LUTRON VB-8200 Portable Vibration Meter

ยี่ห้อ: LUTRON, ไต้หวัน

LUTRON VB-8200 User Manual PDF

It is a handheld industrial vibration meter for equipment inspection, vibration severity measurement of มอเตอร์, ปั๊มและพัดลม. It only measures vibration velocity and acceleration, without displacement measurement (VB-8220 is the version with displacement function).

✅ ฟังก์ชั่นหลัก

1. การวัด: Vibration velocity and vibration acceleration; supports RMS (รูทหมายถึงสแควร์) and Peak reading.
2. Reading functions: Data Hold, สูงสุด / Minimum value recording.
3. การสื่อสาร: Isolated RS232 serial output, compatible with host computer software for data acquisition and recording.
4. Large LCD display, low battery indicator and auto power-off.
5. Separated piezoelectric vibration probe, supplied with magnetic base for easy attachment to equipment housing for measurement.
6. Complies with ISO 2954 for vibration transducers, used for equipment vibration severity assessment per ISO 2372.

📋 Technical Specifications

🛠️ การใช้งานทั่วไป

Routine inspection of rotating machinery: มอเตอร์, ปั๊มหอยโข่ง, แฟน ๆ, gearboxes, เครื่องอัดอากาศ

Preliminary screening of faults: rotor unbalance, misalignment, bearing looseness, foundation looseness

Factory predictive maintenance, equipment acceptance, vibration severity classification (ISO2372)

Laboratory and factory outgoing simple vibration testing

📦 Standard Accessories

หน่วยหลัก, separated vibration sensor, magnetic mounting base, 9V battery, hard carrying case. Host computer acquisition software is optional.

⚠️ Model Differentiation (Easily Confused Models)

VB-8200: Velocity + การเร่งความเร็ว, no displacement, RS232

VB-8220: Velocity + การเร่งความเร็ว + Peak-to-Peak displacement (2mm p-p)

VB-8212: รุ่นอัพเกรด, some versions with temperature measurement

📌 Operation Notes

1. Magnetic base is suitable for flat metal surfaces; use probe tip contact measurement for rough surfaces.
2. Lower frequency limit at 10Hz, not suitable for low-frequency large-displacement equipment (เช่น. large steam turbines). Low-frequency measurement requires dedicated low-frequency vibration meters.
3. Only for simple inspection and severity evaluation. Spectrum analysis and bearing envelope demodulation require professional vibration analyzers (not this unit).

❗ Common Troubleshooting

1. Fluctuating readings: Broken probe cable, poor contact of magnetic base, rusted measuring surface.
2. Zero reading: Damaged probe or loose probe connector.
3. Failed PC data upload: RS232-to-USB driver fault, mismatched communication parameters.
4. Low battery warning: Insufficient battery voltage leads to degraded reading accuracy.

การอ้างอิงการเลือกทางเลือก

ทางเลือกภายในประเทศ: Anbo VBT series, VM series vibration meters.

นำเข้าเทียบเท่า: บีเค, IMV portable vibration meters.

Core Application of LUTRON VB-8200 Vibration Meter

สรุป: Handheld simple vibration measuring instrument, used to measure vibration severity of rotating machinery for routine predictive maintenance, judge whether equipment vibration exceeds threshold and screen early faults.

Measurable Physical Quantities

Vibration Velocity VEL: มิลลิเมตร/วินาที (ใช้กันมากที่สุด; ISO2372 equipment rating uses this parameter)

Vibration Acceleration ACC: เมตร/วินาที²

Reading modes: อาร์เอ็มเอส / Peak; with max/min recording and data hold

❗No support for vibration displacement, spectrum analysis, demodulation or time-domain waveform. Cannot perform precision fault diagnosis; only severity evaluation.

Main Measurement Objects (Factory Inspection)

มอเตอร์, ปั๊มหอยโข่ง, แฟน ๆ, พัดลมระบายความร้อนทาวเวอร์, ตัวลดเกียร์, เครื่องอัดอากาศ

Small rotating production equipment

Types of Faults for Preliminary Screening (Qualitative)

1. Rotor unbalance: Uneven mass of rotating parts causing high vibration
2. Misalignment: Coupling misalignment between motor and pump
3. Bearing deterioration: Bearing wear leads to vibration increase (only detects higher vibration level; cannot identify specific bearing fault type)
4. Loose anchor / พื้นฐาน, insufficient housing rigidity
5. Imbalance caused by fouling and deposit buildup on blades or impellers

Typical Working Scenarios

1. Routine equipment inspection: Inspectors measure vibration at fixed measuring points periodically, record values and compare historical data to monitor vibration rising trend.
2. อุปกรณ์ใหม่ / overhaul acceptance: Measure vibration after equipment maintenance and judge compliance against ISO2372 standard.
3. Preliminary fault screening: Rapid vibration measurement when abnormal noise occurs to assess vibration severity. If vibration exceeds limit, use professional vibration analyzer for further spectrum diagnosis.
4. การบันทึกข้อมูล: Built-in RS232 serial port connects to PC for vibration data collection and inspection report generation.

ข้อจำกัด (Critical for Avoiding Misuse)

1. Frequency range: 10Hz ~ 1kHz, not applicable to low-frequency large units (steam turbines, large low-speed motors)
2. Only severity measurement, no spectrum function to distinguish fault types. It only tells you “vibration is high”, and cannot easily tell whether it is unbalance or bearing failure.
3. Not suitable for high-frequency impact measurement of precision bearings (no envelope demodulation function).
4. Only measures casing surface vibration, not shaft vibration (shaft vibration requires eddy current probes).

Simple Example

For a water pump, measure vibration velocity at bearing position weekly.

ISO2372 standard: Within 10mm/s = Good; above 11.2mm/s requires monitored attention; above 18mm/s is dangerous and equipment shall be shut down for maintenance. VB-8200 reads this mm/s value.

Full Model List of LUTRON VB-82xx Series Vibration Meters

ซีรีย์เดียวกัน (VB82xx inspection vibration meters, 10Hz～1kHz, separated piezoelectric probe, ISO2954). VB-8200 is the base model. Models differ by measurement parameters, data storage and channel count.

เซ็นเซอร์ที่เข้ากันได้ (Interchangeable within Series)

VB-83: Standard piezoelectric probe for VB82xx series, equipped with magnetic base, BNC connector. Interchangeable on VB-8200 / VB-8206SD / BVB-8207SD and other models.

✅ Quick Selection Guidelines

1. Displacement required? VB-8200/8201HA/8210/PVB820: no displacement; 8220, 8206เอสดี, 8230เอสดี, BVB-8207SD support displacement.
2. SD local storage required? Models with suffix SD support SD card logging; models without SD only support real-time online acquisition via RS232.
3. ปริมาณช่อง: ช่องเดียว: 8200/8220/8206เอสดี; ช่องคู่: 8230เอสดี; Four channel: BVB-8207SD.
4. Integrated vs Separated probe: PVB-820, VT-8204: integrated probe; all other VB-82xx: separated BNC probe.

❗Notice

All models in this series only measure vibration severity, without spectrum / envelope demodulation, and cannot perform spectrum-based fault diagnosis.

Uniform frequency response: 10Hz–1kHz, not suitable for low-frequency large units.

VB-82xx series: portable vibration meter, NOT vibration analyzer.

ตารางเปรียบเทียบ: LUTRON VB-8200 / VB-8220 / VB-8206SD

การวางตำแหน่ง: Portable inspection vibration meters of LUTRON VB-82xx series. No spectrum analysis, vibration severity measurement only. Uniform frequency response: 10Hz～1kHz. Supplied with VB-83 separated piezoelectric probe + magnetic base, BNC interface.

หมายเหตุเพิ่มเติม

1. All three models cannot perform spectrum analysis or envelope demodulation. They only read vibration magnitude and cannot distinguish unbalance, misalignment or bearing faults. Professional vibration analyzer is required for further diagnosis once vibration exceeds limit.
2. VB-83 probe is interchangeable among the three main units, magnetic base compatible.
3. แหล่งจ่ายไฟ: All use 9V PP3 battery.