Schneider XBTGT7340 Цветной сенсорный экран

Статус: Снято с производства (End of production: 31 декабрь 2015; End of official service: 31 декабрь 2025). No new original units available; only used/refurbished units on the market.

Позиционирование продукта: 15-inch advanced color touchscreen with video input, CF card slot and expansion bus card slot

Ключевые характеристики

Отображать: 15″ Цветной TFT ЖК-дисплей, 1024×768 XGA, 65536 цвета, analog resistive touch

Источник питания: 24 В Вашингтоне

Процессор: RISC 266 МГц

Память: 32 МБ флэш-памяти (application program); 512 КБ СРАМ (data retention with lithium battery backup); supports CF card (Макс. 1 ГБ)

Программное обеспечение для программирования: Виджео Дизайнер (use VJD6.2 SP5 or higher for project migration to replacement models)

Operating system: Harmony

Защита передней панели: IP65 (panel mount installation)

📶 Interface List

1. COM1: RS232 / RS422 / RS485
2. COM2: RS485 (with terminal resistor DIP switch)
3. RJ45 Ethernet (10/100 Мбит/с, Модбус TCP)
4. 2 × USB host ports
5. CF card slot
6. Video input (NTSC/PAL, for camera connection — core feature of this model)
7. Expansion slot: supports Profibus DP / DeviceNet bus cards
8. Часы реального времени RTC

📐 Panel Cutout Dimensions

Cutout size: 383.5 × 282.5 мм (терпимость +1/-0 мм)

Suitable panel thickness: 1.6~10 mm; maximum corner radius R3 mm

🔁 Official Replacement Options (2 choices)

1. No video capture required: HMIG3U + HMIDT732 (15-inch modular HMI set)
2. Video input must be retained: HMIG5U22 + HMIDT732

Project migration: Open the original XBTGT7340 project in Vijeo Designer, simply change the target model, fine-tune a small number of communication drivers; no need to redesign screens.

📌 Supported Communication Protocols

Modbus RTU/TCP, Uni-TE, Mitsubishi MC, Omron Host Link/FINS, Allen-Bradley DF1, Siemens S7 protocols, plus mainstream PLC drivers for GE, Фудзи, Дельта, Синдже, ЛС, Inovance etc.

⚠️ Common Faults for Used / Repaired Units

Aging internal lithium battery → lost clock & SRAM data

Старение сенсорной панели & drift

CCFL backlight tube failure (not LED backlight)

Poor contact or damage of CF card

Malfunction of the video input circuit

Communication Protocols of XBTGT7340 (Vijeo Designer Drivers)

Divided into on-board native protocols + additional fieldbus via optional expansion cards. Drivers are selected and loaded inside Vijeo Designer projects.

Native Шнайдер Электрик Протоколы

1. Модбус РТУ (COM1/COM2 serial ports, RS232/422/485)
2. Модбус TCP (Порт Ethernet RJ45)
3. Uni-TE (for legacy Schneider Premium / Micro / Nano PLCs)
4. Modbus Plus (requires external gateway XBTZGUMP; no onboard hardware)
5. FIPWAY / FIPIO (FIP fieldbus; requires external gateway)

Native Third-Party PLC Serial & Ethernet Drivers

Siemens SIMATIC: S7-200 PPI, S7-300/400 MPI, S7 TCP (S7 protocol)

Mitsubishi Melsec: FX serial, Q-series serial/Ethernet (MC protocol)

Omron Sysmac: Ссылка на хост, ФИНС (сериал / Ethernet)

AllenBradley: DF1, 485 дирхамов, ЭтерНет/IP

Additional drivers available for GE, Фудзи, Дельта, Yonghong, ЛС, Inovance and other mainstream PLCs in the Vijeo Designer driver library.

Optional Expansion Slot (Fieldbus Cards, extra hardware required)

Profibus DP slave card XBTZGPDP → Profibus DP

DeviceNet card XBTZGDVN → DeviceNet

Only one card can be fitted at a time: Profibus DP or DeviceNet, не оба одновременно.

📌 Port Assignment

COM1: RS232 / RS422 / RS485 (supports Modbus RTU, ИЦП, ИМБ, Host Link etc.)

COM2: Fixed RS485 (preferred for Modbus RTU communication)

RJ45: 10/100 Мбит/с Ethernet (Модбус TCP, S7 TCP, ФИНС, ЭтерНет/IP)

USB ports: Only for program download & регистрация данных; no PLC communication drivers supported

⚠️ Important Limitations

1. Old firmware + early VJD versions have poor compatibility with newer PLCs (S7-1200/1500 native S7 protocol); use Modbus TCP as fallback.
2. Modbus Plus and FIPWAY need external gateways; the HMI has no built-in hardware for these buses.
3. Only one expansion bus card can be installed (Profibus DP or DeviceNet).

Full Model List of Schneider Magelis / Harmony HMIs

Two main product lines: Legacy XBT series (прекращено, including XBTGT7340) and Current Harmony series (active sales).

Software abbreviations: VJD = Vijeo Designer; EOTE = EcoStruxure Operator Terminal Expert

1. Discontinued Legacy XBT Series (Magelis, Виджео Дизайнер)

XBTGT (Classic Advanced HMI — same family as XBTGT7340)

XBTGT1105 / XBTGT1135 / XBTGT1335 | 3.8″

XBTGT2110 / XBTGT2120 / XBTGT2130 / XBTGT2220 / XBTGT2330 / XBTGT2430 | 5.7″

XBTGT4230 / XBTGT4330 / XBTGT4340 | 7.5″

XBTGT5230 / XBTGT5330 / XBTGT5340 / XBTGT5430 | 10.4″

XBTGT6330 / XBTGT6340 | 12.1″

XBTGT7340 | 15″ (with video input)

Функции: Dual serial ports, Ethernet, CF card slot, optional Profibus/DeviceNet expansion cards; production ended 2015, service ended 31 декабрь 2025.

XBTGK (Трогать + Keypad Combined Terminals)

XBTGK2120, XBTGK2330, XBTGK5330, XBTGK5340

XBTGH (Handheld Teach Pendant with Emergency Stop)

XBTGH2900, XBTGH5900

XBTGTW (Windows XPe Open HMI)

XBTGTW5340, XBTGTW6340, XBTGTW7340

XBTGC (HMI Controller with Built-in I/O)

XBTGC2120, XBTGC2220, XBTGC2330

XBTN / XBTR / XBTRT (Text Panels, Monochrome Small HMIs)

XBTN400, XBTN401, XBTN410, XBTRT500, XBTR410, XBTR510

Программное обеспечение: Vijeo Designer Lite; serial only, no Ethernet port.

1. Current Harmony Series (Активные продажи)
2. Harmony STO / STU (Compact Economy HMI, 3.5~5.7″)

СТО: HMISTO705, HMISTO715, HMISTO725 (EOTE)

STU: HMISTU655, HMISTU855 (VJD, compatible with legacy projects)

2. Harmony GTO (Standard Advanced HMI, Vijeo Designer — direct XBTGT replacement)

HMIGTO2310 (5.7″)

HMIGTO4310 (7.5″)

HMIGTO5310 (10.4″)

HMIGTO6310 (12.1″)

Stainless steel hygienic version: HMIGTOxx10S (еда & pharmaceutical applications)

3. Harmony GTU (Modular Split HMI: BOX Controller + Display Panel, VJD — Top choice for XBTGT7340 replacement)

Controller BOX:

HMIG3U (Стандартная модель)

HMIG5U22 (Open model with video input support, matching XBTGT7340 camera function)

Display Panels HMIDT:

ХМИДТ351 / HMIDT542 / HMIDT642 / HMIDT732 (15-дюйм, matching XBTGT7340 cutout)

4. Harmony ST6 (New Basic HMI, EcoStruxure Operator Terminal Expert)

HMIST6200 (4.3″)

HMIST6400 (7″)

HMIST6500 (10″)

HMIST6600 (12″)

HMIST6700 (15″)

Широкий экран, dual Ethernet + два последовательных порта; cannot run old Vijeo Designer projects directly.

5. Harmony ET6 (Entry-level Economy HMI, EOTE)

HMIET6200, ХМИЭТ6400, HMIET6500, HMIET6700

6. Harmony FT6 (Stainless Steel Hygienic HMI, FDA-compliant for clean rooms)

HMIFT6400, HMIFT6500, HMIFT6700

7. Harmony GK (Клавиатура + Touch Terminals, VJD)

HMIGK5310

8. GTUX (Explosion-proof Outdoor HMI)

HMIGTUX652

9. Промышленный панельный ПК (All-in-one Industrial Touch Computer)

HMIPSA6, HMIPCC series, iPC BOX (HMIBSC…)

📌 Руководство по быстрому выбору (for XBTGT7340 Upgrade)

Legacy VJD project + video input required: HMIG5U22 + HMIDT732

Legacy VJD project + no video required: HMIG3U + HMIDT732

Новый проект (no old program): HMIST6700 (15-inch ST6)

📌 Software Compatibility Rule

Виджео Дизайнер (VJD): XBTGT / XBTGK / GTO / STU / GTU / ГК

EcoStruxure Operator Terminal Expert (EOTE): СТ6 / ET6 / СТО / FT6