Contato Fênix 2904603 Industrial DIN Rail Switching Power Supply - Contator,disjuntor,sensor,Codificador,CLP,Conversor

Conversamos: +86-13184948252 Whatsapp: 0086-13811255435 E-mail: kent@bestcontactor.com

Sobre Contato |

 Contato Fênix 2904603 Industrial DIN Rail Switching Power Supply - Contator,disjuntor,sensor,Codificador,CLP,Conversor

CLP/

Contato Fênix 2904603 Industrial DIN Rail Switching Power Supply

Modelo Completo: QUINT4-PS/1AC/24DC/40 ✅ Basic Specifications Order No.: 2904603 Série: QUINT4 (4th-generation QUINT POWER high-end power supply) Entrada: Single-phase 100…240 V AC Output: 24 Em DC, 40 UM, potência nominal 960 W Mounting: DE 35 mm rail mounting Key Features: SFB Selective Fuse Breaking, NFC parameter configuration, free characteristic curve, wide temperature operation, pre-warning signal ...

  • Detalhes do produto

Modelo Completo: QUINT4-PS/1AC/24DC/40

✅ Especificações básicas

Pedido nº.: 2904603

Série: QUINT4 (4th-generation QUINT POWER high-end fonte de energia)

Entrada: Single-phase 100…240 V AC

Saída: 24 Em DC, 40 UM, potência nominal 960 C

Montagem: DE 35 montagem em trilho mm

Principais recursos: SFB Selective Fuse Breaking, NFC parameter configuration, free characteristic curve, wide temperature operation, pre-warning signal output

✅ Core Advantages

  1. SFB Selective Fuse Breaking: Only the downstream protection trips in case of branch short-circuit; the main power supply remains online without lockout, widely used in automated production lines.
  2. NFC Interface: Read parameters, adjust voltage, set alarm thresholds and export reports directly via mobile APP.
  3. Parallel redundancy supported, suitable for high-power control cabinets, PLC clusters and servo power supply.
  4. Zero-clearance side-by-side installation; no extra heat dissipation gap required.

✅ Cross-References & Substituições

Previous generation: QUINT-PS/1AC/24DC/40 (Número do pedido. 2866789, descontinuado); 2904603 is the direct upgraded replacement.

Lower-power models in the same series: 2904597, 2904598, 2904599, 2904600, 2904601, 2904602.

✅ Brief Specification Summary

ItemParâmetro
Tipo de entrada1-fase CA, wide-range AC/DC compatible
Saída24 Em DC, 40 UM
Classificação de potência960 C
Classe de ProteçãoIP20
Temperatura operacional-25 ℃ ~ +60 ℃
ComunicaçãoNFC

✅ Common Matching Accessories

Módulo de redundância: QUINT-ORING

UPS unit: QUINT-UPS 24 Série V

QUINT4-PS/1AC/24DC/40 (2904603) Full Technical Data

  1. Core Datasheet (English Version)

Pedido nº.: 2904603 | Série: QUINT4 high-end power supply with SFB | Single-phase input, 24 V 40 UM, 960 C

Input Ratings

Tensão CA: 100~240 V AC (-15% ~ +10% tolerância), stable operation from 85~264 V AC

DC input compatible: 90~300 V DC (≤250 V DC per UL standard)

Faixa de frequência: 45~65 Hz

Built-in slow-blow input fuse: 20 UM

Terminais: eu / N / Educação Física, terminais de parafuso; comprimento de decapagem 7 milímetros, max conductor cross-section 6 mm²

Output Ratings (SFB & BOOST are core functions)

Nominal: 24 Em DC, 40 UM; adjustable voltage range 18~29.5 V

Static Boost: 45 A continuous (-25℃ ~ 40 ℃)

Dynamic Boost: 60 Um para 5 segundos, to handle servo inrush current

SFB Selective Fuse Breaking peak: 215 UM / 12~15 ms

Função principal: Downstream branch short-circuit only trips the downstream circuit breaker, main power supply keeps running without shutdown

Residual ripple: < 50 mVpp

Proteção contra sobretensão OVP: aprox.. 32 Em DC

Supports parallel redundancy and series voltage boosting; multi-unit current sharing. Recommended with QUINT-ORING redundancy module.

Output terminals: CC+, CC(tipo de parafuso); max conductor cross-section 16 mm², comprimento de decapagem 10 milímetros

Signal Terminals (Push-in spring terminals)

  1. DC OK: Passive relay contact 13/14, closed normally; opens when Uout < 0.9×24 V for PLC fault alarm.
  2. I<IN (load pre-warning): Triggers when load current drops below the set threshold; threshold editable via NFC.
  3. REM remote enable: Short REM to SGnd = power ON; open circuit = sleep mode (output OFF).
  4. NFC: Fênix QUINT POWER APP; read voltage, current and fault logs, adjust BOOST/SFB curves and export reports.
  5. Other Single-Phase 1AC Models (SC Screw Terminals)

12 Saída CC V

Número do pedido.ModeloSaídaPoder
2904605QUINT4-PS/1AC/12DC/2.5/SC12 V 2.5 UM30 C
2904607QUINT4-PS/1AC/12DC/7.5/SC12 V 7.5 UM90 C
2904608QUINT4-PS/1AC/12DC/15/SC12 V 15 UM180 C

5 Saída CC V

Número do pedido.ModeloSaídaPoder
2904595QUINT4-PS/1AC/5DC/5/SC5 V 5 UM25 C

48 Saída CC V

Número do pedido.ModeloSaídaPoder
2904610QUINT4-PS/1AC/48DC/5/SC48 V 5 UM240 C
2904611QUINT4-PS/1AC/48DC/10/SC48 V 10 UM480 C
2904612QUINT4-PS/1AC/48DC/20/SC48 V 20 UM960 C

Dual Output 2×15 V

Número do pedido.ModeloSaída
2904596QUINT4-PS/1AC/2X15DC/2/SC2×15 V, 2 A each

III. Single-Phase 1AC | PT Push-In Spring Terminals (Screw-Free, mesmo poder, Número do pedido. começando com 2909575)

Número do pedido.ModeloSaída
2909575QUINT4-PS/1AC/24DC/1.3/PT24 V 1.3 UM
2909576QUINT4-PS/1AC/24DC/2.5/PT24 V 2.5 UM
2909577QUINT4-PS/1AC/24DC/3.8/PT24 V 3.8 UM
  1. 3-Phase 3AC Input | 24 V Models (High-power 3-phase version with identical QUINT4 SFB technology)
Número do pedido.ModeloSaídaPoder
2904620QUINT4-PS/3AC/24DC/524 V 5 UM120 C
2904621QUINT4-PS/3AC/24DC/1024 V 10 UM240 C
2904622QUINT4-PS/3AC/24DC/2024 V 20 UM480 C
2904623QUINT4-PS/3AC/24DC/4024 V 40 UM960 C
  1. Common Series Features (Todos os modelos)
  2. All units equipped with SFB Selective Fuse Breaking + Dynamic Boost + NFC mobile configuration.
  3. SC = screw terminal; PT = Push-in spring terminal.
  4. Zero-clearance side-by-side mounting, parallel redundancy, DC OK dry contact alarm, REM remote ON/OFF supported.
  5. Direct replacement for legacy QUINT-PS series (Número do pedido. 2866xxx); pin assignment fully compatible, plug-and-play.
  6. Short Purchasing List (Apenas 24 V single-phase screw terminal models)

2904597 / 2904598 / 2904599 / 2904600 / 2904601 / 2904602 / 2904603

Anterior:

Próximo:

Deixe uma resposta

Deixe um recado