CLP Omron CP1E-N30DT-D

2. Especificações Técnicas Principais

3. Características
4. Tri-port Communication: Built-in USB, RS-232C, RS-485 ports for multi-device connection without extra modules
5. Modbus RTU Simple Master: Directly controls inverters and other Modbus slave devices
6. High-speed Counting: Suporta 4 channels of high-speed counters (até 100kHz) for position control
7. Saída de pulso: 2 channels of pulse output (até 100kHz) for simple positioning of stepper/servo motors
8. Data Retention: Onboard EEPROM retains programs and data without a battery
9. Resposta rápida: Input response time configurable to 0.1ms for high-speed detection
10. Design Compacto: Small dimensions (W90×H90×D85mm) to save control cabinet space
11. Ambiente Operacional

5. Aplicativos
6. Equipamentos de automação pequenos (máquinas de embalagem, máquinas de etiquetagem)
7. Standalone production line control
8. Sensor data acquisition and processing
9. Inverter speed control (via RS-485)
10. Simple positioning control systems (XYZ stages)
11. Building automation and security systems
12. Modelos Alternativos

CP1E-N30DT-D (Omron economical 30-point PLC, 18 entradas / 12 transistor sink outputs) is designed for small standalone machines, logic control, simple positioning, and communication networking. It is widely used in light industry, embalagem, máquinas-ferramentas, custom machinery, AVAC, and security systems. Below are practical industry application examples with matching configurations.

1. Embalagem & Máquinas Alimentares (Mais Comum)

1.1 Vertical Tea Bag / Granule Packaging Machine

Configuração: CP1E-N30DT-D + 2 sensores fotoelétricos + 2 stepper motors (film feed / cortador) + temperature module (CP1W-TS) + NB3Q HMI

Funções de controle:

Film length positioning (100kHz pulse output)

Color mark tracking and automatic compensation

Temperature closed-loop control, feeding / sealing sequence

Fault alarm and production counting

Vantagens: 30 points fully cover sensors, valves and pulses; three serial ports (USB/232/485) directly connect HMI and inverter.

1.2 Semi-automatic Carton Sealing / Labeling Machine

I/O Assignment:

Entradas: Começar, E-stop, label out, in-position, counter, porta de segurança

Resultados: Labeling cylinder, winding motor, transportador, alarm lamp, fã

Comunicação: RS-485 for inverter speed reading; Modbus for barcode scanner connection.

2. Máquinas-ferramentas / Grinders / Custom Machinery

2.1 Superfície / Cylindrical Grinder Feed Control

Configuração: CP1E-N30DT-D + 2-axis servo + codificador + pressure sensor + NB7W HMI

Funções:

Rapid feed / working feed / rapid retreat sequence

Feed speed profile and pressure monitoring

Dimensional compensation and automatic tool retraction

Aplicativo: Precision grinding of bearings, cutters and molds.

2.2 Small Drilling / Milling / Tapping Machine

Controlar:

3-axis point-to-point control (X/Y/Z)

Workpiece clamping → spindle start → feed → retraction → release

Overload protection and tool life management

E/S: Proximity switches, limits, hydraulic valves, cooling pump, counter, mode selection.

3. Conveying / Sorting / Warehousing (Light Duty)

3.1 Small Sorting Line

Aplicativo: Sorting electronic / hardware parts by material or color

Configuração: N30DT-D + fotoelétrico / fiber sensors + pushing cylinder + variable-speed conveyor

Lógica:

In-position detection → delay → push → reset → count

Multi-speed control, interlock, full-load stop

3.2 Automated Parking / Parking Guidance

Controlar:

Loop / ultrasonic parking detection

Traffic light / display guidance

Anti-fall protection, timeout alarm, zone interlock

Points: 18 inputs for detectors / botões; 12 outputs for lights, displays and gates.

4. AVAC / Air Conditioning / Constant Pressure Water Supply

4.1 Constant Temperature & Humidity Unit / Clean Air Conditioning

Configuração: N30DT-D + CP1W-TS (4-channel temperature) + analog module (CP1W-MAD)

Controlar:

Compressor / fã / humidifier / dehumidifier valve sequencing

PID temperature and humidity control, intertravamentos de segurança

RS-485 connection to HMI / central monitoring

4.2 Small Constant Pressure Water Supply (1 drive 2 / 1 drive 3)

Solução:

Entradas: Water pressure, high/low water level, falta, auto/manual

Resultados: Bombear 1, Bombear 2, alarme, valve

Comunicação: RS-485 Modbus for inverter frequency control

Aplicativo: residencial, factory or construction site water supply.

5. Eletrônica / Semicondutor / Testing Equipment

5.1 Semi-automatic Testing / Press Machine

Basic Logic:

Sensor → delay → cylinder press → hold → reset → buzzer

Simple ladder logic with under 20 passos, economical replacement for relay panels

Expansão: Contando, batch management, NG alarm, data upload.

5.2 Bateria / Capacitor / Hardware Assembly Machine

Controlar: Loading → positioning → gluing / welding → inspection → unloading

Alta velocidade: 6 fast-response inputs (0.1EM) + 100kHz high-speed counting.

6. Proteção Ambiental / Tratamento de Água

Dosing / Agitation / Filtration:

Nível, flow, PH, ORP digital / analog signals

Bombear / valve sequence, timed backwash, fault interlock

Aplicativo: Small wastewater treatment, pure water equipment, pool circulation.

7. Education / Treinamento / Graduation Projects

Traffic Light Control:

Straight / left turn / pedestrian / yellow light / countdown

Vehicle detection, pedestrian request, coordinated signal timing

PLC Training Platform: Lógica, timing, contando, stepping, posicionamento, Modbus experiments.

8. Vantagens de seleção
9. Optimal 30-point layout: 18 entradas / 12 saídas, covers most standalone machines without expansion
10. Three serial ports: USB (depuração) + RS-232 (IHM) + RS-485 (inverter / instrument)
11. Alta velocidade: 0.1μs basic instructions, 100kHz pulse/counter, 0.1ms fast input
12. Battery-free data retention: EEPROM stores programs and data, maintenance-free
13. Baixo custo, compactar, confiável: Ideal for mass-produced, cost-sensitive equipment
14. Modelos de substituição direta

Relay output: CP1E-N30DR-D (Compatível com CA/CC, 2Um por ponto)

Transistor source output: CP1E-N30DT1-D (Saída PNP)

40/60-point versions: N40DT-D / N60DT-D (direct expansion)

Below is the complete Omron PLC model list (copy-paste ready for Excel) sorted by series, including series, modelo, E/S, output type and description.

Complete Omron PLC Model List (Excel Compatible)

1. CP1E Series (Economical Compact PLC)

2. CP1L Series (Aprimorado, Most with Ethernet)

3. CP1H Series (High-performance Compact PLC)

4. CP2E Series (New Generation Compact PLC, Ethernet padrão)

5. CJ2 Series (Modular Mid-range PLC)

6. NJ / NX Series (Machine Automation Controllers)

7. Legacy Models (Spare Parts & Manutenção)