Феникс Контакт 2940391 Модуль электромагнитного реле - Контактор,автоматический выключатель,датчик,Кодер,ПЛК,Конвертер

Вичат: +86-13184948252 WhatsApp: 0086-13811255435 Электронная почта: kent@bestcontactor.com

О Контакт |

Феникс Контакт 2940391 Модуль электромагнитного реле - Контактор,автоматический выключатель,датчик,Кодер,ПЛК,Конвертер

ПЛК/

Феникс Контакт 2940391 Модуль электромагнитного реле

Полная модель: EMG 17-REL/KSR-24/21-21-LC ✅ Basic Information Part No.: 2940391 Тип продукта: DIN-rail mounted electromagnetic relay module (built-in miniature relay soldered, relay core non-removable) Ряд: EMG 17-REL Origin: Germany HS Code: 85364190 Связь: Screw terminal M3 Dimensions: 17.5(Вт) ×75(ЧАС) ×62.5(Д) mm Packaging: 10 pcs per box, minimum order 1 pc ⚙️ Core Electrical Parameters Coil ...

  • Подробная информация о продукте

Полная модель: EMG 17-REL/KSR-24/21-21-LC

✅ Основная информация

Номер детали.: 2940391

Тип продукта: DIN-rail mounted electromagnetic relay module (built-in miniature relay soldered, relay core non-removable)

Ряд: EMG 17-REL

Источник: Германия

Код ТН ВЭД: 85364190

Связь: Screw terminal M3

Размеры: 17.5(Вт) ×75(ЧАС) ×62.5(Д) мм

Упаковка: 10 pcs per box, minimum order 1 ПК

⚙️ Core Electrical Parameters

Поставка катушек: 24V AC/DC universal, typical current 18mA, power consumption 0.43W

Конфигурация контактов: 2 changeover contacts DPDT (2С)

Контактный материал: AgNi silver nickel, suitable for medium-load applications

Rated Continuous Current: 5А; maximum inrush switching current 6A

Максимальное коммутируемое напряжение: 250В переменного/постоянного тока

Механическая жизнь: приблизительно. 5×10⁷ операций

Рабочая температура: -20℃ ~ +40 ℃; Температура хранения: -20℃ ~ +70 ℃

Изоляция: Basic isolation between input and output, with status LED and surge suppression circuit

Wiring Cross-section: 0.2–4mm² solid wire / 0.2–2.5mm² flexible wire

📌 Определение терминала

А1/А2: Питание катушки (24В переменного/постоянного тока)

11, 12, 14: 1перекидной контакт

21, 22, 24: 2и переключающий контакт

📋 Сценарии применения

PLC/controller signal isolation, low-side control of high-power loads, электромагнитные клапаны, contactors and indicator light circuits.

Особенность: Integrated soldered construction, relay core cannot be replaced separately; interchangeable pluggable models belong to the RIF series.

🔁 Alternative Reference (Compatible Equivalents)

Альтернатива той же марки: RIF-1-RSC-24DC/2X21 (pluggable relay core, более простое обслуживание, same width 17.5mm)

Отечественная альтернатива: 17.5mm width relay module, 24В переменного/постоянного тока, 2 переключающие контакты, screw terminal type

📎 Сертификаты

cULus, ЕАС, CE; соответствует EN 61810-1, EN50178

Полный список Феникс Контакт EMG-REL Relay Modules

Примечание: EMG-REL includes 3 sub-width series: EMG10-REL (10мм), EMG17-REL (17.5мм, мейнстрим), EMG22-REL (22.5мм). All adopt soldered built-in relays (non-removable relay core), screw terminals and DIN rail mounting.

KSR = standard monostable electromagnetic relay; SG = latching relay; G = DC-only coil; W = AC-only coil; LC = LED indicator + surge suppression circuit

  1. EMG 17-REL / 17.5мм (Самый распространенный, включая 2940391)
Номер детали.Полная модельНапряжение катушкиContact SpecПримечания
2940391EMG 17‑REL/KSR‑24/21‑21‑LC24В переменного/постоянного тока2 переключение (2С)✅ Item you enquired, AgNi, со светодиодом & suppression circuit
2940430EMG 17‑REL/KSR‑W230/21‑21‑LC230В и2 переключение (2С)AC-only version, dual contacts
2953854EMG 17‑REL/KSR‑24/2124В переменного/постоянного тока1 переключение (1С)Single changeover, simplified version without LC
2947420EMG 17‑REL/KSR‑12/2112В переменного/постоянного тока1 переключение (1С)12V universal model
2947653EMG 17‑REL/KSR‑230/21230В переменного/постоянного тока1 переключение (1С)230V universal, dual A2 terminal
2946353EMG 17‑REL/KSR‑230/21/SO54230В переменного/постоянного тока1 переключение (1С)SO54 special contact configuration, reinforced insulation
2949994EMG 17‑REL/KSR‑G24/SO38 BK24В Вашингтоне1 нормально открытый (НЕТ)Черный корпус, AgSnO₂, 80A inrush withstand, dedicated for lamp loads
2946654EMG 17‑REL/SG‑B48/21/P48В Вашингтоне1 переключение (1С)SG latching relay, with forward diode circuit
  1. EMG 10-REL / 10mm Narrow Version (Cabinet Space Saving)
Номер детали.Полная модельНапряжение катушкиContact SpecПримечания
2942108EMG 10‑REL/KSR‑G24/1‑LC24В Вашингтоне1 нормально открытый (НЕТ)Со светодиодом, AgNi for standard loads
2941400EMG 10‑REL/KSR‑G60/1‑LC AU60В Вашингтоне1 нормально открытый (НЕТ)AU gold-plated contacts, for low-current weak signals
  1. EMG 22-REL / 22.5mm Wide Version (High Isolation / Built-in Transistor Drive)
Номер детали.Полная модельНапряжение катушкиContact SpecПримечания
2951885EMG 22‑REL/KSR‑24/2124В переменного/постоянного тока1 переключение (1С)High isolation, 5kV dielectric strength, общего назначения
2952350EMG 22‑REL/KSR‑G24/TRN3524В Вашингтоне1 переключение (1С)Built-in NPN transistor, direct drive by low-current PLC outputs, hybrid relay
  1. Suffix Explanation for Model Selection

KSR: Standard monostable electromagnetic relay

SG: Latching relay (remains state after power loss)

Г: DC-only coil

Вт: AC-only coil

ЛК: Integrated LED status indicator + coil surge suppression circuit (безынерционный диод / варистор)

/21: 1 переключающий контакт (1С: 11/12/14)

/21-21: 2 переключающие контакты (2С: 11-12-14 & 21-22-24)

SO38 / SO54: Special contact material (AgSnO₂, suitable for lamp loads and high inrush current)

Австралия: Gold-plated contacts, weak signal and low-level circuits

TRN35: Built-in NPN pre-drive transistor

  1. Ключевое отличие (Avoid Confusion with RIF Series)

EMG-REL: Relay soldered to base, non-replaceable relay core, cost-effective for fixed installation

RIF-REL / RIF-1: Plug-in replaceable relay core, separate base and relay, более простое обслуживание, same width for replacement

Application Fields of Phoenix Contact EMG-REL Relay Modules

Позиционирование: Isolation relay for PLC / controller digital interfaces. Soldered integrated DIN-rail modules. Основные функции: low-voltage signal isolation, signal amplification, level conversion, driving contactors, valves and indicator loads. Special variants (AU gold-plated, SO38 high-inrush, SG latching, TRN built-in transistor) for differentiated working conditions.

  1. Общая промышленная автоматизация (Самый распространенный, включая 2940391)

Станки, упаковочное оборудование, конвейерные линии, машины для литья под давлением, woodworking machinery and custom automation control cabinets

Isolation for PLC DO channels: PLC 24V DC outputs driving contactors, электромагнитные клапаны, indicator lights and sound-light alarms

Door interlock, обратная связь о статусе, fault alarm circuits, auxiliary start-stop control

Преимущество: LC versions with LED and suppression circuit suppress reverse EMF and protect PLC modules

  1. Автоматизация зданий / ОВК

Air handling units, fresh air systems, фанкойлы, air dampers and water valve actuator control

Цепи освещения, вытяжные вентиляторы, водяные насосы, BA system signal interfaces

230V AC coil variants directly work with mains circuits; narrow EMG10-REL saves cabinet space

  1. Очистка воды & Municipal Water Supply / Дренаж

Clean water tanks, sewage pump stations, системы дозирования химикатов, bar screens, valve actuation and liquid level alarm signal isolation

Stable screw wiring suitable for long continuous operation in humid cabinet environments

  1. Возобновляемая энергия (PV, Хранение энергии, Энергия ветра)

Inverter cabinets, combiner boxes, auxiliary control for box-type transformers, fault alarm and status dry contact upload

Signal isolation to prevent strong electrical interference to acquisition boards; for onshore power stations (No ATEX certification, RIF explosion-proof series for hazardous areas)

  1. Логистическая сортировка & Автоматизация склада

Sorters, роликовые конвейеры, штабелеры, AGV control cabinets, high-frequency switching signals, brake control and solenoid valves for sorting chutes

High mechanical life (up to 5×10⁷ operations) for frequent switching cycles

  1. Инфраструктура: Tunnel & Road Lighting, Насосные станции

Управление освещением (SO38 models with AgSnO₂ contacts withstand high inrush current from incandescent and LED lamps, up to 80A inrush)

Remote start-stop control of fans and drainage pumps

  1. Испытательное оборудование, Инструментарий & Медицинское оборудование

AU gold-plated variants: Low contact resistance for mA-level weak signal switching, sensor signal switching and test fixtures; not suitable for high-power loads, gold layer may be damaged by arcing

  1. Другие приложения

Control cabinet signal transfer, relay logic expansion, remote IO isolation, auxiliary dry contacts for fire alarm linkage

SG latching variants: retain switching state after power loss for state memory applications

✅ Selection Guide by Suffix

KSR standard type: General solenoid valves, контакторы, индикаторные лампы (90% common applications, например. 2940391)

SO38 BK: Lamp loads, capacitive loads, высокий пусковой ток

AU gold-plated: Weak signal, instrument and low-current test circuits

SG latching: State retention after power failure

TRN35 built-in transistor: Direct drive by low-current PLC outputs without external pre-resistor

⚠️ Not Suitable Applications

EMG-REL complies with Class A EMC standards, not designed for consumer electronics. It does not have forcibly guided contacts, cannot be used for PLd / PLe safety circuits (safety relays with forcibly guided contacts required). No ATEX certification, not permitted in explosive hazardous areas.

Working Principle of Phoenix Contact EMG-REL Relay Modules

EMG-REL is an integrated electromagnetic relay module. База, электромагнитное реле, LED indicator and suppression components are assembled in one DIN-rail housing. The relay core is permanently soldered and non-pluggable. Fundamentally, it is an electromechanical contact relay for low-voltage control of high-voltage circuits, electrical isolation and signal conversion.

  1. Основной электромагнитный принцип
  2. Coil Side (Control Terminals A1/A2)

When rated coil voltage (24 В постоянного тока / 24 В переменного тока / AC230V etc.) is applied to A1 and A2, excitation current flows through the coil and generates magnetic flux on the iron core. The magnetic force overcomes spring tension and pulls the armature.

Coil energized → Armature pulls in → Contacts switch

Coil de-energized → Magnetic field disappears → Spring resets → Contacts return to original position

AC/DC universal coil versions (такой как 2940391) have coil windings designed for both AC and DC supply. Pure DC (suffix G) and pure AC (suffix W) variants use different winding parameters.

  1. Contact Side (Load Terminals 11/12/14, 21/22/24)

Changeover contacts (1С / 2С) include normally closed (Северная Каролина) и нормально открытый (НЕТ):

Обесточенное состояние: Общий терминал (11) connects to NC (12) and disconnects from NO (14)

Катушка под напряжением: Общий терминал (11) disconnects from NC (12) and connects to NO (14) to activate the external load (электромагнитные клапаны, катушки контактора, indicator lights etc.)

  1. Principle of Built-in Auxiliary Components (LC suffix, 2940391 is LC version)

LC = LED indicator + coil surge suppression circuit

Светодиодный индикатор состояния: Wired parallel to the coil. Lights up when coil is powered to visually indicate drive signal presence. Integrated current-limiting resistor matched to rated voltage.

Surge suppression circuit (безынерционный диод / варистор):

Relay coils are inductive loads and produce high reverse EMF upon de-energization, which may damage PLC output chips.

DC coils: Usually use freewheeling diodes to dissipate inductive energy

катушки переменного тока: Use varistor or RC snubber circuits to suppress AC voltage spikes

Models without LC suffix have no indicator or suppression; external surge protection must be added.

  1. Differentiated Principle of Special Sub-models
  2. SG Latching Version (EMG…SG)

Not conventional monostable relays. Permanent magnet inside:

Forward pulse power → Contacts close and stay latched after power removal

Reverse pulse power → Contacts reset and stay open after power removal

No continuous power required to maintain state, only pulse signal for switching, низкое энергопотребление.

  1. TRN35 Built-in Transistor Version (EMG…TRN35)

NPN pre-drive transistor integrated before coil: Low-current PLC signal drives the transistor first, then the transistor energizes the relay coil. Suitable for PLC channels with weak drive capacity.

  1. AU Gold-plated Contact Version

Gold plating on contact surface reduces contact resistance for mA-level weak signal switching. Not for heavy loads; gold plating is vulnerable to arc damage under high current.

  1. SO38 (AgSnO₂ Contacts)

Tin oxide silver contact material, arc-resistant and withstands high inrush surges, dedicated for lamp and capacitive loads to prevent contact welding.

  1. Electrical Isolation Logic

Basic insulation separates the coil control circuit and load contact circuit. It isolates PLC low-voltage side from high-voltage load side, blocks common-mode interference and prevents load-side faults from propagating into controller IO boards.

⚠️ Важно: This is only functional isolation. It is not a safety relay with forcibly guided contacts and cannot be used for PLe / PLd safety circuits.

  1. Simplified Working Flow (2940391, EMG17-REL/KSR-24/21-21-LC)

PLC digital output → 24V AC/DC supplied to A1/A2 → LED on, coil energized → Magnetic field pulls armature → Two changeover contacts switch synchronously → Solenoid valve / contactor energized

PLC output off → Coil de-energized → Suppression circuit dissipates residual coil energy → Spring resets contacts → Load de-energized

Предыдущий:

Следующий:

Оставить ответ

Оставить сообщение