– When installing, the live wire (eu) e o fio neutro (N) must be distinguished. If the wiring is reversed, the residual current protection function may fail.