Siemens PXC16.2-E-A Digital Controller

รายละเอียดรหัสรุ่น

รุ่นอย่างเป็นทางการ: PXC16.2-E.A (PXC16.2-E-A is the common industry notation)

พีเอ็กซ์ซี: APOGEE Compact Series DDC (Direct Digital Controller) สำหรับ ระบบอัตโนมัติในอาคาร

16: ทั้งหมด 16 integrated I/O points onboard

.2: Second-generation hardware revision

อี: BACnet/IP Ethernet Automation Level Network (ALN) (10/100M Ethernet)

ก: Standard temperature variant (non-rooftop extended temperature model)

Reference for model differentiation:

PXC16.2-P.A: RS485 BACnet MS/TP version

PXC16.2-EF.A: Ethernet with FLN field bus support (requires license)

PXC16.2-EF32.A: Ethernet with FLN bus, รองรับได้ถึง 32 FLN devices

2. I/O Point Definition (TX-I/O™ Software Configurable)

ทั้งหมด: 16 integrated I/O points with adaptive signal configuration

✅ Supported sensors: 1k Nickel, 1k Platinum, 10K/100K NTC thermistors, 0–10V, 4–20mA transmitters

3. ฮาร์ดแวร์หลัก & ข้อมูลจำเพาะทางไฟฟ้า
4. พาวเวอร์ซัพพลาย: เอซี 24V, power consumption ≈18 VA
5. โปรเซสเซอร์: MPC852T, 100 MHz clock speed
6. หน่วยความจำ: 16MB for program & data storage; built-in lithium backup RTC clock (typical service life: 10 ปี)
7. AD/DA Conversion: 16-bit ADC sampling, 10-bit DAC output
8. การติดตั้ง: DIN rail mounting or direct screw mounting; pluggable terminal blocks
9. น้ำหนัก: ประมาณ. 0.91 กก
10. สภาพแวดล้อม

อุณหภูมิในการทำงาน: 0 ℃~ +50 ℃ (Standard Type A)

Condensation, heavy dust and strong electromagnetic interference are prohibited

8. การรับรอง: BTL certified, BACnet B-BC profile compliant
9. อินเทอร์เฟซการสื่อสาร
10. อีเทอร์เน็ต (Primary ALN): BACnet/IP, 10/100Base-TX
11. Local Commissioning Ports

USB-B device port (การว่าจ้าง, program download/upload)

RS232 HMI port for direct laptop connection

3. FLN Bus: No onboard hardware FLN interface; select EF/EF32 variants if external field sensor modules are required
4. ซอฟต์แวร์ & Programming Ecosystem (Critical Note)

Belongs to APOGEE Insight Building Management System

Programming Language: PPCL (APOGEE Proprietary Control Language)

Commissioning Tools:

Insight (Supervision + programming integrated platform)

กะรัต (Controller Tool, standalone commissioning software)

⚠️ Important Distinction: Incompatible with new-generation Desigo ABT Site software. ABT Site is designed exclusively for Desigo PXC4/PXC5/PXC7 and cannot be used for legacy APOGEE PXC Compact controllers.

6. สถานการณ์การใช้งานทั่วไป

หน่วยจัดการอากาศ (เอเอชยู), Primary Air Units (PAU), chiller auxiliary control, heat exchanger stations, small plant rooms, packaged air handlers, fan coil group control. Ideal for independent DDC control of medium & small HVAC equipment.

7. วงจรชีวิตผลิตภัณฑ์ & ตัวเลือกการทดแทน
8. สถานะ: APOGEE PXC Compact series Obsolete (ยกเลิก). Only stock / second-hand units available; no official hardware upgrade variants released by ซีเมนส์.
9. No direct cross-compatibility between old and new platforms (Incompatible programming software, control logic and program migration)

Recommended New Generation Replacement (Desigo Platform)

Desigo PXC4.E16: 16-point Ethernet BACnet/IP DDC, mainstream modern controller, programmed via ABT Site

บันทึก: Similar I/O count, but all control programs must be rewritten; PPCL programs cannot be migrated directly.

8. Common Pitfalls & แนวทางการคัดเลือก
9. Do not confuse PXC16.2-E.A (อีเทอร์เน็ต) vs PXC16.2-P.A (485 MS/TP); hardware communication circuits are incompatible.
10. This model has no native FLN bus interface. Select EF32 variant if TX-I/O field expansion modules are required.
11. Expired backup battery only causes real-time clock loss; stored control programs remain intact.
12. DO relay contacts cannot drive high-power contactors directly; interposing relays are mandatory.
13. When wiring 4–20mA transmitters to universal points, verify external power supply configuration to avoid channel burnout.

Supplementary ④: รหัสข้อผิดพลาด, สาเหตุที่แท้จริง & On-site Troubleshooting for Siemens PXC16.2-E-A

4.1 System Fault Code Table (Common to all PXC16 firmware revisions)

4.2 High-Frequency On-site Troubleshooting Procedures

1. Controller fails to power up, all indicators off
2. Disconnect all external wiring, power the controller standalone to distinguish load short circuit or internal hardware failure
3. Confirm supply voltage is AC24V. ดีซี24วี / AC220V will cause permanent damage
4. No reverse-polarity protection for power terminals L/N. Avoid reversed wiring.
5. Program download failure
6. สายสื่อสาร: Crossed RS232 commissioning cable required
7. CT tool communication parameters: 9600 baud, 8N1, ไม่มีความเท่าเทียมกัน
8. Close other serial port software occupying COM port; prioritize FTDI USB-to-serial adapters for industrial PCs
9. Firmware version must match program; mismatched firmware leads to download interruption
10. No actuation from output points
11. Distinguish between software interlock / manual-auto mode / hardware circuit fault
12. DO channels provide dry contacts only; external power supply is required for load circuit
13. AO analog outputs require load impedance above minimum specification to prevent signal collapse

4.3 Strict Installation & Commissioning Prohibitions

1. ❌ Never route AC220V cables to controller I/O terminals; immediate channel burnout
2. ❌ Run power cables and sensor wiring within the same cable tray; causes interference and signal drift
3. ❌ Omit LON bus terminating resistors; leads to intermittent communication loss
4. ❌ Missing cabinet protective earthing; static electricity triggers random controller resets
5. ❌ Hot-plug I/O wiring frequently; risk of buffer chip breakdown

4.4 คำแนะนำในการบำรุงรักษา

1. Annual inspection: แรงดันไฟฟ้า, ความหนาแน่นของเทอร์มินัล, cabinet temperature & ความชื้น, LON wiring
2. Back up PXC program files (.pxc) regularly for critical projects; source code cannot be recovered once hardware fails due to product obsolescence
3. รุ่นนี้เลิกผลิตแล้ว; full unit replacement is preferred upon hardware failure. No spare parts available for component-level repair.

Typical Application Cases of Siemens PXC16.2-E-A (APOGEE Insight System, BACnet/IP Ethernet Model)

การวางตำแหน่งแกนกลาง: 16-point compact DDC for independent control of single medium/small HVAC equipment. อีเธอร์เน็ตในตัว, suitable for distributed plant room layout and standalone control cabinets. No native FLN bus, not recommended for large numbers of external P1 field devices.

Precondition for selection: Total I/O ≤16 points, standalone equipment control, access to building LAN via BACnet/IP. Upgrade to PXC24.2 / PXC36 for higher point count requirements.

กรณี 1: Primary Air Unit (PAU) on Typical Office Floors (แอปพลิเคชันที่พบบ่อยที่สุด)

Project Overview

Grade A office building, each floor equipped with one Primary Air Unit (PAU), ทั้งหมด 22 หน่วย. Building Automation System adopts Siemens APOGEE Insight. PXC16.2-E-A deployed for each air handling unit for independent control.

I/O Allocation (Fully utilizing native 16-point TX-I/O)

DI Digital Inputs

1. Supply fan run status feedback
2. Supply fan fault alarm
3. Filter differential pressure alarm

UI Universal Inputs

1. Outdoor air temperature
2. Supply air temperature
3. Supply air humidity

U Universal Configurable Points

1. Return air CO₂ concentration
2. Freeze protection switch signal

AOV Analog Outputs

1. Chilled water control valve
2. Hot water control valve
3. Fresh air damper actuator

DO Digital Outputs

1. Supply fan start/stop control
2. Unit freeze protection alarm output
3. Electric preheat contactor control

ฟังก์ชั่นการควบคุม

1. PID constant supply air temperature control; fresh air damper modulated in response to CO₂ concentration
2. Seasonal mode switching: cooling via chilled water in summer, เครื่องทำความร้อน & humidification via hot water in winter
3. Freeze protection interlock: close fresh air damper, fully open hot water valve at low temperature
4. Scheduled start/stop, fault alarm upload, historical data logging
5. Uinterrupted standalone operation after power recovery; independent of upper workstation

Selection Justification

Point count matches compact PAU without additional expansion modules

Native Ethernet for direct connection to building switch, สายไฟง่ายๆ

No FLN device required; EF variant unnecessary

Limitation Reminder

Additional humidifier or VFD feedback signals will exceed available points. Upgrade to PXC24.2 for future expansion.

กรณี 2: Exhaust Fan / Car Park Induced Ventilation Control for Shopping Mall

Project Overview

Underground parking of shopping complex, divided into multiple ventilation zones. Each zone ventilation package controlled by one PXC16.2-E-A.

Control Logic

Fan start/stop & speed modulation linked to car park CO concentration; full exhaust damper opening triggered by fire alarm signal; fan fault monitoring, hand-auto switchover.

Brief I/O List

จาก: Fan status, ความผิดพลาด, fire dry contact signal, CO detector

ทำ: Fan contactor, audible/visual alarm

ถึง: Fan VFD signal, exhaust air damper

ข้อดี

Distributed equipment rooms in parking area simplify Ethernet networking; compact DDC delivers cost-effective solution for low-point-count zone ventilation.

กรณี 3: Small Air Handling Unit (เอเอชยู) for Outpatient Departments in Hospital

Project Overview

Small purification AHU for consultation rooms in Grade 2 โรงพยาบาล, requiring precise temperature & humidity control for basic medical ventilation.

Special Control Requirements

1. Constant supply air temperature & humidity PID regulation
2. Filter differential pressure alarm for maintenance reminder
3. Hardwired interlock with fire alarm system; unit shutdown upon fire signal
4. Continuous long-term stable operation

Selection Highlights

APOGEE PXC series widely deployed in healthcare projects for proven reliability. PXC16.2-E-A Ethernet interface supports seamless integration into hospital BMS intranet.

⚠️ Operating rooms, ICUs and high-grade purification air handlers require more control points; PXC36 is recommended instead of PXC16.

กรณี 4: Secondary Side Plate Heat Exchanger Control for Industrial Park Heat Station

Project Overview

Small heat substation in industrial park, monitoring and regulation of single plate heat exchanger.

การกำหนดค่า I/O

จาก: Circulation pump run status, pump fault

UI: Primary supply/return water temperature, secondary supply/return water temperature

ถึง: Primary side heating water control valve

ทำ: Circulation pump start/stop, over-temperature alarm

Control Strategy

PID regulation to maintain constant secondary supply water temperature; low-temperature freeze interlock; time-based heating setpoint adjustment.

Application Boundary

Only applicable to single heat exchanger + single circulation pump small heat station. Select PXC36 for multi-unit large heat stations.

กรณี 5: Combined Air Handler + Public Lighting Integrated Control for Hotel Back-of-House

Project Overview

Budget hotel service plant room. One PXC16.2-E-A controls small AHU together with corridor public lighting.

Hybrid Control Functions

1. Supply air temperature control for air handling unit
2. Scheduled automatic switching of public lighting, linkage with motion sensors
3. Unified fault alarm upload for all equipment

บันทึก

Reserve 2~3 spare I/O points for renovation when mixing HVAC and lighting control.

❌ Unsuitable Scenarios for PXC16.2-E-A (Selection Avoidance Guide)

1. Large quantity of external P1 FLN sensors/actuators required → select PXC16.2-EF-A with FLN license
2. AHU equipped with VFD, humidifier, reheat coil and multiple dampers; total I/O 16 points → PXC24.2 / PXC36
3. Outdoor rooftop installation requiring extended temperature range → select dedicated rooftop variant
4. Massive remote I/O expansion required; no native TX-I/O expansion bus onboard

✅ General Project Implementation Experience (Applicable to All Cases)

1. สถาปัตยกรรมเครือข่าย: PXC16.2-E-A → LAN Switch → Insight Server (BACnet/IP)
2. การว่าจ้าง: Program download via RS232 local connection using CT tool
3. Spare Parts Note: รุ่นนี้เลิกผลิตแล้ว. New construction projects prefer Desigo series. Renovation & maintenance projects may source surplus/second-hand stock.
4. Program Migration: Legacy PXC PPCL programs cannot be imported directly to new Desigo controllers; full control logic rewriting is mandatory.