Автоматический выключатель Chint Air Switch NXB63-3P/D32

Chint Air Switch NXB63-3P/D32 is a three-pole miniature автоматический выключатель suitable for industrial and commercial scenarios, mainly used for overload protection, short-circuit protection and circuit isolation. The following is a collation of its core information:

1. Model Parsing and Technical Parameters

Модель Значение:

Издательство-63: Chint NXB series miniature circuit breaker with a frame current of 63A.

3П: Three-pole design, подходит для трехфазных цепей (such as 400V systems).

D32: D-type tripping curve, номинальный ток 32А, suitable for loads with high inrush current (такие как моторы).

Ключевые параметры:

Номинальное напряжение: 400В и (3P specification), frequency 50Hz.

Разрывная способность: 6тот (соответствует МЭК 60898-1 стандартный), capable of quickly cutting off short-circuit current.

Характеристика срабатывания: D-type curve, suitable for equipment with large starting current, такие как моторы, трансформаторы, и т. д..

Сертификация: Сертифицировано CCC, CE, ТУВ, и т. д., but UL certification is not explicitly mentioned, so it may not be applicable to the North American market.

2. Сценарии применения и функции

Применимые поля:

– Overload and short-circuit protection for industrial power distribution systems, commercial buildings and residential three-phase circuits.

– Particularly suitable for motor control circuits, as it can withstand the instantaneous high current during motor startup.

Основные функции:

Защита от перегрузки: When the current exceeds the rated value, биметаллическая полоса нагревается и изгибается, вызывая срабатывание.

Защита от короткого замыкания: The electromagnetic tripping device quickly cuts off the circuit in case of a short circuit (время ответа < 0.1 секунды).

Функция изоляции: After the handle is opened, the circuit can be safely maintained, meeting the requirements of electrical isolation.

3. Замечания по установке и использованию

Способ установки:

– Standard 35mm guide rail installation, supporting DIN EN 60715 стандартный, with simple installation.

– The wiring method is top-in and bottom-out, and it is necessary to ensure that the cross-sectional area of the wire matches the current (например, 32A is recommended to use 6mm² copper wire).

Экологические требования:

– Диапазон рабочих температур: -5от ℃ до +40 ℃, humidity ≤ 95%RH (нет конденсата).

– Избегайте установки в средах с высокой температурой., humidity or corrosive gases.

Рекомендации по техническому обслуживанию:

– Regularly check the flexibility of the handle operation and the state of the contacts to ensure no ablation or oxidation.

– It is recommended to replace the circuit breaker after 10 years or 10,000 operations to ensure reliability.

4. Purchase and Market Applicability

Международный рынок:

– This model has not explicitly obtained UL certification and may not comply with North American electrical standards (such as NEC).

– If American users need to use it, it is recommended to purchase through importers via Whatsapp: 0086-13811255435, but they need to confirm the compatibility and certification issues by themselves.

5. Suggestions for Alternative Solutions

Alternative Models for the North American Market:

– Если требуется сертификация UL, you can consider Chint’s NXB series variants designed for North America (such as NXB-63 3P D32 UL), or international brands such as Siemens 5SJ6 and ABB S203 series.

– Note that the commonly used voltage in North America is 120/240V, while NXB63-3P/D32 is a 400V specification, so direct use may require a transformer for voltage reduction.

6. Risk Tips

Compatibility Risks:

– Installation of non-UL certified products in the United States may violate local electrical regulations, leading to insurance claims rejection or safety hazards.

– Three-phase 400V equipment is incompatible with the North American single-phase 240V system, and a professional electrician is required to evaluate the transformation plan.