RS20-0800M2T1SDAUHC cannot directly replace RS20-0800M2T1TDAUWVV - Contactor,circuit breaker,solar inverter,electric meter,solar batteries

Wechat: +86-13184948252  WhatsaApp: 0086-13811255435  E-mail:  kent@bestcontactor.com

About    Contact    |    

RS20-0800M2T1SDAUHC cannot directly replace RS20-0800M2T1TDAUWVV - Contactor,circuit breaker,solar inverter,electric meter,solar batteries

Trade News

RS20-0800M2T1SDAUHC cannot directly replace RS20-0800M2T1TDAUWVV

RS20-0800M2T1SDAUHC cannot directly replace RS20-0800M2T1TDAUWVV.

There are critical differences in software functions, protection level and certifications between the two models. Direct replacement will result in failure to meet the core requirements of the original application.

  1. Key Differences Comparison
ItemOriginal Model RS20-0800M2T1TDAUWVVReplacement Model RS20-0800M2T1SDAUHCImpact
Software LevelTDA (Layer 2 Enhanced Management)SDA (Layer 2 Basic Management)Key functions such as VLAN, IGMP snooping, HIPER-Ring/MRP ring redundancy, RSTP/MSTP are missing, greatly reducing network reliability and manageability
Special ProtectionWVV (Conformal coating)HC (High protection/dustproof, typically IP65/IP67 or dedicated dust rating)Different coating types: WVV focuses on moisture and corrosion resistance, while HC focuses on dust protection; they are not fully equivalent
Hazardous Location CertificationClass I Div 2 (suffix A)Not certifiedNot suitable for flammable and explosive hazardous areas such as petrochemical and mining sites
Operating Temperature-40…+70°C (wide temperature range)Normally 0…+60°C (standard temperature)Cannot adapt to extreme temperature environments such as outdoor and vehicle-mounted applications
  1. Replacement Recommendations

For a full replacement, select a model with matching functions, protection and certifications. Priority recommendations:

RS20-0800M2T1TDAUWVV (identical model, ensures all specifications match)

If uplink ports need adjustment, choose models in the same series with enhanced management, wide temperature and conformal coating, such as:

RS20-0800S2T1TDAUWVV (single-mode fiber instead of multimode)

RS20-0800M2M2TDAUWVV (dual fiber uplinks)

  1. Selection Notes

Before replacement, confirm the mandatory requirements for ring redundancy, hazardous location certification and wide temperature range on site.

If only basic connectivity is required without ring network or hazardous area needs, RS20-0800M2T1SDAUHC may be considered, but network design and environmental compliance must be re-evaluated.

The core attributes of RS20-0800M2T1TDAUWVV are:

8 ports, Layer 2 enhanced management (TDA), 1 multimode fiber + 1 copper uplink, wide temperature (-40°C), Class I Div 2 approval, WVV conformal coating.

Below is a precise list of alternatives in four categories: direct equivalent, function downgrade, port variant, cross-series upgrade (sorted by recommendation).

  1. Direct Equivalent Replacements in the Same Series (1:1, risk-free)
  2. Identical Standard Model (First Choice)

RS20-0800M2T1TDAUWVV

Order No.: 943434-365

Matches: TDA enhanced + U wide temp + A hazardous location + WVV coating

  1. Similar Specs, Minor Coating/Certification Adjustment (Second Choice)

RS20-0800M2T1TDAUHC

Difference: HC dustproof replaces WVV conformal coating; no Class I Div 2 certification

Application: Non-hazardous areas, high dust, moderate humidity

Order No.: 943434-265HC

RS20-0800M2T1TDAU

Difference: No WVV coating, no Class I Div 2 certification

Application: General wide-temperature industrial environments

Order No.: 943434-165

  1. Port Variant Replacements in the Same Series (Different uplinks, otherwise identical)
  2. Dual Copper Uplinks (No Fiber)

RS20-0800T1T1TDAUWVV

Uplink: 2×RJ45 copper ports

Order No.: 943434-375

  1. Dual Multimode Fiber Uplinks (No Copper)

RS20-0800M2M2TDAUWVV

Uplink: 2×M2 multimode SC fiber ports

Order No.: 943434-385

  1. Single-Mode Fiber (Long Distance)

RS20-0800S2T1TDAUWVV

Uplink: 1×S2 single-mode SC fiber port + 1×T1 copper port

Order No.: 943434-395

  1. Function-Downgraded Replacements in the Same Series (Cost/stock compromise)
  2. Basic Management (SDA)

RS20-0800M2T1SDAUWVV

Software: SDA Basic (no ring/VLAN/IGMP)

Order No.: 943434-364

  1. Standard Temperature (E)

RS20-0800M2T1TDAEWVV

Temperature: 0~60°C (non-wide temperature)

Order No.: 943434-065WVV

  1. Basic Management + Standard Temperature

RS20-0800M2T1SDAEWVV

Order No.: 943434-064WVV

  1. Cross-Series Upgrade Replacements (RS20 discontinued/upgrade)
  2. RS32 Series (with Gigabit, recommended)

RS32-0800M2T1TDAUWVV

8×FE + 2×Gigabit SFP, Layer 2 enhanced, wide temp, hazardous location certified, coated

Compatible with RS20 configuration, dimensions and power supply

  1. MICE/SPIDER Series (compact/unmanaged)

MS20-0800M2T1TDAUWVV (modular)

SPIDER 8TX/1FX M2 TD AU WVV (unmanaged)

  1. Quick Risk Assessment (Critical Items Must Match)

✅ Must match: TDA enhanced, U wide temp, A hazardous location, WVV coating

⚠️ Downgrade risks:

SDA → loss of ring network/VLAN/IGMP

E → not suitable for -40°C environments

No A → prohibited in petrochemical/mining hazardous areas

No WVV → prone to failure in high humidity/corrosive conditions

  1. Final Selection Advice
  2. 1:1 replacement → RS20-0800M2T1TDAUWVV (943434-365)
  3. No explosion protection / high dust → RS20-0800M2T1TDAUHC
  4. Long-distance fiber → RS20-0800S2T1TDAUWVV
  5. Gigabit upgrade → RS32-0800M2T1TDAUWVV

Prev:

Leave a Reply

Leave a message