Schneider iC65N 2P 32A Miniature Circuit Breaker

Стандартное обозначение: iC65N 2P C32A (commonly abbreviated as IC65N-2P32A in the market; C-curve by default)

Material codes: A9F18232 (C-кривая); A9F17232 (B-curve); A9F19232 (D-кривая)

✅ Определение модели

iC65: Серия Акти9 миниатюрный автоматический выключатель

Н: Breaking capacity class 6kA (iC65H=10kA, iC65L=15kA)

2П: 2-столб, simultaneous disconnection of phase and neutral for protection

32А: Rated current In=32A

C-кривая (наиболее распространенный): Magnetic trip 5~10In, подходит для освещения, socket outlets and general power loads; B-curve 3~5In (low-voltage circuits); D-curve 10~20In (моторы, transformers with inrush current)

📋 Основные электрические характеристики

Rated voltage Ue: AC 230/400V, 50/60Гц

Rated short-circuit breaking capacity Icn: 6kA @400V AC (GB10963.1 / IEC60898-1)

Защита: Термомагнитный трип (перегрузка + short-circuit dual protection), disconnector function

Монтаж: DIN35mm rail, width 36mm (2 модули)

Insulation voltage Ui: 500В; Импульсное выдерживаемое напряжение Uimp: 6кВ

Current limiting class: Сорт 3

Terminal protection IP20, IP40 when installed inside enclosure; CCC, Сертификация CE

Электропроводка: Сверху внутрь снизу наружу / bottom-in top-out both acceptable

📌 Типичные применения

Main incoming breaker for residential buildings, single-phase distribution circuits in shops

Освещение, схемы розеток, ordinary fans and water pumps (C-кривая)

Can be assembled with Vigi iC65 residual current add-on block to form RCBO

🔄 Replacement Information

Predecessor model: C65N 2P32A (прекращено)

Шнайдер equivalent upgrade: iC60N 2P C32A (A9F74232)

Внутренний эквивалент: Chint NXB-63 2P C32A, Delixi DZ47s 2P C32A

⚙️ Optional Accessories (compatible within series)

Vigi iC65 RCD add-on block (30mA Type A)

iMX shunt trip release, iMN undervoltage release, iOF auxiliary contact, iSD fault alarm contact

Differences between iC65N series and iC60N series

iC65N: China domestic version (CCC); iC60N: International general version (CE/IEC). Same outline, module width and basic tripping characteristic; 6kA breaking capacity per IEC60898. Directly interchangeable on DIN rail. But they differ in certification, applicable standards, contact status indication, available trip curves, accessory system and material codes.

1. Рыночное позиционирование & Сертификация

iC65N: Model dedicated for Chinese market, сертифицирован CCC, standard GB10963.1 (identical to IEC60898-1). No separate CE for overseas acceptance, not recognized for export projects.

Material prefix: A9F18xxxx (C-кривая). Пример: 2P C32A = A9F18232

iC60N: Global Acti9 international version, CE+IEC certified, compliant with IEC60898-1 (household distribution) + МЭК60947-2 (industrial disconnector). Preferred for export panels, overseas complete sets and foreign-invested projects.

Material prefix: A9F74xxxx (C-кривая). Пример: 2P C32A = A9F74232

2. Разрывная способность (Ключевое отличие)

iC65N N grade: 6kA @400V (IEC60898 only)

iC60N N grade: 6тот (IEC60898) / 10тот (IEC60947 industrial condition), higher breaking capacity under industrial standard

3. Available Trip Curves

iC65N: Б / С / Д

iC60N: Б / С / Д / К / З / МА (K for transformers, Z for electronic circuits, MA fixed magnetic trip for motors; wider selection for industrial control)

4. Front Panel Indication (VisiSafe / VisiTrip)

iC65N: Simplified China version. Green handle = open position; red marker for fault trip

iC60N: Full VisiSafe (visible true contact separation) + VisiTrip (independent red window for fault trip). Widely required by overseas safety specifications and site verification

5. Совместимость аксессуаров

Accessories look identical but have separate material code ranges. Strongly recommended to match accessories within the same series

iC65: iOF / iSD / iMX / iMN, Vigi iC65 RCD add-ons (China A9 domestic accessories)

iC60: Виги iC60, overseas auxiliary / маршрутка; compatible with PowerTag smart energy monitoring modules (iC65 generally not fitted with overseas smart modules)

6. Измерение & Взаимозаменяемость

✅ Same module size: 1P=18mm, 2P=36mm, direct DIN35 rail swap, wiring from top or bottom allowed

⚠️ Important risk note: iC65N preferred for domestic cabinets in China; for export, foreign-owned projects or CE certificate requirement, select iC60N. iC65N cannot be substituted, overseas inspectors do not accept iC65N certificates.

7. Сравнительная таблица выбора

8. Reference for your model 2P32A

iC65N 2P C32A: A9F18232 (regular stock for China domestic)

iC60N 2P C32A: A9F74232 (for export / foreign invested projects)

1. Prefix Coding Rule

1) iC65N (China CCC version)

B-curve: A9F17xxxx

C-кривая: A9F18xxxx (мейнстрим)

D-кривая: A9F19xxxx

5th digit = pole count: 1=1П; 2=2P; 3=3P; 4=4P

Last two digits = rated current: 01=1A, 02=2A…32=32A, 63=63А

2) iC60N (International CE version)

B-curve: A9F73xxxx

C-кривая: A9F74xxxx (mainstream for export)

D-кривая: A9F75xxxx

поляк & current coding rule identical to iC65N, one-to-one mechanical interchange

1. iC65N Full Model & Material Code List (Б/К/Д, 1П/2П/3П/4П, 1~63А)

(1) 1P Single Pole

(2) 2P Two Pole (your 2P32A here)

(3) 3P Three Pole

(4) 4P Four Pole

III. iC60N Full Model & Material Code List (Б/К/Д,1П/2П/3П/4П,1~63А)

Coding Reference

B-curve: A9F73xxx

C-кривая: A9F74xxx (mainstream for export)

D-кривая: A9F75xxx

(1) 1П

(2) 2П (match your 2P32A)

(3) 3П

(4) 4П

1. Direct Replacement for your 2P32A
2. Domestic China project requiring CCC: iC65N 2P C32A → A9F18232
3. Экспорт / foreign-invested project requiring CE: iC60N 2P C32A → A9F74232
4. Matching RCD Add-on Blocks (DO NOT cross-series mix)

For iC65N: Vigi iC65 residual current add-on (A9V52xxx)

For iC60N: Vigi iC60 residual current add-on (A9V53xxx)