Contator,disjuntor,inversor solar,medidor elétrico,baterias solares
O Interruptor de viagem Delixi JLXK1-411 is a plunger roller protected automatic reset travel switch.
Below is its detailed description:
Informações Básicas: Product code is C919049; packaging type is boxed; gross weight is 147.2 grams.
Parâmetros Técnicos: Rated operating voltage is AC 380V / DC 220V. Rated operating current is 0.3A for AC and 0.12A for DC. Rated heating current is 5A. Contact configuration is 1 normally open (NO) e 1 normally closed (NC). Actuating force ≤ 20N; over travel or angle ≥ 2mm; operating travel or angle is 1–3mm; contact switching time ≤ 40ms.
Structural Features: Adopts a horizontal roller design with a self-locking function. Once triggered by an object, it maintains the actuated state. Its angle and direction can be adjusted to adapt to different application scenarios.
Application Scope: Suitable for control circuits with AC 50Hz (or 60Hz) at rated operating voltage up to 380V or DC 220V for same-pole use. It can be used to control the stroke of moving mechanisms and change their motion direction.
The installation dimensions of the Delixi JLXK1-411 travel switch can refer to the general and dedicated marked data of the same product series. Based on the parameters in the product manual, the specific dimensional information is as follows:
| Dimensional Type | Specific Parameters |
| Mounting Hole Specification | Equipped with 2 mounting holes (diameter: 4.5milímetros, tolerance: 卤0.3) for basic fixation |
| Auxiliary Fixing Screw Hole | Provided with 2 M4 screw holes for auxiliary positioning or accessory assembly |
| Interface Specification | G1/2 inch interface, compatible with pipelines or connectors of corresponding specifications |
| Key External Related Dimensions | Partial related external dimensions can assist installation positioning, including 35卤0.31mm, 44milímetros (maximum dimension), etc.. Among the overall installation-related maximum external dimensions, the similar matching dimension is marked as 107mm (maximum), etc.. |
This set of dimensions is suitable for front-panel or rear-panel screw fixation installation. During installation, matching fasteners can be selected according to the above hole diameter and screw hole specifications. Meanwhile, installation space should be reserved based on the external related dimensions such as 35±0.31mm.
