Hakko MONITOUCH V810iCN-080 IHM - Contator,disjuntor,sensor,Codificador,CLP,Conversor

Conversamos: +86-13184948252 Whatsapp: 0086-13811255435 E-mail: kent@bestcontactor.com

Sobre Contato |

Hakko MONITOUCH V810iCN-080 IHM - Contator,disjuntor,sensor,Codificador,CLP,Conversor

CLP/

Hakko MONITOUCH V810iCN-080 IHM

The V8 series HMI is discontinued. It is widely used on legacy equipment (por exemplo, Toshiba injection molding machines), featuring a 10.4-inch analog resistive industrial touchscreen. Model Code Definition V810: V8 series, 10.4-inch model i: Built-in LAN Ethernet port (V810iCN has no optional expansion unit port) C: Standard VGA (640×480) economy version N: Toque resistivo analógico ...

  • Detalhes do produto

The V8 series IHM foi descontinuado. It is widely used on legacy equipment (por exemplo, Toshiba injection molding machines), featuring a 10.4-inch analog resistive industrial touchscreen.

Definição de código de modelo

V810: V8 series, 10.4-inch model

eu: Built-in LAN Ethernet port (V810iCN has no optional expansion unit port)

C: Standard VGA (640×480) economy version

N: Analog resistive touch panel

080: DC24V power supply variant (suffix D also stands for DC24V; AC models have no such suffix)

Especificações básicas de hardware

Mostrar: 10.4″ LCD colorido TFT, 640×480 VGA, 65,536 cores

Touch type: Toque resistivo analógico

Luz de fundo: LIDERADO, rated service life approx. 70,000 horas

Memória: 4.5MB FROM for screen storage; 128KB SRAM (for recipes & alarm logs)

Proteção do painel frontal: IP65 (with original waterproof gasket), parte traseira IP20

Dimensões gerais: 303.8 × 231.0 × 69.0 milímetros

Panel cutout size: 289.0 × 216.2 milímetros (+0.5/-0 tolerância)

Rear Interface List

  1. LAN RJ45: 10/100Ethernet Mbps
  2. MJ1, MJ2 (8-pin modular): RS232/485
  3. D-Sub9 (CN1): RS232C / RS422/485
  4. USB-A (Hospedar), USB-B (Programming slave port)
  5. CF card slot (legacy CF card, not SD card)
  6. 24VDC power terminal block

Observação: V810iCN does NOT support GU video/RGB optional modules

Programas & Comunicação

Software de programação: V-SFT-5 / V-SFT-6 (V-SFT6 supports V8, V9 and V10 series simultaneously)

8-way multi-protocol communication: Conecte-se a 8 PLCs of different brands simultaneously (Mitsubishi, Siemens, Omron, Delta, controladores de temperatura, inversores, etc.)

Supported functions: Alarmes, gráficos de tendências, gerenciamento de receitas, macro scripts, PLC ladder transfer, USB printing, CF card backup for screens & logs

Opções de substituição (Discontinued Model Upgrade)

  1. Official Series Upgrade: V1010iC (10.4-polegada, identical cutout; project conversion via V-SFT automatic tool) – Top priority for direct replacement
  2. Domestic HMI Replacement: 10.4-inch local HMIs. Requires redeveloping project screens and reconfiguring communication protocols.

Lembrete importante: V8→V10 project conversion is irreversible. Always back up the original project before conversion.

Falhas Comuns & Dicas de manutenção

Typical failures: Unresponsive touch, touch offset, tela preta, backlight failure, communication loss, unreadable CF card

Peças de reposição: Painel de toque, Retroiluminação LED, power board, CF card, backup battery for SRAM

Nota de manutenção: Legacy CF cards are difficult to source. Use USB for program upload/download whenever possible.

Hakko MONITOUCH V8 Series (Hakko Electronics / Eletro Fuji) Lista completa de modelos

The entire V8 series is end-of-life (EOL).

Explicação do sufixo

eu: Built-in LAN Ethernet port; no i = no Ethernet port

S: High-performance model, supports GU RGB video optional modules

T: Mid-range model

C: Standard economy model (V810iCN belongs to this branch)

M: Simplified model exclusive to V806

CH: 7.5-inch handheld type

X: 15-inch XGA high-end model

N: Toque resistivo analógico; D / 080: Fonte de alimentação DC24V

5.7-polegada | V806 Series (320×240 QVGA)

V806M / V806iM

V806C / V806iC

V806T / V806iT

Power variants: V806iCD, V806iTD, V806iMD (CC24V)

7.5-polegada | Handheld Model V808CH

V808CH / V808iCH

8.4-polegada | V808 Series (640×480 VGA)

V808C / V808iC

V808S / V808iS

Power variants: V808iCD, V808iSD (CC24V)

10.4-polegada | V810 Series (640×480 VGA, your target model here)

V810C / V810iC (Versão econômica; V810iCN-080 falls here; iC version cannot install GU video modules)

V810T / V810iT (Intervalo médio, supports GU optional units)

V810S / V810iS (Alto desempenho, supports GU video/RGB modules)

Suffix variants: N (resistive touch), D/080 (CC24V), por exemplo, V810iCN, V810iTN, V810iSN

12.1-polegada | V812 Series (800×600 SVGA)

V812S / V812iS (Alto desempenho, supports GU video modules)

15-polegada | V815 Series (1024×768 XGA)

V815iX (V8 series flagship; Ethernet + entrada de vídeo)

Function Comparison Table

Model BranchBuilt-in LAN (eu)GU Video Module SupportPosicionamento
V8xxC (V810iC/V808iC)Optional i❌Economia (standard for injection molding machines)
V8xxT (V810iT)Optional i✅Mid-range general purpose
V8xxS (V810iS/V812iS/V808iS)Optional i✅Alto desempenho
V815iX✅✅15″ XGA top model
V806MOptional i❌5.7-inch entry-level
V808CHOptional i❌7.5-inch handheld

Optional Units (For V8i models with expansion port, excluding V810iC)

GU-00/01/02/03/10/11: RGB video input units; DUN-10: V806 dedicated expansion unit

Programas & Substituição

Software de programação: V-SFT5 / V-SFT6

Série oficial de atualização: V10 series (V1010iC is the preferred drop-in replacement for V810iCN, same cutout size; one-click project conversion in V-SFT6)

Replacement Model List for V810iCN-080 (Hakko MONITOUCH)

Key specs of original unit: 10.4-polegada, CC24V, Ethernet integrada, classe econômica, no video expansion port, cutout size: 289.0 × 216.2 milímetros

  1. Original Brand Upgrade (Primeira escolha: Project Migration, No Cutout Modification)

(1) Série V10 (Current Fuji/Hakko Mainstream, Official Recommended Replacement)

V1010iC-D (Escolha principal)

✅ Identical panel cutout; nenhuma modificação do gabinete necessária. V-SFT6 automatically converts V8 project files.

✅ Equipped with LAN, serial ports and USB; SD card replaces legacy CF card.

⚠️ Resolution upgraded from 640×480 to 800×600; screens auto-scale with minor control adjustments needed. Converted projects cannot be opened again on V8 software.

V1010iS-D (High-end Alternative)

Supports video input with higher performance, same cutout dimensions for future video expansion needs.

(2) Série V9 (Transitional Discontinued Model, Only Stock Available)

V9100iC (Official designated replacement for V810iC series)

Project migration via V-SFT6. Stock availability is limited; not the first choice.

(3) V8 Series Spare Replacement (Only for Used Secondhand Parts, Not for New Purchases)

V810iTN-080 / V810iSN-080

Same outline & cutout size; extra video expansion port. The original V810iCN cannot fit GU modules, while iTN/iSN support video add-ons. Project files can be downloaded directly without modification.

  1. Domestic HMI Replacement (Project Reconfiguration Required)

Selection criteria: 289×216mm cutout, 10.4-polegada, CC24V, Ethernet + RS485/232 ports

Weintek: MT8106iP / MT8106iE (Check cutout carefully; adapter plate may be needed)

Kunlun Tongtai: TPC1061Ti (Verify cutout dimensions)

Kinco / Xinje: Most 10.4-inch high-end models require custom adapter panels or cabinet re-cutting.

Desvantagem: V-SFT project files cannot be imported directly; full re-configuration and communication debugging required.

Selection Comparison Table

Modelo de substituiçãoNo Cutout ModificationDirect Project MigrationVideo Module SupportStatus de fornecimento
V1010iC-D✅✅ (V-SFT6 conversion)❌Commercially available
V1010iS-D✅✅✅Commercially available
V9100iC✅✅❌Descontinuado, only stock/used
V810iTN/080✅✅✅Descontinuado, secondhand only
Domestic 10.4″ IHMAdapter plate may be needed❌, full re-programmingDepends on modelAbundant stock

Critical Migration Notes

  1. Back up the original V8 project file before conversion; V8→V10 conversion is irreversible.
  2. Recipes and alarm logs stored on the original CF card must be exported and imported separately after migration.
  3. Protocolos de comunicação (Mitsubishi MC, Siemens S7, Omron Hostlink, etc.) are fully compatible with V10; protocol parameters remain almost unchanged.
  4. Terminal pin assignments, 24V power and serial pinouts differ. Always cross-check the V10 manual before wiring.

Anterior:

Próximo:

Deixe uma resposta

Deixe um recado