OMRON S8VK-T12024 DIN Rail Power Supply

S8VK: ОМРОН S8VK series switching источник питания

Т: Model for three-phase AC400V input

120: Rated power 120W

24: DC24V output

Основные характеристики

Определение терминала

1. Л1, Л2, Л3: Three-phase AC input
2. ЧП: Защитная земля
3. +В, -В: DC24V output
4. V.ADJ: Output voltage trim potentiometer
5. DC ON: Green indicator for normal output

Типичные сценарии применения

Three-phase industrial control cabinets, станки, упаковочное оборудование, HVAC automatic control, 380V powered automated production lines, supplying DC24V for PLCs, датчики, relays and valve islands.

Последовательное сравнение

S8VK-T12024: 120Вт / 5А / Width 40mm

S8VK-T24024: 240W /10A / Width 60mm

S8VK-T48024: 480W /20A / Width 95mm

S8VK-T96024: 960W /40A

Справочник по альтернативному выбору

1. OMRON single-phase version: S8VK-C12024 (also 120W/24V, single-phase 220V input, не путай)
2. Отечественные альтернативы: Meanwell DRT-120-24, Delta DRP0120, Phoenix Contact three-phase 24V/5A rail power supply

Рекомендации по устранению неполадок

1. DC indicator off: Check three-phase input voltage, PE earthing, input circuit breaker; failure to start if two phases are missing
2. Voltage drop under load: Load exceeds rated 5A; снижение номинальных характеристик при высоких температурах; low input voltage
3. Intermittent undervoltage alarm: Main circuit voltage fluctuation, loose terminal wiring
4. Overvoltage latch-off: Triggered by output overvoltage, restore by power cycling; check for load short circuit / обратное напряжение

OMRON S8VK-T12024 Detailed Technical Specifications

Three-phase 380V input DIN rail switching power supply, rated 120W DC24V/5A

1. Input Specifications

2. Output Specifications

3. Изоляция & Выдерживать напряжение
4. Input ↔ Output: AC3000V, 1мин, cut-off current 20mA
5. Input ↔ PE: AC2500V, 1мин, cut-off current 20mA
6. Output ↔ PE: AC1000В, 1мин, cut-off current 30mA
7. Сопротивление изоляции: ≥100 МОм (500 В постоянного тока, between input/output/PE)
8. Условия окружающей среды

5. Механические характеристики

Монтаж: DIN35mm rail mounting

Размеры: H125 × W40 × D112.2 mm

Терминалы: Screw-type terminals

Масса: Приблизительно. 600г

Необязательный: Conformal coated PCB version (anti-corrosion & пыленепроницаемый)

6. Надежность & Сертификаты

среднее время безотказной работы: ≥135,000 hours

Индикатор: Green DC ON lamp, illuminates when output ≥80~90% rated voltage

Сертификаты безопасности: UL, CSA, CE and other global industrial standards

7. Определение терминала
8. Л1, Л2, Л3: Three-phase AC input
9. ЧП: Защитная земля (must be earthed reliably)
10. +В, -В: DC24V output
11. V.ADJ: Output voltage trim potentiometer
12. Summary of Protection Functions

✅ Overload protection (автоматическое восстановление)

✅ Short-circuit protection (автоматическое восстановление)

✅ Output overvoltage protection (latch-off, reset by power cycle)

✅ Built-in undervoltage monitoring

✅ Input surge suppression

9. Критические замечания
10. Derating is mandatory when ambient temperature＞50℃
11. Load capacity will be limited under two-phase input
12. External diodes are mandatory for series connection; direct series connection is prohibited
13. PE terminal must be reliably earthed to comply with safety standards

OMRON S8VK-T Three-phase DIN Rail Power Supply Full Series List

S8VK-T: Three-phase AC380~480V input, DC24V output, Монтаж на рейку DIN35, fanless natural cooling; суффикс -400 = conformal coated PCB (for dust, moisture and corrosive environments)

Стандартные модели

Conformal Coated (Anti-corrosion) Модели

Список аксессуаров

Common Specifications for Entire S8VK-T Series

1. Вход: Three-phase AC380～480V; operating range AC320～576V; two-phase input supported; DC450~810V DC input
2. Выход: 24 В постоянного тока, adjustable range 24V±10% (V.ADJ potentiometer)
3. Защита: Перегрузка / короткое замыкание (автоматическое восстановление), output overvoltage latch-off (reset by power cycle), built-in undervoltage monitoring
4. Среда: Operating temperature -40℃ ~ +70℃, derating required above 50℃; fanless natural cooling; IP20 cabinet use
5. Выдерживать напряжение: Input↔Output AC3000V 1min; Input↔PE AC2500V 1min; Output↔PE AC1000V 1min
6. Монтаж: DIN35 рейка, винтовые клеммы; multiple units parallelable for capacity expansion; Макс. 2 units in series (external diode required)

Советы по быстрому выбору

All models are single DC24V output. S8VK-T series has no other voltage options (12V/48V not available in T series)

Model without -400: Standard PCB for normal control cabinets; with `-400`: Coated board for dusty, humid and corrosive gas environments

S8VK-T is three-phase power supply, do not confuse with single-phase S8VK-C / S8VK-G

Redundant power supply requires separate S8VK-R redundancy module

OMRON S8VK-T Three-phase DIN Rail Power Supply Cross-Brand Model Comparison Table

Matching prerequisites: Three-phase AC380~480V input, DC24V output, DIN35 rail mount, fanless natural cooling. Grouped into【Premium International Brands】【Taiwan Brands】【Domestic Industrial Brands】; replacement rating marked. ⚠️Differences exist in dimension, расположение терминала, BOOST capability and PCB coating. Drawings must be verified for direct replacement.

Conformal Coated Version (-400 Anti-corrosion) Перекрестная ссылка

S8VK-Txxx24-400 (PCB conformal coating for dusty/humid/corrosive environments)

1. Феникс Контакт: QUINT4 series Coated version (coating option via suffix)
2. Meanwell TDR: Custom conformal coating available (standard TDR uncoated, custom order required)
3. Сименс: SITOP PSU coated version
4. Одомашненный: RDW series with three-proof coating

Redundancy Module Cross Reference (S8VK-R10 / S8VK-R20)

Key Difference Notes (Selection Focus)

1. BOOST Peak Capacity

S8VK-T fixed 120% Power Boost for all models; Phoenix QUINT4 has stronger dynamic BOOST for short-time peak loads; Meanwell TDR uses conventional constant current limiting.

2. Входные характеристики

OMRON S8VK-T supports two-phase input. Some competitors’ three-phase power supplies do not support two-phase single-side power supply, verify carefully for retrofit projects.

3. Измерение & Установка

OMRON S8VK-T is compact narrow-width design; Phoenix TRIO and Siemens SITOP models of same power are generally wider. DIN rail mounting space is the most common bottleneck for direct replacement.

4. Protection Logic Difference

S8VK-T overvoltage protection is output latch-off, reset by power cycle. Some competitors adopt hiccup auto-recovery, which may affect control system logic.

5. Температурный диапазон

OMRON S8VK-T features -40℃ cold start advantage; some Taiwan and domestic brands have lower limit of -30℃, use caution for cold-region equipment.

Selection Recommendation Strategy

Экспортное оборудование, высокая надежность, cold environment: Prefer Phoenix QUINT4 / Siemens SITOP

Приоритет затрат, ordinary domestic automation equipment: Meanwell TDR series

Budget control for domestic projects: Domestic RDW three-phase DIN rail power supply