FBs-40MCR2-AC Fatek PLC Main Unit

Explicação do código do modelo

Segmento de código	Descrição
FBs	Prefix for standard Fatek PLC série
40	Total de pontos de E/S: 40 (24 entradas + 16 saídas)
MC	High-performance main unit, different from MA/MB economy type and MN high-speed NC type
R	Tipo de saída: Saída de relé. Large contact capacity, suitable for AC and DC loads
2	Mark for 2nd generation upgraded version
AC	Fonte de energia: Wide voltage range 100~240VAC

Especificações principais

Categoria	Especificações detalhadas
Configuração de E/S	24-channel 24VDC digital inputs, 16-channel relay outputs
High-speed Inputs	6 channels @ 200KHz high-speed counting + 2 channels @ 20KHz medium-speed counting + 16 general inputs
High-speed Outputs	Relay outputs do not support high-speed pulse. Only transistor models (T/J) provide 6 channels @ 200KHz + 2 channels @ 20KHz
Communication Ports	Integrado 1 integrated RS232/USB port (Port0), expandable up to 5 communication ports in total
Program Memory	8KB (padrão), expandable to 16KB
Data Memory	4KB (padrão), expandable to 8KB
High-speed Counter	4 groups of Hardware High-speed Counters (HHSC), máx.. 200KHz; 4 groups of Software High-speed Counters (SHSC), máx.. 5KHz
Timers	0.1ms high-precision high-speed timers, supporting multiple timing modes
Instruction Set	Sobre 300 instructions, supporting multi-input & multi-output structures for high programming efficiency
Fonte de energia	100~240VAC, 50/60Hz, consumo de energia aprox.. 15C
Ambiente Operacional	Temperatura: -20~75°C; Umidade: 10~90% UR (sem condensação)
Dimensões	Montagem em trilho DIN padrão, aprox.. 100×100×75mm (refer to official data for exact size)
Certificações	CE, Certificado UL, em conformidade com as normas de segurança industrial

Comparação equivalente entre marcas

Marca	Modelo Equivalente	Principais diferenças
Siemens	S7-200 SMART SR40	FBs-40MCR2-AC features higher high-speed counting frequency (200KHz vs 100KHz) and a more streamlined instruction set
Mitsubishi	FX3U-40MR/ES-A	Fatek has built-in USB + RS232 dual ports (Mitsubishi requires extra expansion); Fatek delivers better high-speed counting performance
Omron	CP1E-N40DR-A	Larger program memory (8KB vs 6KB); stronger communication expansion capability (máx.. 5 portos)
Schneider Elétrica	M221C40R	More cost-effective; superior high-speed counting and pulse output performance

Full Model List of FBs-MC Series

Modelo	Pontos de E/S	Tipo de saída	Fonte de energia	Principais recursos
FBs-10MCR2-AC	10 (6IN/4OUT)	Relé	AC	Economy compact type, non-expandable
FBs-14MCR2-AC	14 (8IN/6OUT)	Relé	AC	Economy compact type, non-expandable
FBs-20MCR2-AC	20 (12IN/8OUT)	Relé	AC	Basic functional type, expansível
FBs-24MCR2-AC	24 (14IN/10OUT)	Relé	AC	Basic functional type, expansível
FBs-32MCR2-AC	32 (16IN/16OUT)	Relé	AC	High-performance type with built-in high-speed counting
FBs-40MCR2-AC	40 (24IN/16OUT)	Relé	AC	High-performance type, 6 channels 200KHz high-speed inputs
FBs-60MCR2-AC	60 (36IN/24OUT)	Relé	AC	High-performance type with large I/O capacity
FBs-40MCT2-AC	40 (24IN/16OUT)	Transistor (NPN)	AC	High-performance type, 6 channels 200KHz high-speed outputs
FBs-40MCJ2-AC	40 (24IN/16OUT)	Transistor (PNP)	AC	High-performance type with PNP output
FBs-40MCR2-D24	40 (24IN/16OUT)	Relé	CC24V	DC powered version

Falhas Comuns & Solução de problemas

Fenômeno de falha	Possíveis causas	Etapas de solução de problemas
Indicador de energia desligado	Damaged power cable, faulty power module, abnormal input voltage	1. Check power cable and socket
		2. Verify input voltage within 100~240VAC
		3. Inspect bulging capacitors on power module
		4. Replace power module for test
No response at input points	Fiação errada, defective sensor, faulty PLC input module	1. Check sensor power and wiring
		2. Medir a tensão de entrada (nominal 24VDC) with multimeter
		3. Replace sensor for test
		4. Check PLC input indicators
No action at output points	Fiação errada, faulty load, damaged relay contacts	1. Check load power and wiring
		2. Measure output terminal voltage
		3. Replace load for test
		4. Check PLC output indicators
		5. Replace relay module (se aplicável)
Falha de comunicação	Mismatched communication parameters, faulty cable, damaged port	1. Check baud rate, data bits and parity bits
		2. Inspect cable connection and shielding
		3. Replace communication cable
		4. Check communication indicators
		5. Try alternative communication ports
Program loss	Low battery voltage, incomplete program saving, memory failure	1. Check battery voltage (≥3V required)
		2. Re-download program and save to EEPROM
		3. Replace battery
		4. Inspect memory module

Aplicativo & Casos da Indústria

Cenários Aplicáveis

Máquinas de embalagem: Control conveyors, cutting, labeling and other actions; realize precise counting and positioning via high-speed counting function
Máquinas Têxteis: Control looms and knitting machines; support multi-axis synchronous operation
Processamento de Alimentos: Manage filling, sealing and sterilization processes; execute scheduled tasks via built-in calendar
Machine Tool Control: Control spindle and feed of small machine tools for basic positioning
Automação Predial: Regulate air conditioning, lighting and elevators; realize centralized monitoring via communication ports

Cenários não recomendados

High-precision high-speed positioning: Applications requiring pulse output over 200KHz (MN series recommended)
Controle de carga de alta potência: Single output load exceeding relay rated capacity (typically 2A/250VAC)
Severe electromagnetic interference: Environments without proper shielding, which may affect normal operation
Extreme temperature: Operating temperature beyond -20~75°C

Casos de aplicação típicos

Caso 1: Automatic Packaging Line Control System

Equipamento: Automatic packaging machine, transportador, labeler

Funções: Product counting, fixed-length film cutting, labeling position control, alarme de falha

Highlights: Precise counting via 6-channel 200KHz high-speed inputs; HMI interaction via RS232 communication; scheduled production with built-in calendar

Caso 2: Small Wastewater Treatment System

Equipamento: Water pumps, válvulas, level sensors, pH sensors

Funções: Automatic pump start/stop based on liquid level; automatic chemical dosing according to pH value; automatic standby switch upon fault

Highlights: High-power pumps and valves controlled by relay outputs; data transmission to host computer via communication expansion modules; periodic backwashing via built-in timers

Diretrizes de seleção & Regras de referência rápida
Dicas de seleção: Match I/O points to demands; select output type by load (relay for AC/DC universal use, transistor for high-speed pulse); choose power supply per on-site condition; select series by functions (MC: alto desempenho, MA: economy, Minnesota: high-speed positioning)
Quick Rules: