Контактор,автоматический выключатель,датчик,Кодер,ПЛК,Конвертер
All-stainless-steel double-acting round cylinder, specially designed for food, фармацевтический, влажная и агрессивная среда. Equipped with pneumatic cushioning adjustable at both ends (PPV), it meets the requirements of dynamic load and speed regulation.
- Определение сегмента модели
| Модельный сегмент | Значение | Подробное описание |
| CRDSNU | Stainless steel round cylinder | CR = corrosion-resistant; D = double-acting; S = round type; NU = standard type; full stainless steel structure (barrel / end caps / шток поршня) |
| 40 | Размер отверстия | 40 мм, determines thrust and tension rating |
| 50 | Stroke | 50 мм, maximum travel distance of the piston |
| PPV | Cushioning type | Pneumatic cushioning adjustable at both ends; cushioning intensity adjustable independently on each side |
| А | Piston rod end type | External thread (M12×1.25), standard mounting interface |
- Основные параметры спецификации
| Категория параметра | Технические данные | Примечания |
| Основные характеристики | ||
| Тип действия | Double-acting | Requires air supply on both sides to realize push and pull motion |
| Bore / Stroke | 40 мм / 50 мм | Standard size, suitable for medium and small loads |
| Piston rod specification | M12×1.25 external thread | Standard ISO thread for easy load connection |
| Размер порта | Г1/8 | Air inlet / outlet port, compatible with standard pneumatic components |
| Параметры производительности | ||
| Operating pressure range | 0.1–1.0 MPa (1–10 bar) | Suitable for most pneumatic systems |
| Theoretical thrust @ 6 бар | 754 Н | Calculation formula: F=π×(D/2)2×p |
| Theoretical tension @ 6 бар | 633 Н | Calculated value after deducting piston rod area |
| Cushioning type | PPV (adjustable at both ends) | Cushioning stroke approx. 18 мм, adaptable to different speeds and loads |
| Диапазон температур | −40 °C … +120 °С | Wide temperature design; S6 seal required for extreme high temperature |
| Материал & Согласие | ||
| Main material | High-alloy stainless steel (CRC3) | Corrosion resistance Class 3, excellent anti-corrosion performance |
| Seal material | Standard NBR / optional FKM | FKM suitable for high temperature and chemical environments |
| Lubrication grade | NSF‑H1 food-grade grease | Direct food contact acceptable, compliant with FDA requirements |
| Класс защиты | IP65 | Пыленепроницаемый и водонепроницаемый, подходит для суровых условий |
| Монтаж & Размеры | ||
| Способ монтажа | Any mounting position | Compatible with various mounting accessories (фланец / foot bracket / trunnion, и т. д.) |
| Position detection | Compatible with proximity sensors (СМТ / SME series) | Magnetic switch optional for position feedback |
| Габаритные размеры | Диаметр 40 mm × Total length 180 мм | Компактная структура, экономит место для установки |
| Масса | Приблизительно. 1.2 кг | Stainless steel construction, robust and durable |
- Recommended Accessories List
| Тип аксессуара | Модель | Описание функции |
| Mounting Accessories | ||
| Front flange | FNC‑40 | Front fixed mounting, подходит для узких помещений |
| Rear flange | FNCB‑40 | Rear fixed mounting for easy cylinder disassembly |
| Foot mounting bracket | HNC‑40 | Bottom support mounting with high stability |
| Trunnion mounting | HNZ‑40 | Swing mounting for angular operating conditions |
| Pneumatic Accessories | ||
| One-way flow control valve | VFOE‑3/8‑1/8 | G1/8 port, precise cylinder speed control |
| Push-in fitting | QS‑8‑1/8 | Fast tubing connection, простая установка |
| Глушитель | U‑1/8 | Reduces exhaust noise and environmental noise pollution |
| Detection Accessories | ||
| Magnetic proximity switch | SME‑8‑NS‑24V‑KC | Position sensing, suitable for food-grade environments |
| Sensor mounting bracket | DMS‑40 | Fixes magnetic switch with flexible installation |
| Special Accessories | ||
| High-temperature seal kit | S6 | Adaptable to ambient temperature up to +120 °С |
| Extended piston rod | К8 | Extends effective stroke for special mounting requirements |
- Конкурент & Межбрендовое сравнение
| Бренд | Модель | Соответствующая степень | Основное отличие |
| Вечеринка | CRDSNU-40-50-PPS-A | 100% | PPS = self-adjusting cushioning; PPV = manually adjustable cushioning (эта модель) |
| Вечеринка | DSNU-40-50-PPV-A | 90% | DSNU = carbon steel barrel; CRDSNU = full stainless steel with superior corrosion resistance |
| СМК | CD85N40-50-B | 85% | Stainless steel cylinder, double-acting, adjustable cushioning, R1/8 port |
| Арктика | SI40×50-P | 80% | Stainless steel cylinder, double-acting, elastic cushioning, экономически эффективный |
| Norgren | RM/8020/M/50 | 75% | Stainless steel cylinder, double-acting, self-adjusting cushioning, different mounting structure |
- Рекомендации по выбору & Альтернативные решения
5.1 Три ключевых фактора выбора
Согласование нагрузки: Thrust ≥ Load × 1.5 safety factor; 40 mm bore provides 754 N thrust @ 6 бар, suitable for load ≤ 500 Н.
Stroke confirmation: Reserve ≥10 mm cushioning space for 50 mm stroke to avoid rigid impact.
Environmental adaptation:
Еда / pharmaceutical industry: Must adopt CRDSNU (полностью нержавеющая сталь + NSF‑H1 lubrication).
Высокая температура (>80°С): Equip with S6 high-temperature seal kit.
Chemical corrosion environment: Adopt FKM seals + CRC3 stainless steel.
5.2 Рекомендуемые альтернативные решения
| Сценарий применения | Рекомендуемое решение | Преимущества |
| Standard food-grade environment | ЦРДСНУ-40-50-ППВ-А | Полностью нержавеющая сталь + adjustable cushioning, suitable for dynamic loads |
| Static load working condition | CRDSNU-40-50-PPS-A | Self-adjusting cushioning, не требующий обслуживания, более низкая стоимость |
| Ultra-high temperature (>120°С) | Custom high-temperature cylinder | Special seals and materials for extreme temperature conditions |
| Budget-limited project | Domestic stainless steel cylinder (например. Airtac SI series) | Высокая стоимость исполнения, meets basic functional requirements |
| Clean room environment | ЦРДСНУ-40-50-ППВ-А + A1 wiper ring | Enhanced chemical resistance, meets clean room standards |
5.3 Установка & Рекомендации по техническому обслуживанию
- Clean cylinder ports before installation to prevent impurities from entering and shortening seal service life.
- Cushioning adjustment: Start with minimum cushioning, then gradually increase to proper effect; avoid over-cushioning causing cylinder creeping.
- Pipe length ≤ 5 м, inner diameter ≥ 6 mm to ensure stable air supply.
- Regular inspection every 6 месяцы: Check seal condition, piston rod surface and cushioning performance; replace parts in time if abnormal.
- Rinse with clean water after use in food processing environments to keep the cylinder clean.
CRDSNU-40-50-PPV-A is a full stainless steel round cylinder developed by Festo for harsh working environments. Its core advantages include CRC3 corrosion resistance, PPV adjustable cushioning and NSF‑H1 food-grade lubrication, perfectly applicable to food & напиток, фармацевтический, очистка воды и другие отрасли промышленности. С 40 mm bore, 50 mm stroke and adjustable cushioning at both ends, it flexibly adapts to various load and speed requirements, making it an ideal pneumatic actuator for harsh environments.
