Allen‑Bradley 2080-LC20-20QBB Programmable Logic Controller

Catalog Code Breakdown

Native I/O Allocation (20 Очки)

Входы: 12-point DC24V Digital Inputs

Terminals I-00~I-11, sinking/sourcing compatible (настраиваемый)

Выходы: 8-point DC24V NPN Transistor Outputs

Terminals O-00~O-07, NPN transistor type. AC loads cannot be driven directly.

⚠️ Distinction:

2080-LC20-20QBB = NPN transistor output

2080-LC20-20QBBR = Relay output version

Основные технические характеристики

1. Источник питания: 24 В постоянного тока (operating range:18~30 VDC)
2. Program Memory: 10K instructions
3. Variable Memory: 10K bytes
4. Коммуникационные интерфейсы

USB (programming port)

Embedded RS485 (Modbus RTU Master/Slave)

5. Возможность расширения

✅ Supports Micro800 plug-in modules (analog I/O, RTD/TC, high-speed counter, serial modules)

✅ Maximum 4 plug-in modules can be installed

6. Высокоскоростные функции

4-channel High-Speed Counter (HSC), Макс. 100кГц

4-channel Pulse Train Output (PTO), Макс. 100kHz for basic positioning control

7. Environmental Ratings

Рабочая температура: 0 ~ 55 ℃

Температура хранения: -40 ~ 85 ℃

Класс защиты: IP20, cabinet mounting only

Software Requirement

Программное обеспечение: Connected Components Workbench (CCW)

Минимальная поддерживаемая версия: CCW V8.0 and above

Типичные применения

Small conveying equipment, упаковочные машины, вентилятор & управление насосом, custom automated tooling, контроль вентиляции и кондиционирования, basic stepper/servo positioning systems.

Рекомендации по выбору & Common Pitfalls

1. NPN sinking transistor output: Load negative wire connects to PLC output terminal; AC loads cannot be driven directly. Use DC24V solenoid valves preferentially.
2. No built-in Ethernet port! Ethernet communication requires additional Ethernet plug-in module (например. 2080-EWEB).
3. Freewheeling diodes are recommended for inductive loads to avoid transistor breakdown caused by back EMF.
4. Micro820 does not support remote I/O, only local plug-in expansion available.

Прямые замены & Сравнение серий

Same I/O count relay variant: 2080-LC20-20QBBR

Higher I/O capacity: Upgrade to Micro830 (2080-LC30 series)

Complete Reference for 2080-LC20-20QBB

(Terminal Wiring + Modbus RTU Configuration + PTO Program + Поиск неисправностей + Код ТН ВЭД)

1. Hardware Terminal Definition & Руководство по проводке

Модель: Micro820 2080-LC20-20QBB

Источник питания: 24 В постоянного тока; ОТ:12-channel DC24V; ДЕЛАТЬ:8-channel NPN Sinking Transistor Output

⚠️ Embedded serial port: Shared RS485/RS232 without galvanic isolation

1.1 Силовые терминалы (PLC Main Power)

1.2 Digital Input Terminals (12 ОТ: я-00 ~ I-11)

Общий терминал: CM0

Sinking Wiring (Самый распространенный): CM0 connected to DC24V+; NPN sensor output to I-xx; sensor negative to 0V

Sourcing Wiring: CM0 connected to 0V; PNP sensor output to I-xx; sensor positive to DC24V

я-00, я-01, я-02, я-03: Dedicated high-speed counter channels

DI Terminal List:

я-00, я-01, я-02, я-03, я-04, я-05, я-06, я-07, я-08, я-09, I-10, I-11

1.3 Digital Output Terminals (8 DO O-00 ~ O-07, НПН)

Общий терминал: -CM0

✅ NPN Sinking characteristic: Terminal O-xx approximates 0V when energized

Standard Wiring Scheme:

+DC24V → Load positive terminal; Load negative terminal → O-xx; All -CM0 terminals tied to DC24V 0V

O-00, O-01: PTO pulse output channels (high-speed)

Freewheeling diode must be reverse-paralleled for inductive loads (электромагнитные клапаны)

DO Terminal List: O-00, O-01, O-02, O-03, O-04, O-05, O-06, O-07

1.4 Embedded RS485/RS232 Serial Terminal (6-pin terminal block)

RS485 Wiring: Pin7(Б) ↔ Device B terminal; контакт 8(А) ↔ Device A terminal; Pin6 shared ground

❗ No galvanic isolation on this port. Install isolated repeater for long-distance communication.

2. Step-by-step CCW Modbus RTU Configuration (Master/Slave Supported)

Программное обеспечение: Connected Components Workbench CCW V8.0 and above

Step1: Project Hardware Configuration

1. Create new project → Select controller 2080-LC20-20QBB
2. Double-click [Контроллер] on left pane to open configuration page → Locate [Serial Port]
3. Driver selection: Модбус РТУ

Step2: Communication Parameters (Recommended Defaults)

Step3: Register Mapping (Critical Section)

Modbus address mapping rule for Micro820

Coils (0x addresses): PLC BOOL variables

Discrete Inputs (1x addresses): Read-only BOOL status

Holding Registers (4x addresses): INT/DINT (Read & Write, наиболее широко используемый)

Input Registers (3x addresses): Read-only INT values

Важное примечание: Micro800 series does not support automatic tag mapping for Modbus. Use function blocks for master read/write operations:

`MODBUS_READ` / `MODBUS_WRITE`

3. PTO Pulse Positioning Control (O0/O1 Pulse Output for Stepper/Servo)

Hardware Channel Assignment

PTO0: Pulse Output → O-00; Direction signal recommended on O-02

PTO1: Pulse Output → O-01; Direction signal recommended on O-03

Max output frequency: 100кГц

Output type is NPN sinking. Servo drive pulse input setting must be low-level active / sinking input

CCW Configuration Workflow

1. Controller Configuration → Enable [Импульсный выход (PTO0)]
2. Set maximum frequency: 100000 Гц; Acceleration/Deceleration time: 500РС
3. Call motion function block `PTO_RUN` inside program

Structured Text Example: Relative Positioning

⚠️ Critical Limitation: Micro820 does not support electronic cam or multi-axis synchronization; only basic point-to-point positioning available.

4. High-Speed Counter (HSC) Конфигурация (I0~I3)

4 independent HSC channels, support single-phase input & quadrature encoder with 4x multiplication

Common operation modes:

Mode0: Single-phase up-counting

Mode4: Quadrature encoder, 4x frequency multiplication mode

5. Электропроводка & Selection Hard Rules (Risk Avoidance)
6. 2080-LC20-20QBB = NPN sinking output. AC loads cannot be driven directly. Add intermediate relays for AC loads.
7. Do not overload transistor outputs continuously: 0.3A per point maximum (ambient temperature 55℃)
8. RS485 port non-isolated. Communication errors easily occur under multi-ground power supply systems; implement shared ground or galvanic isolation.
9. No native Ethernet port. Install plug-in module 2080-EWEB if Ethernet connection is required.
10. Maximum 4 plug-in modules supported. Remote I/O expansion is not available.
11. Use shielded cables for pulse wiring; route away from power cables of contactors and inverters to reduce interference.
12. HS Code Reference for Import & Export Customs Declaration

8537101100

Описание: Программируемый логический контроллер (ПЛК)

⚠️ Reference only. Confirm classification with local customs authority before formal customs clearance.

7. Матрица поиска и устранения распространенных неисправностей

8. Official Manual Reference

Руководство пользователя: 2080-UM005E-EN-E (Micro820 Controller User Manual)

Allen‑Bradley 2080-LC20-20QBB (Micro820) Programmable Controller Overview

1. Позиционирование продукта

2080-LC20-20QBB is an Allen‑Bradley Micro820 compact integrated PLC manufactured by Rockwell Automation. Designed for standalone OEM machinery and small complete automation systems. It replaces conventional control circuits built with massive intermediate relays. Equipped with integrated digital & analog I/O and multiple communication ports, DIN rail mountable. Target market: компактный, low-cost standalone automation solutions.

Catalog Summary

2080: Micro800 series identifier

LC20: Micro820 controller platform

20: 20 native I/O points

вопрос: 24V DC sourcing (ПНП) digital output

ББ: Onboard 4 аналоговые входы +1 аналоговый выход, PTO pulse output, embedded Ethernet

2. Native Hardware I/O Specifications
3. Цифровые входы:12-точка DC24V (configurable sinking/sourcing)

Signal acquisition: Photoelectric sensors, proximity switches, концевые выключатели, start/stop pushbuttons, аварийная остановка, door interlock switches

2. Цифровые выходы:7-point DC24V PNP sourcing output

Drive small solenoid valves, indicator lamps, intermediate relays (например. MY2N-GS), contactor coils

3. Integrated Analog Channels (Основное преимущество)

4 аналоговые входы: 0~10 В, 0~20 мА, thermistor temperature acquisition supported

1 аналоговый выход: 0~10 В / 0~20 мА, used for inverter speed regulation and modulating valve control

4. Motion Control Functions

Встроенный 1 channel PTO/PWM pulse output, capable of driving stepper motor controllers for basic point positioning

5. Возможности расширения: 2 plug-in slots for high-speed counters, serial ports and additional I/O modules
6. Основные функции

3.1 Discrete Logic Control (Basic Function)

Based on signals from sensors and operation buttons, execute programmed sequence, блокировка, mutual lock and start-stop logic:

Sequential start/stop of conveyors, automatic cylinder cycling, automatic machine workflows, safety loop judgment and fault alarm output.

Can be paired with MY2N-GS intermediate relays to drive high-power loads indirectly.

3.2 Analog Process Control (Advantage of Onboard Analog Channels)

Collect temperature, давление, liquid level and flow signals from transducers

Built-in PID function: Constant temperature control, constant pressure water supply, air volume regulation; Analog output to adjust inverter speed and proportional valves.

3.3 High-speed Signal Processing

High-speed counters read encoder pulses (скорость & position measurement); PTO pulses implement basic stepper positioning.

3.4 Communication Networking

1. EtherNet/IP Ethernet Port

Connect HMI touchscreens, SCADA host computers and other Rockwell PLCs for remote monitoring, parameter access and program upload/download.

2. RS232/RS485 (Non-isolated Serial Port)

Modbus RTU Master/Slave interface to connect inverters, instruments and third-party sensors.

3. USB Programming Port: Direct connection to PC for program download and online debugging.

3.5 Хранение данных, Recipe & Log Management

Embedded RTC real-time clock: Timed tasks, timestamp for fault logging

MicroSD card slot: Store production recipes, runtime logs, записи неисправностей; support program backup & one-click restore.

3.6 HMI Expansion

Supports external remote text display 2080‑REMLCD, enabling parameter modification and alarm display without additional touchscreen panels.

4. Typical Industries & Оборудование
5. Упаковочное оборудование: Small sealers, этикетировщики, filling machines, miniature sorting conveyor systems
6. ОВК & Очистка воды: Small pump stations, air handling units, constant temperature water tanks, chemical dosing systems
7. Пищевое оборудование & Central Kitchen Equipment: Washing lines, material conveyors, temperature-controlled ovens, smoke exhaust control systems
8. Custom Automation: Assembly tooling, испытательные стенды, small transfer equipment
9. Auxiliary control for machine tools, material conveying lines
10. Laboratory equipment, small constant-temperature aging equipment
11. Программное обеспечение

Программное обеспечение: Connected Components Workbench (CCW)

Supported languages: Лестничная диаграмма (ЛД), Функциональная блок-схема (ФБД), Структурированный текст (СТ), compliant with IEC61131‑3

6. Application Boundaries

✅ Suitable for: Standalone machines with limited I/O, analog acquisition/PID demand, Ethernet networking requirement, cost-sensitive OEM equipment

❌ Not suitable for: Multi-axis servo synchronization, large-scale distributed production lines, massive remote I/O, high safety-level safety circuits (install dedicated safety relays such as G9SX for safety functions)

Supplement Remarks

1. Terminology strictly follows Rockwell Automation official datasheet standards, suitable for export tender documents, equipment manuals and overseas product catalogs;
2. Consistent industrial automation vocabulary matching international engineering conventions;
3. If you need Russian translation or condensed datasheet version, I can process further.