Schneider XPSAV11113-24VDC Реле контроля безопасности

1. Model Segment Definition

XPSAV11113-24VDC

XPSAV: Schneider Safety Monitoring Relay Ряд, dedicated to dual-channel safety circuits for emergency stop, safety door and safety light curtain.

11113: Internal contact logic and channel configuration code.

24В постоянного тока: Rated power supply 24V DC.

2. Core Basic Parameters

3. Ключевые особенности
4. Dual-channel redundant input with safety forced-guided contacts;
5. Millisecond-level safety cut-off response;
6. Only supports 24V DC power supply; AC voltage input is prohibited;
7. Built-in self-diagnosis and circuit monitoring functions.
8. Compatible Replacement Models
9. Same-brand direct replacement: Direct replacement with the same model; no upgraded alternative version
10. Одомашненный / Cross-brand compatible models:

Omron G9SA-301 24VDC

Weidmüller Dual-channel Safety Relay 24VDC

Siemens 3RK3 series 24V safety module with equivalent specifications

5. Application Notes

Safety signals must be connected synchronously through dual channels; single-channel connection cannot work normally;

Strictly prohibit mixed use with AC24V power supply, which will directly burn out the module;

Output contacts are only used for safety circuit control and cannot directly drive heavy loads.

Schneider Safety Monitoring Relay Series List & Межбрендовое сравнение

1. Overview of Core Schneider Safety Monitoring Relay Series

Реле контроля безопасности Schneider сосредоточены на серии Preventa XPS., охватывающих полный сценарий функций безопасности, таких как аварийная остановка, защитная дверь, световая завеса безопасности и двуручное управление. Они делятся на базовый тип и универсальный тип., все соответствует EN/ISO 13849-1 и МЭК 61508 стандарты безопасности.

2. Model Segment Coding Rules

Taking XPSAV11113-24VDC as an example, Schneider safety relay model coding follows unified logic:

3. Complete Model List of Each Series

3.1 XPSAV Series (Аварийная остановка + Solid-State Output)

3.2 XPSAF/XPSAFL Series (Standard Emergency Stop / Light Curtain Monitoring)

3.3 XPSAC Series (Basic Emergency Stop Monitoring)

3.4 XPSAR Series (Multi-contact Emergency Stop / Light Curtain Monitoring)

3.5 Universal XPSU Series (Replacement for Traditional Series)

4. Cross-Brand Comparison Table (Основные модели)

5. Рекомендации по выбору & Replacement Precautions
6. Safety Level Matching: The PL / Cat. level and SIL level of the replacement model shall not be lower than the original one.
7. Input Type Compatibility: Distinguish High/Low Level Input and PNP/NPN types; XPSAF supports dual types, while XPSAFL only supports high level.
8. Consistent Reset Mode: Divided into Automatic Reset, Monitored Reset and Manual Reset, which shall match the application scenario.
9. Тип терминала: Suffix P stands for plug-in terminal; no suffix for screw terminal. Pay attention to mounting compatibility during replacement.
10. Напряжение питания: Strictly distinguish DC24V, AC230V and Universal AC/DC to avoid module burnout.
11. Series Replacement Roadmap

Schneider is gradually replacing traditional series with the XPSU Universal Series:

XPSAR → Combined XPSUAF + XPSUEP or XPSUAT series

XPSATE/XPSATR → XPSUAT series

XPSAF/XPSAV → XPSUAF series