CHINT УЗО NBHLE-40Y-1PC32

CHINT NBHLE-40Y-1PC32 is a 1P+N two-pole выключатель остаточного тока (УЗО) specially designed for household and small-to-medium engineering applications. Он объединяет перегрузку, короткое замыкание, and leakage protection functions, suitable for AC 50Hz/60Hz circuits with a rated voltage of 230V. Below is its core information and application guidelines:

1. Основные технические параметры
2. Номинальный ток и характеристики отключения

Номинальный ток: 32А, подходит для обычных нагрузок, таких как освещение, розетки, and small air conditioners, supporting up to approximately 7kW single-phase devices (например, instantaneous water heaters).

Default Type C trip characteristic (instantaneous trip at 5-10 раз номинальный ток), ideal for resistive loads (например, лампы, электрические обогреватели); for inductive loads like motors, Тип Д (instantaneous trip at 10-14 раз) is available.

2. Leakage Protection and Breaking Capacity

30mA leakage action current, rapidly cutting off faulty circuits within 0.1 секунды, соответствует МЭК 61009-1 и ГБ/Т 16917.1 standards to prevent electric shock and fire risks.

Отключающая способность: 6тот, capable of handling common household short-circuit currents (typically 2-4kA) to ensure safe power disconnection.

3. Electrical Performance and Certifications

– Номинальное напряжение: 230В, operating temperature range: -5°С до +70°С, IP20 protection grade, устойчив к влаге и пыли.

– Certified by CCC and compliant with CE standards, обеспечение надежного качества.

1. Типичные сценарии применения
2. Household Power Distribution Systems

Branch Circuit Protection: Socket circuits in humid areas like kitchens and bathrooms to prevent safety accidents from leakage. Например, электрические водонагреватели (3-8кВт) can directly use a 32A circuit breaker with 30mA leakage protection for dual-layer safety.

Whole-House Leakage Protection: If the distribution box lacks a main RCCB, NBHLE-40Y-1PC32 can serve as the main switch to monitor leakage across all circuits.

2. Commercial and Light Industrial Use

Small Office Equipment: Centralized power supply circuits for printers, проекторы, диспенсеры для воды, и т. д., to avoid overload and leakage risks.

Store Lighting Systems: LED strips and display cabinet circuits in clothing stores, cafes, и т. д., providing stable protection.

3. New Energy Equipment Adaptation

AC Charging Pile Protection: Зарядная батарея мощностью 7 кВт. (32А) can directly use this circuit breaker as the main switch, paired with NXB series circuit breakers for hierarchical control.

PV Inverter Branch: Protection for the AC side of small household PV systems to prevent damage from backflow current.

III. Рекомендации по установке и выбору

1. Характеристики установки

Монтаж на рельсе: Compatible with TH35-7.5mm standard rails, wiring terminals support 2.5-10mm² conductors, and vertical installation is required for optimal heat dissipation.

Экологические требования: Избегайте установки при высокой температуре (>70°С), high-humidity, or flammable environments; distribution boxes must have reserved heat dissipation space (≥30 см от стены).

2. Логика выбора

Согласование нагрузки: Equipment total power (Вт) ÷ напряжение (230В) = текущий (А). Номинальный ток автоматического выключателя должен быть в ≥1,2 раза больше расчетного значения.. Например, a 6kW load corresponds to 26.1A, making a 32A circuit breaker compliant.

Leakage Protection Hierarchy: If the main switch already has an RCCB, use ordinary circuit breakers (например, NXB63-2P/32A) for branches; if not, prioritize NBHLE series for whole-house protection.

3. Расширение аксессуаров

Вспомогательные функции: Can be paired with AX-X1 auxiliary contacts (indicate on/off status), AL-X1 alarm contacts (trigger signals during faults), or shunt trip coils (remote tripping control).

Совместимость системы: Compatible with NXB series circuit breakers, rail sockets, and surge protectors (например, NXU) to build modular power distribution systems.

1. Maintenance and Safety Tips
2. Регулярные проверки

Monthly Testing: Press the test button (ТЕСТ) to verify the leakage protection function. Replace immediately if it fails to trip.

Annual Check: Use an infrared thermometer to detect contact temperatures (≤60°С) и предотвратить увеличение контактного сопротивления из-за окисления.

2. Устранение неполадок

Частые отключения: If overload or short circuit is ruled out, aging insulation may be the cause, requiring professional electrical inspection.

Leakage Indicator Protrusion: Indicates a past leakage fault; identify and fix the cause before resetting.

1. Ценообразование и каналы закупок

Рыночная цена: Reference price per unit is approximately 150-200 китайский юань (subject to local dealers).

Purchase Advice: Procure through CHINT’s official channels (например, Tmall flagship store, authorized dealers) для обеспечения качества продукции и послепродажного обслуживания.

1. Typical Configuration Schemes

Высокая надежность и гибкая адаптируемость, CHINT NBHLE-40Y-1PC32 is the ideal choice for leakage protection in household and small-to-medium engineering projects. Users can select trip characteristics based on load types and strictly follow installation guidelines to ensure electrical safety.