Shinkawa VM-5Z1 Power Supply Unit for Turbine TSI System - Контактор,автоматический выключатель,датчик,Кодер,ПЛК,Конвертер

Вичат: +86-13184948252 WhatsApp: 0086-13811255435 Электронная почта: kent@bestcontactor.com

О Контакт |

Shinkawa VM-5Z1 Power Supply Unit for Turbine TSI System - Контактор,автоматический выключатель,датчик,Кодер,ПЛК,Конвертер

ПЛК/

Shinkawa VM-5Z1 Power Supply Unit for Turbine TSI System

Модель: VM-5Z1 Power Supply Unit Application: Central power supply for all VM-5 monitor cards (вибрация, shaft displacement, скорость, eccentricity etc.) in the same rack, designed per API 670 стандартный, widely used in thermal power & petrochemical turbine units. Model Definition VM-5: Shinkawa VM-5 TSI monitoring series Z: Блок питания 1: Версия (wide AC/DC input, ...

  • Подробная информация о продукте

Модель: VM-5Z1 Power Supply Unit

Приложение: Central источник питания for all VM-5 monitor cards (вибрация, shaft displacement, скорость, eccentricity etc.) in the same rack, designed per API 670 стандартный, widely used in thermal power & petrochemical turbine units.

  1. Определение модели

VM-5: Shinkawa VM-5 TSI monitoring series

З: Блок питания

1: Версия (wide AC/DC input, different from VM-5Z2 / VM-5Z3)

Suffix `/TRP`: Tropical anti-humidity treatment option

  1. Основные электрические характеристики

Входная мощность (CE compliant): 85~264VAC / 88~144VDC

Multi-way DC output: +5В, +17В, +24В, -15В, -30В (green Power OK LED on front panel)

Макс. потребляемая мощность: ≤265VA

Alarm relay: C-form dry contact, normally energized; рейтинг контактов: 250VAC 5A / 30VDC 5A

Контактная жизнь: ≥100,000 operations at rated load

Выдерживаемое напряжение: 2000ВАК, 1min between power and ground

Сопротивление изоляции: ≥100MΩ at 500VDC

Рабочая температура: 0 ~ 65℃; температура хранения: -30 ~ +85℃

Влажность: 20~95% относительной влажности, неконденсирующийся

Масса: Макс 2.2 кг

Строительство: Sealed plastic housing with aluminum front panel (Munsell N-1.0 grey)

  1. Монтаж & Совместимость

Compatible racks: VM-5H4 (10-слот), VM-5W2 (8-слот); занимает 2 module slots

Функция: OK indicator turns off + relay contact trips upon power failure, sending fault signal to DCS/PLC

Comparison with other power modules

VM-5Z1: Wide AC/DC input, 0~65℃, with Power OK alarm contact

VM-5Z2: Max power ≤135W

VM-5Z3: Single 24VDC input, 0~50℃, no Power OK alarm contact

  1. Типичное применение

Turbines, компрессоры, fans and other rotating machinery TSI protection systems, paired with VM-5T shaft displacement, VM-5C eccentricity, VM-5V vibration, VM-5Q speed monitor cards. Widely used for legacy TSI retrofits in thermal & petrochemical plants.

  1. Запчасти & Замена

Статус продукта: VM-5 series is mature legacy model, gradually replaced by VM-7 series; available stock mostly includes used, refurbished and surplus new spares.

Предпочтительная замена: Direct same model VM-5Z1; Z2/Z3 cannot be directly swapped due to different input rating, temperature range and alarm logic.

Распространенные неисправности: No multi-way DC output; Power OK lamp off; failed alarm contact; перегорел входной предохранитель.

Operating Principle of Shinkawa VM-5Z1

It is an isolated multi-output switching power supply, dedicated to powering VM-5 rack TSI monitor cards (вибрация, перемещение, speed etc.). It is a critical component of API 670 rotating machinery protection systems with normally energized alarm relay logic (core requirement for TSI systems).

Signal Flow

Input → EMI Rectifier & Filter → High-frequency PWM Inverter → Isolation Transformer → Multi-secondary Rectifier & Stabilization → DC Outputs + Voltage Monitoring + Power OK Alarm Relay

  1. Input Stage (Wide AC/DC Compatibility)

Диапазон ввода: 85~264VAC (47–63 Гц) or 88~144VDC, shared input circuit for AC & мощность постоянного тока.

First stage: Фильтры электромагнитных помех, surge suppression and input fuse.

вход переменного тока: Converted to high-voltage DC via rectifier bridge.

Вход постоянного тока: Bypass rectifier directly to post stage.

Core difference between VM-5Z1 and Z2/Z3: universal wide AC/DC input.

  1. High-frequency Inversion & Изоляция (Switching Power Core)

High-voltage DC feeds PWM switching tubes to generate high-frequency square waves driving the isolation transformer.

The transformer provides galvanic isolation between primary power side and secondary sensor/card power side (2000VAC withstand voltage).

The primary PWM chip automatically adjusts duty cycle to stabilize all secondary outputs, adopting a multi-output common voltage regulation architecture.

  1. Independent Secondary Rectification, Filtering & Stabilization

Multiple independent secondary windings generate 5 DC power rails for rack logic and sensor circuits:

+5В: Digital circuits, CPU and logic chips (Power OK indicator is powered by this rail, main judgment reference)

+17В: Signal conditioning circuits on monitor boards

+24В: Partial sensor excitation & loop power supply

-15В, -30В: Eddy current probe preamplifiers & analog op-amp negative power

Each rail has independent LC filtering and current limiting to keep low ripple for weak eddy current signal acquisition.

  1. Voltage Monitoring & Power OK Alarm Circuit (Ключевая особенность)

Built-in comparator circuit continuously monitors all 5 output voltages:

All outputs within tolerance window: Green OK lamp ON, relay remains energized (Normally Energized).

Any rail under/over voltage, power loss or internal failure: OK lamp OFF, relay de-energizes and trips, C-form dry contact sends fault signal to DCS.

✅ Critical point: Normally Energized. Relay stays energized under normal operation; releases upon power loss or fault. This is the industry standard fail-safe alarm logic required by TSI systems to avoid missing power failure alarms caused by broken wiring.

  1. Built-in Protection Functions

Выходной сверхток & защита от короткого замыкания: Current limiting hiccup mode, auto recovery after fault cleared.

Защита от перенапряжения: Latch shutdown, requires power cycle reset.

Защита от перегрева: Shuts down output when overtemperature occurs.

The whole unit is fully potted and sealed for anti-vibration and anti-humidity, suitable for power plant and petrochemical field environments; the `/TRP` suffix stands for tropical anti-humidity version.

  1. Coordination with VM-5 Rack

VM-5Z1 occupies 2 slots on VM-5W2 (10-слот) / VM-5H4 (8-слот) стойка. Multi-way DC power is distributed to all VM-5 cards via backplane copper busbars, eliminating separate power supplies for each monitor card.

Redundant dual power configuration (two VM-5Z1 units) is supported with backplane current sharing; single power failure will not interrupt TSI monitoring & protection output, complying with API 670 требования.

  1. Fault Troubleshooting Based on Operating Principle
  2. OK lamp off with no alarm: Main +5V rail undervoltage, monitoring circuit triggers fault directly.
  3. Lamp ON but DCS reports power fault: Burnt relay coil or oxidized contacts (high failure point for long-term energized relays).
  4. One rail low voltage while others normal: Failed rectifier diode or aging filter capacitor on that secondary winding.
  5. Hiccup protection immediately after power-on: Short circuit on backplane caused by faulty monitor card pulling down the power supply.

Full VM-5 TSI Rack Configuration List (Matching VM-5Z1 Power Supply)

Стойка: VM-5W2 (10-слот, supports dual redundant power) / VM-5H4 (8-слот, single power common)

Core layout constraint: One VM-5Z1 occupies 2 слоты

  1. All VM-5 Monitor Card Models & Функции
МодельОписаниеКаналыMeasurement ApplicationТип датчика
VM‑5VShaft Vibration MonitorDual ChannelRadial relative shaft vibrationВК / FK Eddy Current Probe
VM‑5TThrust / Shaft Position MonitorDual ChannelThrust bearing axial displacementВК / FK Eddy Current Probe
VM‑5CRotor Eccentricity MonitorDual ChannelRotor eccentricity (barring & startup)вихревой ток + speed pulse
VM‑5DDifferential Expansion MonitorDual ChannelRotor‑casing differential expansionEddy Current Probe
VM‑5ECasing Expansion MonitorDual ChannelAbsolute casing thermal growthвихревой ток / LVDT
VM‑5QСкорость / Zero Speed MonitorDual ChannelСкорость вращения, направление, zero speed, overspeed protectionMagnetic pickup, gear tooth probe
VM‑5MComposite Vibration MonitorDual ChannelRelative + absolute vibration (shaft + bearing housing vibration)вихревой ток + velocity transducer
VM‑5XValve Position MonitorDual ChannelControl valve opening, actuator travelLVDT

Backplane Accessories (No front panel slot occupation)

VM-5Y1 / VM-5Y2 / VM-5Y3: Relay Output Unit, aggregates Alert/Danger dry contacts from all cards and sends unified alarm signals to DCS/ETS; C-form contacts with normally energized logic.

VM-5COM: Модуль связи (RS485 Modbus RTU), uploads 4-20mA measured values and alarm status to RV-200 diagnostic host.

VM-5Z0: Power failure hold-up unit (0.2s buffer for momentary power loss, optional for critical units).

Схема А: VM-5W2 (10-слот)|Single Power Configuration (1×VM-5Z1)

VM-5Z1 occupies 2 слоты; remaining 8 slots for monitor cards

Standard Turbine TSI Layout (10 слоты)

  1. Slot 1~2: VM-5Z1 (Блок питания)
  2. Слот 3: VM-5T Thrust Shaft Displacement
  3. Слот 4: VM-5C Rotor Eccentricity
  4. Слот 5: VM-5Q Speed / Превышение скорости
  5. Слот 6: VM-5D Differential Expansion
  6. Слот 7: VM-5E Casing Expansion
  7. Слот 8: VM-5V Shaft Vibration 1
  8. Слот 9: VM-5V Shaft Vibration 2
  9. Слот 10: VM-5M Composite Vibration (Bearing Vibration spare)

Backplane accessories: VM-5Y Relay Unit + VM-5COM Communication Module (backplane mounted, no slot occupied)

Схема Б: VM-5W2 (10-слот)|Dual Redundant Power (API670 Standard, Most Popular for Power Plants)

Two VM-5Z1 units (2 slots each) → total 4 slots occupied; 6 slots left for monitor cards

  1. Слот 1-2: VM-5Z1 1 (Основная мощность)
  2. Слот 3-4: VM-5Z1 2 (Standby Power, hot redundant with backplane current sharing)
  3. Слот 5: VM-5T Thrust Displacement
  4. Слот 6: VM-5C Rotor Eccentricity
  5. Слот 7: VM-5Q Rotational Speed
  6. Слот 8: VM-5D Differential Expansion
  7. Слот 9: VM-5V Shaft Vibration A
  8. Слот 10: VM-5V Shaft Vibration B

✅ Redundancy Logic: Two independent power inputs with diode current sharing on backplane. Failure of one VM-5Z1 triggers Power OK alarm without interrupting TSI monitoring & protection output, fully complying with API670 rotating machinery protection standard.

Схема С: VM-5H4 (8-слот)|Single VM-5Z1 (Small Turbines, Компрессоры & Фанаты)

VM-5Z1 occupies 2 слоты; remaining 6 slots available

Compact Compressor/Fan TSI Configuration

  1. Слот 1-2: VM-5Z1
  2. Слот 3: VM-5V Shaft Vibration 1
  3. Слот 4: VM-5V Shaft Vibration 2
  4. Слот 5: VM-5T Shaft Displacement
  5. Слот 6: VM-5Q Rotational Speed
  6. Слот 7: VM-5M Composite Vibration
  7. Слот 8: Spare monitor card slot

Front-end Sensor Matching List

VK-202A / VK-302P / VK-602P: Eddy current displacement probes (shaft vibration, позиция, eccentricity, дифференциальное расширение)

FK series: High-temperature eddy current probes (high-temperature casing area)

RV Magnetic Pickup: Speed input for VM-5Q monitor

Velocity Transducer: Bearing vibration input for VM-5M

LVDT: VM-5E casing expansion & VM-5X valve position measurement

Выбор & Layout Pitfall Avoidance

  1. VM-5Z1 always occupies 2 слоты; cannot be treated as single-slot module. Z2/Z3 also take 2 slots and cannot be mixed due to different input rating and alarm contact logic.
  2. All monitor cards have two fully independent channels, each with separate Alert (Pre-alarm) and Danger (Путешествие) C-form normally energized relay contacts; supports latching or auto reset.
  3. 4-20mA analog output: Each card has built-in recorder output; alternatively all values can be uploaded centrally via Modbus through VM-5COM.
  4. Tropical version: Add `/TRP` suffix to all card models for coastal & high-humidity power plants (anti-corrosion & anti-moisture treatment).
  5. Expansion limit: Dual power 10-slot rack can only accommodate max 6 monitor cards; additional VM-5 racks are required for more measurement points.

Recommended Spare Parts Kit for One Rack

VM-5Z1 Power Supply Unit (full spare)

Common monitor cards: VM-5V, VM-5T, VM-5Q

Eddy current probes, extension cables and preamplifiers

VM-5Y relay unit & VM-5COM communication card

Full VM-5 TSI I/O List (VM-5W2 10-slot Rack, Dual Redundant VM-5Z1 Power Supply)

Rack Layout Recap: Slot1-2 VM-5Z11; Slot3-4 VM-5Z12; Slot5 VM-5T; Slot6 VM-5C; Slot7 VM-5Q; Slot8 VM-5D; Slot9 VM-5V(А); Slot10 VM-5V(Б)

Backplane Modules: VM-5Y (Alarm Aggregation Relay), VM-5COM (Modbus RTU Communication)

Rules:

  1. Every monitor card has two independent channels CH1 / CH2. Each channel has separate Alert (Pre-alarm) & Danger (Путешествие) C-form normally energized dry contacts plus one isolated 4-20mA analog output.
  2. Модбус: VM-5COM acts as Modbus slave; register addresses shown below are reference offsets (final addresses follow Shinkawa manual 6H14).
  3. Dry contacts are divided into two groups: Local card alarm contacts and VM-5Y aggregated alarm contacts (to ETS/DCS).
  4. Power failure signals: Independent Power OK contacts from each VM-5Z1; only digital alarm, нет аналогового выхода.

Часть 1: Dry Contact List (C-form, Normally Energized)

Card ModelКаналИмя сигналаТип контакта
VM‑5Z1 #1—Источник питания #1 Вина (Power Fail)C‑form, Normally Energized
VM‑5Z1 #2—Источник питания #2 Вина (Power Fail)C‑form, Normally Energized
VM‑5T Thrust DisplacementCH1Thrust Displacement A Alert (Pre‑alarm)C‑form, Normally Energized
VM‑5T Thrust DisplacementCH1Thrust Displacement A Danger (Путешествие)C‑form, Normally Energized
VM‑5T Thrust DisplacementCH2Thrust Displacement B Alert (Pre‑alarm)C‑form, Normally Energized
VM‑5T Thrust DisplacementCH2Thrust Displacement B Danger (Путешествие)C‑form, Normally Energized
VM‑5C EccentricityCH1Rotor Eccentricity A AlertC‑form, Normally Energized
VM‑5C EccentricityCH1Rotor Eccentricity A DangerC‑form, Normally Energized
VM‑5C EccentricityCH2Rotor Eccentricity B AlertC‑form, Normally Energized
VM‑5C EccentricityCH2Rotor Eccentricity B DangerC‑form, Normally Energized
VM‑5Q Speed / Zero SpeedCH1Speed A AlertC‑form, Normally Energized
VM‑5Q Speed / Zero SpeedCH1Speed A Danger (Overspeed Trip)C‑form, Normally Energized
VM‑5Q Speed / Zero SpeedCH2Speed B AlertC‑form, Normally Energized
VM‑5Q Speed / Zero SpeedCH2Speed B Danger (Overspeed Trip)C‑form, Normally Energized
VM‑5D Differential ExpansionCH1Differential Expansion A AlertC‑form, Normally Energized
VM‑5D Differential ExpansionCH1Differential Expansion A DangerC‑form, Normally Energized
VM‑5D Differential ExpansionCH2Differential Expansion B AlertC‑form, Normally Energized
VM‑5D Differential ExpansionCH2Differential Expansion B DangerC‑form, Normally Energized
VM‑5V Shaft Vibration ACH1Shaft Vibration A‑X AlertC‑form, Normally Energized
VM‑5V Shaft Vibration ACH1Shaft Vibration A‑X DangerC‑form, Normally Energized
VM‑5V Shaft Vibration ACH2Shaft Vibration A‑Y AlertC‑form, Normally Energized
VM‑5V Shaft Vibration ACH2Shaft Vibration A‑Y DangerC‑form, Normally Energized
VM‑5V Shaft Vibration BCH1Shaft Vibration B‑X AlertC‑form, Normally Energized
VM‑5V Shaft Vibration BCH1Shaft Vibration B‑X DangerC‑form, Normally Energized
VM‑5V Shaft Vibration BCH2Shaft Vibration B‑Y AlertC‑form, Normally Energized
VM‑5V Shaft Vibration BCH2Shaft Vibration B‑Y DangerC‑form, Normally Energized
Alarm Aggregation Unit—TSI System General Danger AlarmC‑form
Alarm Aggregation Unit—TSI System General Pre‑alarmC‑form

Рейтинг контактов: 250VAC 5A / 30VDC 5A. Normally Energized = Closed under normal operation, open upon fault / потеря мощности, fully complying with API670 fail-safe alarm requirement.

Часть 2: 4-20mA Analog Output List (Isolated AO on each card)

СлотCard ModelКаналИмя сигналаТипичный диапазон (Configurable on card)Выход
5VM‑5TCH1Thrust Displacement A-1.0 ~ +1.0 мм4‑20mA
5VM‑5TCH2Thrust Displacement B-1.0 ~ +1.0 мм4‑20mA
6VM‑5CCH1Rotor Eccentricity A0 ~ 0.2 мм4‑20mA
6VM‑5CCH2Rotor Eccentricity B0 ~ 0.2 мм4‑20mA
7VM‑5QCH1Rotational Speed A0 ~ 6000 об/мин4‑20mA
7VM‑5QCH2Rotational Speed B0 ~ 6000 об/мин4‑20mA
8VM‑5DCH1Differential Expansion A-5 ~ +25 мм4‑20mA
8VM‑5DCH2Differential Expansion B-5 ~ +25 мм4‑20mA
9VM‑5VCH1Shaft Vibration A X‑axis0 ~ 200 мкм4‑20mA
9VM‑5VCH2Shaft Vibration A Y‑axis0 ~ 200 мкм4‑20mA
10VM‑5VCH1Shaft Vibration B X‑axis0 ~ 200 мкм4‑20mA
10VM‑5VCH2Shaft Vibration B Y‑axis0 ~ 200 мкм4‑20mA

Примечание: 4mA = lower range limit; 20mA = upper range limit. Two independent AO channels per card. This analog signal is physically separated from Modbus communication for redundant data acquisition.

Часть 3: Modbus RTU Point List (VM-5COM, 16-bit Holding Registers)

Default communication parameters: 9600, 8, Н, 1; slave address set via DIP switch; register addresses are reference values (final mapping follows Shinkawa manual 6H14).

Data type: Measured values (INT16 with scaling factor); alarm status (Bit mapped UINT16).

Register AddressTag NameОписаниеData Type
40001Thrust_Displacement_A_CH1Axial displacement measurementINT16
40002Thrust_Displacement_B_CH2Axial displacement measurementINT16
40003Eccentricity_A_CH1Rotor eccentricity measurementINT16
40004Eccentricity_B_CH2Rotor eccentricity measurementINT16
40005Speed_A_CH1Rotational speed measurementINT16
40006Speed_B_CH2Rotational speed measurementINT16
40007Diff_Expansion_A_CH1Differential expansion measurementINT16
40008Diff_Expansion_B_CH2Differential expansion measurementINT16
40009Shaft_Vib_A_X_CH1Shaft vibration peak‑peak valueINT16
40010Shaft_Vib_A_Y_CH2Shaft vibration peak‑peak valueINT16
40011Shaft_Vib_B_X_CH1Shaft vibration peak‑peak valueINT16
40012Shaft_Vib_B_Y_CH2Shaft vibration peak‑peak valueINT16
40100Channel_Alarm_Word_1Bit0~Bit11: Channel Alert/Danger + sensor breakUINT16
40101Power_Status_WordБит0: VM‑5Z1#1 Fault; Бит1: VM‑5Z1#2 FaultUINT16
40102Rack_System_StatusКоммуникация, card self‑test & backplane fault flagsUINT16

Bit Definition for Register 40100 (Channel Alarm Word)

Бит0: VM-5T CH1 Alert

Бит1: VM-5T CH1 Danger

Бит2: VM-5T CH2 Alert

Bit3: VM-5T CH2 Danger

Bit4: VM-5C CH1 Alert

Bit5: VM-5C CH1 Danger

Bit6: VM-5C CH2 Alert

Bit7: VM-5C CH2 Danger

Subsequent bits follow in sequence and can be extended according to actual measurement points.

Часть 4: Design Notes & Signal Redundancy

  1. ETS Trip Logic: All Danger trip contacts shall adopt 1-out-of-2 or 2-out-of-2 voting logic per turbine protection standards. Power fault contacts shall only generate alarm, not initiate ETS trip.
  2. Triple Redundant Signal Path: Hard relay contacts (safety trip) + 4-20mA analog (DCS trend) + Модбус РТУ (host diagnostic data) are fully independent physical links.
  3. Sensor Break Detection: Every monitor card has built-in probe break detection; open circuit will trigger Alert/Danger alarm and set corresponding bit in Modbus status word.
  4. If you need a simplified I/O list for single-power VM-5W2 / VM-5H4 rack, I can provide a trimmed version immediately.

Часть 5: I/O Quantity Summary (Dual Power Scheme)

Power digital contacts: 2 очки

Channel Alert pre-alarm contacts: 12 очки

Channel Danger trip contacts: 12 очки

VM-5Y aggregated alarm contacts: 2 очки

4-20mA analog output channels: 12 каналы

Modbus measurement registers: 12 шт.; status registers: 3 шт.

Предыдущий:

Оставить ответ

Оставить сообщение