Phoenix Contact UM-IC14/8DI/F/LA/S7 Interface Module

This is a VARIOFACE series 8-channel passive digital input interface module manufactured by Contato Fênix. Order number: 2902894. It is specially designed for Siemens S7-300/ET 200M systems, equipped with fuse protection and signal indicator lights, and adopts knife terminal wiring mode.

1. Interpretação de código modelo

2. Parâmetros técnicos principais

3. Cross-brand Compatibility List

4. Full UM-IC14 Series Model List

5. Falhas Comuns & Guia de solução de problemas

6. Cenários de aplicação & Industry Cases

Cenários Aplicáveis

1. Automação Industrial: Collect digital signals for Siemens S7-300/ET 200M systems, connect sensors, push buttons and limit switches
2. Fabricação Automotiva: Monitor operating status of production line equipment, detect signals of stamping, welding and assembly stations
3. Comida & Beverage Industry: Position detection and status feedback for packaging and filling lines, meeting food-grade environmental requirements
4. Logística & Warehousing: Signal acquisition for stackers and conveyors in automated warehouses, adapt to frequent start-stop operation
5. Water Treatment Industry: Monitor pump stations and valves, suitable for humid working environments

Non-recommended Scenarios

1. Unprotected outdoor environments: IP20 rating vulnerable to dust and moisture erosion
2. Severe electromagnetic interference environments: Without dedicated shielding structure, extra protection is required
3. Alta temperatura & high humidity environments: Ambient temperature over +55°C or humidity above 95% will shorten module service life
4. Severe vibration and impact occasions: Standard installation without anti-vibration reinforcement design

Casos de aplicação típicos

Caso 1: Auto Parts Production Line

An auto parts manufacturer adopts this module to connect S7-300 PLC with 20 proximity switches for stamping mold position and status monitoring. The built-in fuse effectively avoids PLC damage caused by sensor short circuit; indicator lights realize rapid fault diagnosis, raising maintenance efficiency by 40%.

Caso 2: Intelligent Warehousing System

An e-commerce logistics center applies this module in automated stereoscopic warehouses to connect limit switches, photoelectric sensors and safety door switches of stackers. The 8-channel design saves cabinet space; its compatibility with both PNP and NPN sensors simplifies equipment selection, achieving stable operation for 2 consecutive years.

7. Air Transport Compliance & Informações de certificação

8. Mnemônico de seleção

Choose UM-IC14 for S7 input modules,

8 channels with fuses and indicators available;

Knife terminals ensure fast wiring,

Phoenix Contact part number: 2902894.

Supplementary Note about 2902888

Conclusão: 2902888 is NOT a product of Phoenix Contact.

It is the Element14 distributor part number for NorComp 15-pin right-angle female D-Sub connector, original model: 174-E15-213R461.

Phoenix Contact has a similar number 2900288, which refers to PLC-BPT-230UC/21-21 relay socket, please distinguish them clearly.

1. Explicação do código do modelo

2. Parâmetros técnicos principais

3. Cross-brand Alternative List

4. NorComp 174-E Series Full 15-pin Model List

5. Falhas Comuns & Solução de problemas

6. Cenários de aplicação & Casos Típicos

Cenários Aplicáveis

1. Automação Industrial: PLC communication port, HMI connection, sensor signal transmission (S7-300/ET 200M system etc.)
2. Equipamento Médico: Data interface for monitors and analyzers (medical certified models required)
3. Teste & Medição: Connection for oscilloscopes, signal generators to ensure accurate signal transmission
4. Communication Equipment: Serial port connection for modems and routers, support RS-232/422/485 protocols
5. Eletrônica Automotiva: On-board diagnostic (OBD) interface, adapt to wide-temperature working environment

Non-recommended Scenarios

1. Ar livre & ambientes úmidos: IP00 rating without moisture-proof design
2. High-frequency high-speed transmission: Limited bandwidth not suitable for signal above 100MHz
3. Vibração severa & impact occasions: Standard type without shockproof structure, reinforced version required
4. Comida & pharmaceutical clean workshops: Fail to meet hygiene standards, stainless steel housing type needed

Casos de aplicação típicos

Caso 1: PLC Control for Automotive Production Line

An automobile manufacturing plant uses this connector to connect S7-1200 PLC and HMI touch screen. Right-angle installation saves 30% cabinet space; gold-plated contacts guarantee long-term stable communication, realizing 3 years trouble-free operation and 50% menor custo de manutenção.

Caso 2: Data Acquisition for Medical Devices

A medical device manufacturer applies this connector in blood analyzers to link sensor modules and main control boards. The 15-pin design meets multi-parameter synchronous transmission demands; its wide-temperature property adapts to lab environment changes, e CE & RoHS certifications satisfy medical industry standards.

7. Air Transport Compliance & Certificação

8. Mnemônico de seleção

Three steps for D-Sub selection: confirm pin number 15, right-angle direction and female type;

Take electrical 5A/250V and mechanical 500 cycles into consideration, match actual working environment;

Belong to NorComp 174-E series, 2902888 is only Element14 order number.