Contator,disjuntor,inversor solar,sensor,Codificador,CLP
Status: Old model discontinued (legacy E2E series), superseded by E2E-NEXT series
Interpretação do modelo
E2E: Omron padrão inductive proximity sensor série
X5M: Não blindado (montagem não embutida), nominal sensing distance 5 mm, M12 threaded barrel
E: CC de 3 fios
1: NPN normalmente aberto (NÃO)
Especificações elétricas principais
| Item | Especificação |
| Distância de detecção | 5 milímetros (non‑shielded / não nivelado) |
| Dimensões | M12×78 mm, nickel‑plated brass housing |
| Fonte de energia | DC 10‑30 V |
| Saída | 3‑wire NPN Normally Open (NÃO) |
| Máx.. Corrente de carga | 200 mA |
| Frequência de resposta | 400 Hz |
| Cabo | Standard 2 m PVC cable |
| Proteção de entrada | IP67 |
| Temperatura operacional | -25℃～+70℃ |
| Proteção | Polaridade reversa, curto-circuito, proteção contra sobrecarga |
| Standard Target | 15×15×1 mm cold‑rolled steel |
Definição de fiação (3-wire Cable)
Marrom: CC+ (Poder Positivo)
Azul: 0 V (Potência Negativa)
Preto: Saída de sinal NPN
Operação: When metal approaches within 5 mm, black wire conducts to blue wire; yellow LED indicator illuminates.
Notas de instalação
- Non-shielded type, do NOT flush-mount into metal bore. Maintain metal clearance around sensing face; flush mounting will drastically reduce sensing distance.
- Supplied with 2 pcs M12 lock nuts.
- Actual sensing distance decreases for non-ferrous targets (cobre, alumínio).
Cross-Reference Part Numbers in Same Series
E2E-X5ME1: NPN normalmente aberto (original part)
E2E-X5ME2: NPN normalmente fechado (NC)
E2E-X5MF1: PNP normalmente aberto (NÃO)
E2E-X5MF2: PNP normalmente fechado (NC)
E2E-X5ME1-M1: M12 connector version (replaces cable-type)
Discontinued Model Replacement Recommendations
- Genuine Omron Upgrade: E2E-NEXT series E2E-X5C112-M1TJ, M12 cable type, 5 mm non-shielded, NPN-NO, improved performance and full compatibility.
- Equivalente Doméstico: M12, non-shielded 5 mm, NPN-NO, DC10-30 V, IP67 proximity sensor.
Solução de problemas comuns
- LED não acende: Verify brown/blue power polarity and 10-30 VDC supply.
- LED lights but no output: Incorrect load wiring. For NPN output, connect load between brown positive and black signal wire.
- Shortened sensing distance: Sensor is sunken into metal, or target material is non-ferrous.
Replacement Options for E2E-X5ME1
Original Part: E2E-X5ME1, M12, non-shielded (Sn=5 mm), CC de 3 fios, NPN Normally Open NO, 2 m cable, IP67. Legacy E2E series discontinued.
Critical requirements: M12 barrel, montagem não embutida, 5 mm distância de detecção, NPN-NO, DC10-30 V, 3-wire 2-meter cable (Brown-Blue-Black).
- Genuine Omron Official Replacements (E2E-NEXT series — Preferred)
| Peça de reposição | Descrição | Diferença |
| E2E‑X5C112‑Z 2M | Cable‑type direct replacement, 5 mm non‑shielded, NPN‑NO, 2 m cable, compatible mechanical mounting. | Slightly shorter housing; enhanced electrical protection & noise immunity; identical pin‑out, drop‑in replacement without wiring modification. |
| E2E‑X5MC112‑M1 | M12 connector version, no cable; requires separate M12 straight cable. | For quick‑disconnect applications; cannot reuse original 2 m cable. |
Fiação: Brown = Power+, Blue = 0 V, Black = NPN output. LED operation identical to E2E-X5ME1.
- Omron Legacy Stock / Usado (Only for emergency maintenance; not for new projects)
E2E-X5ME1-Z: Revised suffix variant, identical specifications, old stock only.
Observação: High counterfeit risk. Do not specify for new equipment.
- Other Imported Brand Drop-in Equivalents (1:1 correspondência de parâmetro)
- Schneider XS2-M12MA230
M12 non-shielded 5 mm, NPN-NO, DC12-24 V, 2 m cable, IP67; compatible mounting dimensions and wiring.
- Pepperl+Fuchs NBB5-12GM50-E0
M12, Sn=5 mm, NPN-NO, 3-wire 2 m cable; superior noise immunity, ideal for high-frequency applications.
- Alternativas Domésticas (Otimizado em termos de custos, retrofitting / peças de reposição)
Especificações: M12, non-shielded 5 mm, NPN-NO, DC10-30 V, 2 m output, IP67
- LJ12A3-5-Z/BX: General-purpose domestic sensor, 5 mm non-shielded, NPN-NO, econômico.
- GC-E2E-X5ME1: Form-fit copy of Omron unit, identical housing dimensions for direct field replacement.
⚠️ Replacement Precautions
- Non-shielded sensor must not be flush-mounted into metal bore. Maintain same installation clearance as original, otherwise sensing performance degrades.
- NPN wiring remains unchanged: connect load between brown positive supply and black signal output.
- If PLC input is PNP type, above models cannot be used; select PNP-NO variant instead.
- E2E-NEXT delivers improved response frequency and metal interference resistance compared to legacy E2E-X5ME1, drop-in compatible for most scenarios.
Complete Technical Datasheet — Omron E2E-X5ME1
Status: Obsoleto / Descontinuado. Legacy E2E inductive proximity sensor, M12 non-shield, 3-wire NPN-NO, 2 m cable.
Análise do modelo: E2E(série)-X5M(non-shielded Sn=5 mm M12)-E(NPN DC 3-wire)-1(Normalmente aberto NÃO)
🔌 Electrical Ratings
| Item | Especificação |
| Tipo de sensor | Sensor de proximidade indutivo, metal‑only detection |
| Montagem | Não blindado (Non‑Flush) |
| Nominal Sensing Distance Sn | 5 milímetros (standard target: 15×15×1 mm cold‑rolled steel) |
| Effective Operating Distance | 0‑4.5 mm |
| Tensão de alimentação | DC 10‑30 V (ripple ≤10% p‑p) |
| Saída | DC 3‑wire NPN open‑collector, Normalmente aberto NÃO |
| Máx.. Corrente de carga | 200 mA |
| Tensão Residual | ≤3 V @ 100 mA load |
| No‑load Current Consumption | ≤0.8 mA |
| Frequência de resposta | 400 Hz |
| Proteção | Polaridade reversa, curto-circuito, proteção contra sobrecarga |
| Indicador | LED amarelo, illuminates upon metal detection |
📐 Mechanical Specifications
| Item | Especificação |
| Tamanho da linha | M12×1 cylindrical thread |
| Comprimento total | 78 milímetros (including threaded section) |
| Material da Habitação | Latão niquelado; sensing face PBT resin |
| Cabo | 2 m standard PVC cable (Brown‑Blue‑Black) |
| Accessories Supplied | M12 lock nuts ×2 |
| Peso | Aprox.. 70 g |
🌍 Environmental Ratings
| Item | Especificação |
| Proteção de entrada | IP67 (IEC60529) |
| Temperatura operacional | -25℃～+70℃ |
| Temperatura de armazenamento | -40℃～+85℃ |
| Umidade Ambiente | 35‑95 %RH, sem condensação |
| Resistência à vibração | 10-55 Hz, amplitude 1.5 mm, X/Y/Z axis 2 hours each |
| Resistência ao choque | 500 m/s², X/Y/Z axis 3 shocks each |
| Conformidade | Compatível com RoHS |
🧵 3-wire Cable Pinout
Marrom: Potência DC Positiva (+)
Azul: Alimentação CC negativa (0 V)
Preto: Saída de sinal NPN
NPN wiring rule: Connect load between brown positive supply and black signal wire. Do not connect black wire to 0 V.
Operação: When metal enters sensing zone, black-blue path conducts and LED turns on; opens when target moves away.
📎 Sensing-Distance Derating by Target Material
Nominal 5 mm applies only to ferrous steel
Ferro / Cold-rolled steel: 5 milímetros (avaliado)
SUS304 Stainless steel: aprox.. 3.5-4 milímetros
Alumínio: aprox.. 2-2.5 milímetros
Latão / Cobre: aprox.. 1.5-2 milímetros
⚠️ Critical Installation Instructions
- Never flush-mount non-shielded sensor into metal housing. Maintain metal clearance around sensing face; flush mounting causes reduced range or total failure.
- Side-by-side sensor installation: keep metal separation ≥15 mm between units to prevent mutual interference & falso acionamento.
- Sensing distance reduces if target size is smaller than standard test piece.
📌 Related Variants
E2E-X5ME1-Z: Revised version, identical specs, old stock
E2E-X5ME1-M1: M12 connector-type, no cable, requires mating cordset
✅ Official Direct Replacement
E2E-X5C112-Z 2M (E2E-NEXT series). M12 non-shielded, 5 milímetros, NPN-NO, 2 m cable. Pin-to-pin & montagem compatível, enhanced noise performance. Preferred for new projects.
