Контактор,автоматический выключатель,солнечный инвертор,электрический счетчик,солнечные батареи
SMC AW series modular filter regulator, 3/8 размер порта в дюймах, 5Точность фильтрации мкм, оснащен функцией обратного потока и встроенным манометром белого цвета.. Используется для предварительной подготовки сжатого воздуха в пневматических системах., подача чистого и стабильного сжатого воздуха к электромагнитным клапанам, цилиндры и другие пневматические компоненты.
- Определение сегмента модели
| Модельный сегмент | Значение | Описание |
| AW | Серия продуктов | Identification of SMC modular filter regulator series |
| 30 | Размер кадра | Размер 30, flow rate approx. 1400 L/min (ANR) |
| 3 | Port Specification | 3/8 inch (Rc thread) |
| E1 | Special Function | E = With reverse flow function; 1 = Standard type |
| Вт | Pressure Gauge Type | White built-in pressure gauge (with limit indicator) |
| Б | Режим дренажа | Manual drain (B = Standard type) |
| SMC | Логотип бренда | SMC Corporation, Япония |
- Таблица параметров основной спецификации
| Категория параметра | Technical Index | Примечания |
| Основные параметры | ||
| Working Fluid | Compressed Air | Excluding corrosive gas and chemically active gas |
| Макс. Operating Pressure | 1.0 MPa (10 бар) | Exceeding may damage internal components |
| Pressure Setting Range | 0.02~0.8 MPa | Standard pressure regulation range |
| Filtration Precision | 5μm | Effectively filters solid particles and oil mist |
| Port Size | Rc3/8 (3/8 inch taper pipe thread) | Inlet and outlet identical |
| Flow Characteristic | 1400 L/min (ANR) | At pressure drop of 0.02 MPa |
| Температура окружающей среды | -5℃ ~ +60℃ | Under non-freezing condition |
| Fluid Temperature | -5℃ ~ +60℃ | |
| Масса | Приблизительно. 0.36 кг | Including pressure gauge |
| Структурные характеристики | ||
| Pressure Regulation Method | Knob type (with locking function) | Prevent misoperation |
| Режим дренажа | Manual drain | Rotate bottom knob clockwise for draining |
| Pressure Gauge | White built-in, 0~1.0 MPa | With limit indicator for easy pressure setting management |
| Bowl Material | Polycarbonate (PC) | Transparent with metal protective cover |
| Filter Element | Polyester Fiber | Replaceable, service life approx. 1000 часы |
| Reverse Flow Function | Стандартная конфигурация | Allows reverse airflow for special circuit application |
| Installation Characteristics | ||
| Тип монтажа | Modular mounting / Independent mounting | Can be combined with other SMC air preparation components |
| Mounting Direction | Vertical installation (bowl facing downward) | Ensure good drainage performance |
| Flow Direction | Left inlet, Right outlet | Standard flow direction |
- Список аксессуаров & Рекомендации по установке
3.1 Standard Package Contents
AW30-03E1-W-B Filter Regulator main unit
White built-in pressure gauge (pre-installed)
Metal bowl protective cover (pre-installed)
Filter element (pre-installed)
Монтажный кронштейн (for modular assembly)
Product manual (including maintenance instructions)
3.2 Optional Accessories
| Part No. | Имя | Функция |
| AW30-03-D | Filter Element (Spare Part) | 5Точность фильтрации мкм, periodic replacement |
| KQ2H03-00 | Push-in Fitting | Simplify tube connection |
| AME30-03 | Lubricator | Combine with filter to form FRL unit |
| AC30-03 | Air Filter | Front coarse filtration to extend main filter service life |
| AW30-X2622 | SUS316 Stainless Steel Version | Suitable for corrosive environments |
3.3 Ключевые моменты установки
Mounting Direction: Must be installed vertically with the bowl facing downward to ensure smooth discharge of condensed water.
Connection Method: Rc3/8 threaded connection; sealing tape or sealant is recommended, tightening torque 15~20 Nm.
Modular Combination: Can be assembled with SMC series lubricators and regulators via modular clips to save installation space.
Maintenance Clearance: Reserve ≥50mm space at the bottom for manual draining and filter replacement.
Air Pre-filtration: It is recommended to install a main line filter at the upstream with filtration precision ≤40μm to protect this component.
- Функции & Сценарии применения
Основные функции
- Gas-Liquid Separation: Effectively separate moisture and impurities from compressed air via centrifugal force and filter element.
- Pressure Regulation: Precisely adjust output pressure to keep pneumatic system stable.
- Pressure Indication: White built-in pressure gauge with limit indicator for intuitive pressure monitoring and safety range setting.
- Reverse Flow Protection: Built-in reverse flow valve allows reverse airflow and prevents circuit pressure impact.
- Manual Draining: Bottom knob draining design, простота в эксплуатации, suitable for low-humidity environments.
Типичные сценарии применения
| Область применения | Применимое оборудование | Основная функция |
| Automated Production Line | Assembly line, Conveyor system | Supply clean and stable air to solenoid valves and cylinders |
| Machine Tool Industry | Machining center, CNC lathe | Protect pneumatic fixtures and tool changing systems |
| Packaging Equipment | Packaging machine, Palletizer | Stabilize speed and force of pneumatic actuators |
| Производство электроники | Semiconductor equipment, Машина для размещения SMT | Prevent fine particles from contaminating precision components |
| Еда & Beverage | Filling equipment, Packaging line | Meet food-grade pneumatic system requirements |
| Автомобильное производство | Welding robot, Coating line | Protect pneumatic tools and precision inspection equipment |
- Cross-Brand Alternative Comparison Table
| Бренд | Модель | Ключевые параметры | Совместимость | Ценовой диапазон |
| SMC (Оригинал) | AW30-03E1-W-B | 3/8″, 5μm, 0.02~0.8MPa, Reverse flow / White gauge | 100% | 600–800 CNY |
| FESTO | LFR-3/8-D-MINI | 3/8″, 5μm, 0.05~0.8MPa, Manual drain | Высокий | 500–700 CNY |
| Шнайдер | V50A313A-03 | 3/8″, 5μm, 0.05~0.8MPa, With pressure gauge | Середина | 400–600 CNY |
| AIRTAC | GFR300-03 | 3/8″, 5μm, 0.05~0.8MPa, Manual drain | Середина | 200–300 CNY |
| NORGREN | B72G-3GK-AD3-RMN | 3/8″, 5μm, 0.07~0.7MPa, With pressure gauge | Высокий | 700–900 CNY |
- Рекомендации по выбору & Альтернативные решения
Selection Mnemonic
Port Matching → Flow Demand → Filtration Precision → Pressure Range → Drainage Mode → Special Function
Selection Decision Guide
- Port Size: Select 1/4″(02), 3/8″(03) or 1/2″(04) according to pipeline; this model is 3/8″.
- Flow Demand: Размер 30 for medium flow (1400 L/min); choose Size 20 for low flow, Размер 40/60 for high flow.
- Filtration Precision: Standard 5μm for most industrial scenarios; precision equipment optional 2μm (suffix with “Г”).
- Pressure Range: 0.02~0.8MPa for general use; select 1.6MPa version for high-pressure systems.
- Режим дренажа: Manual drain (Б) for low humidity; automatic drain (suffix with “DP”) for high humidity.
- Special Function: Choose type “Э” for reverse flow; “BG” for oil mist separation; “X2622” for stainless steel version.
Recommended Alternatives
- Budget Limited: Adopt AIRTAC GFR300-03 or domestic alternatives to meet basic functions with cost performance.
- System Integration: FESTO LFR series for seamless compatibility with FESTO pneumatic components; NORGREN B72G series for high-end applications.
- Function Upgrade: Upgrade to AW30-03BD-M5 (auto drain + pressure gauge port) for unattended operation.
- Harsh Environment: Select AW30-03E1-W-B-X2622 (SUS316 material) for corrosive conditions.
- Air Freight Compliance & Сертификация
Сертификация CE: Compliant with EN ISO 4414, ИСО 8573-1.
Air Freight Assessment: No built-in lithium battery / supercapacitor; classified as ordinary industrial pneumatic part, no special air freight restrictions.
Packaging Requirement: Anti-static packaging; transport temperature -40℃~+85℃, avoid heavy impact.
Material Compliance: Polycarbonate bowl complies with RoHS standard, applicable to food, electronics and other sensitive industries.
- Troubleshooting Quick Reference
| Явление неисправности | Возможная причина | Решение |
| Unstable Output Pressure | Clogged filter element, fatigue pressure spring, air supply fluctuation | Replace filter element, check air source, recalibrate pressure |
| Pressure Not Adjustable | Regulating knob locked, diaphragm damaged, valve core stuck | Unlock knob, replace diaphragm, clean valve core |
| No Pressure Gauge Reading | Broken pressure gauge, blocked pipeline, no air supply | Replace pressure gauge, clear pipeline, check air source |
| Difficult Draining | Tilted bowl, blocked drain outlet, excessive condensed water | Adjust mounting angle, clean drain port, increase draining frequency |
| Air Leakage | Aging seals, loose thread connection, damaged diaphragm | Replace seals, fasten thread, replace diaphragm |
| Reverse Flow Failure | Damaged reverse valve, foreign matter jamming | Disassemble for cleaning or replace reverse flow assembly |
- AW30 Series Full Model & Order Number List
| Номер заказа. | Модель | Port Spec | Filtration Precision | Special Function | Режим дренажа | Pressure Gauge Type |
| AW30-03E1-W-B | AW30-03E1-W-B | Rc3/8 | 5μm | Reverse Flow | Руководство | White Built-in |
| AW30-03-B | AW30-03-B | Rc3/8 | 5μm | No Reverse Flow | Руководство | Standard Built-in |
| AW30-03E-B | AW30-03E-B | Rc3/8 | 5μm | Reverse Flow | Руководство | Standard Built-in |
| AW30-03BG-B | AW30-03BG-B | Rc3/8 | 5μm | Reverse Flow + Oil Mist Separation | Руководство | Standard Built-in |
| AW30-03BD-B | AW30-03BD-B | Rc3/8 | 5μm | No Reverse Flow | Автоматический | Standard Built-in |
| AW30-03ED-B | AW30-03ED-B | Rc3/8 | 5μm | Reverse Flow | Автоматический | Standard Built-in |
| AW30-03E1-W-D | AW30-03E1-W-D | Rc3/8 | 5μm | Reverse Flow | Автоматический | White Built-in |
| AW30-03G-B | AW30-03G-B | Rc3/8 | 2μm | No Reverse Flow | Руководство | Standard Built-in |
| AW30-03EG-B | AW30-03EG-B | Rc3/8 | 2μm | Reverse Flow | Руководство | Standard Built-in |
| AW30-03-X2622 | AW30-03-X2622 | Rc3/8 | 5μm | No Reverse Flow | Руководство | Standard Built-in |
- Цикл технического обслуживания & Рекомендации по техническому обслуживанию
- Filter Element Replacement: Replace every 1000 hours or 3 months under normal working conditions; shorten to 1 month in harsh environments.
- Bowl Cleaning: Inspect monthly, remove internal dirt and keep transparent visibility.
- Seal Inspection: Check O-rings, diaphragms and other seals every 6 месяцы; replace in time if aging.
- Pressure Calibration: Calibrate output pressure quarterly to meet system requirements.
- Draining Operation: Perform manual draining daily after work to prevent condensed water accumulation affecting filtering performance.
