ألين برادلي 2080-LC20-20QBB وحدة تحكم منطقية قابلة للبرمجة

Catalog Code Breakdown

Native I/O Allocation (20 Points)

Inputs: 12-point DC24V Digital Inputs

Terminals I-00~I-11, sinking/sourcing compatible (شكلي)

النواتج: 8-point DC24V NPN Transistor Outputs

Terminals O-00~O-07, NPN transistor type. AC loads cannot be driven directly.

⚠️ Distinction:

2080-LC20-20QBB = NPN transistor output

2080-LC20-20QBBR = Relay output version

المواصفات الفنية الرئيسية

1. مزود الطاقة: 24 VDC (operating range:18~30 VDC)
2. ذاكرة البرنامج: 10K instructions
3. Variable Memory: 10K bytes
4. واجهات الاتصالات

USB (programming port)

Embedded RS485 (Modbus RTU Master/Slave)

5. القدرة على التوسع

✅ Supports Micro800 plug-in modules (analog I/O, RTD/TC, high-speed counter, serial modules)

✅ Maximum 4 plug-in modules can be installed

6. وظائف عالية السرعة

4-channel High-Speed Counter (HSC), الأعلى. 100كيلو هرتز

4-channel Pulse Train Output (PTO), الأعلى. 100kHz for basic positioning control

7. التقييمات البيئية

درجة حرارة التشغيل: 0 ~ 55 درجه مئوية

درجة حرارة التخزين: -40 ~ 85 درجه مئوية

فئة الحماية: IP20, cabinet mounting only

Software Requirement

برامج البرمجة: Connected Components Workbench (CCW)

Minimum supported version: CCW V8.0 and above

التطبيقات النموذجية

Small conveying equipment, آلات التعبئة والتغليف, معجب & التحكم في المضخة, custom automated tooling, HVAC control, basic stepper/servo positioning systems.

إرشادات الاختيار & Common Pitfalls

1. NPN sinking transistor output: Load negative wire connects to PLC output terminal; AC loads cannot be driven directly. Use DC24V solenoid valves preferentially.
2. No built-in Ethernet port! Ethernet communication requires additional Ethernet plug-in module (على سبيل المثال. 2080-EWEB).
3. Freewheeling diodes are recommended for inductive loads to avoid transistor breakdown caused by back EMF.
4. Micro820 does not support remote I/O, only local plug-in expansion available.

Direct Replacements & مقارنة السلسلة

Same I/O count relay variant: 2080-LC20-20QBBR

Higher I/O capacity: Upgrade to Micro830 (2080-LC30 series)

Complete Reference for 2080-LC20-20QBB

(Terminal Wiring + Modbus RTU Configuration + PTO Program + استكشاف الأخطاء وإصلاحها + رمز النظام المنسق)

1. Hardware Terminal Definition & دليل الأسلاك

نموذج: Micro820 2080-LC20-20QBB

مزود الطاقة: تيار مستمر 24 فولت; من:12-channel DC24V; يفعل:8-channel NPN Sinking Transistor Output

⚠️ Embedded serial port: Shared RS485/RS232 without galvanic isolation

1.1 محطات الطاقة (PLC Main Power)

1.2 Digital Input Terminals (12 من: أنا-00 ~ I-11)

محطة مشتركة: CM0

Sinking Wiring (الأكثر شيوعًا): CM0 connected to DC24V+; NPN sensor output to I-xx; sensor negative to 0V

Sourcing Wiring: CM0 connected to 0V; PNP sensor output to I-xx; sensor positive to DC24V

أنا-00, أنا-01, أنا-02, أنا-03: Dedicated high-speed counter channels

DI Terminal List:

أنا-00, أنا-01, أنا-02, أنا-03, أنا-04, أنا-05, أنا-06, أنا-07, أنا-08, أنا-09, I-10, I-11

1.3 Digital Output Terminals (8 DO O-00 ~ O-07, نبن)

محطة مشتركة: -CM0

✅ NPN Sinking characteristic: Terminal O-xx approximates 0V when energized

Standard Wiring Scheme:

+DC24V → Load positive terminal; Load negative terminal → O-xx; All -CM0 terminals tied to DC24V 0V

يا-00, يا-01: PTO pulse output channels (عالية السرعة)

Freewheeling diode must be reverse-paralleled for inductive loads (صمامات الملف اللولبي)

DO Terminal List: يا-00, يا-01, يا-02, يا-03, يا-04, يا-05, يا-06, يا-07

1.4 Embedded RS485/RS232 Serial Terminal (6-pin terminal block)

RS485 Wiring: Pin7(ب) ↔ Device B terminal; Pin8(أ) ↔ Device A terminal; Pin6 shared ground

❗ No galvanic isolation on this port. Install isolated repeater for long-distance communication.

2. Step-by-step CCW Modbus RTU Configuration (Master/Slave Supported)

برمجة: Connected Components Workbench CCW V8.0 and above

Step1: Project Hardware Configuration

1. Create new project → Select controller 2080-LC20-20QBB
2. Double-click [المراقب المالي] on left pane to open configuration page → Locate [Serial Port]
3. Driver selection: مودبوس ار تي يو

Step2: معلمات الاتصال (Recommended Defaults)

Step3: Register Mapping (Critical Section)

Modbus address mapping rule for Micro820

Coils (0x addresses): PLC BOOL variables

Discrete Inputs (1x addresses): Read-only BOOL status

Holding Registers (4x addresses): INT/DINT (Read & Write, الأكثر استخداما على نطاق واسع)

Input Registers (3x addresses): Read-only INT values

ملاحظة هامة: Micro800 series does not support automatic tag mapping for Modbus. Use function blocks for master read/write operations:

`MODBUS_READ` / `MODBUS_WRITE`

3. PTO Pulse Positioning Control (O0/O1 Pulse Output for Stepper/Servo)

Hardware Channel Assignment

PTO0: Pulse Output → O-00; Direction signal recommended on O-02

PTO1: Pulse Output → O-01; Direction signal recommended on O-03

Max output frequency: 100كيلو هرتز

Output type is NPN sinking. Servo drive pulse input setting must be low-level active / sinking input

CCW Configuration Workflow

1. Controller Configuration → Enable [إخراج النبض (PTO0)]
2. Set maximum frequency: 100000 هرتز; Acceleration/Deceleration time: 500آنسة
3. Call motion function block `PTO_RUN` inside program

Structured Text Example: Relative Positioning

⚠️ Critical Limitation: Micro820 does not support electronic cam or multi-axis synchronization; only basic point-to-point positioning available.

4. عداد عالي السرعة (HSC) إعدادات (I0~I3)

4 independent HSC channels, support single-phase input & quadrature encoder with 4x multiplication

Common operation modes:

Mode0: Single-phase up-counting

Mode4: Quadrature encoder, 4x frequency multiplication mode

5. الأسلاك & Selection Hard Rules (Risk Avoidance)
6. 2080-LC20-20QBB = NPN sinking output. AC loads cannot be driven directly. Add intermediate relays for AC loads.
7. Do not overload transistor outputs continuously: 0.3A per point maximum (ambient temperature 55℃)
8. RS485 port non-isolated. Communication errors easily occur under multi-ground power supply systems; implement shared ground or galvanic isolation.
9. No native Ethernet port. Install plug-in module 2080-EWEB if Ethernet connection is required.
10. Maximum 4 plug-in modules supported. Remote I/O expansion is not available.
11. Use shielded cables for pulse wiring; route away from power cables of contactors and inverters to reduce interference.
12. HS Code Reference for Import & Export Customs Declaration

8537101100

وصف: وحدة تحكم منطقية قابلة للبرمجة (بلك)

⚠️ Reference only. Confirm classification with local customs authority before formal customs clearance.

7. Common Fault Troubleshooting Matrix

8. Official Manual Reference

دليل المستخدم: 2080-UM005E-EN-E (Micro820 Controller User Manual)

Allen‑Bradley 2080-LC20-20QBB (Micro820) Programmable Controller Overview

1. تحديد موضع المنتج

2080-LC20-20QBB is an Allen‑Bradley Micro820 compact integrated PLC manufactured by Rockwell Automation. Designed for standalone OEM machinery and small complete automation systems. It replaces conventional control circuits built with massive intermediate relays. Equipped with integrated digital & analog I/O and multiple communication ports, DIN rail mountable. Target market: مدمج, low-cost standalone automation solutions.

Catalog Summary

2080: Micro800 series identifier

LC20: Micro820 controller platform

20: 20 native I/O points

س: 24V DC sourcing (بنب) digital output

BB: Onboard 4 المدخلات التناظرية +1 الإخراج التناظري, PTO pulse output, embedded Ethernet

2. Native Hardware I/O Specifications
3. المدخلات الرقمية:12-نقطة DC24V (configurable sinking/sourcing)

Signal acquisition: Photoelectric sensors, proximity switches, limit switches, start/stop pushbuttons, توقف الطوارئ, door interlock switches

2. المخرجات الرقمية:7-point DC24V PNP sourcing output

Drive small solenoid valves, indicator lamps, المرحلات المتوسطة (على سبيل المثال. MY2N-GS), لفائف المقاولين

3. Integrated Analog Channels (Core Advantage)

4 المدخلات التناظرية: 0~10 فولت, 0~20 مللي أمبير, thermistor temperature acquisition supported

1 الإخراج التناظري: 0~10 فولت / 0~20 مللي أمبير, used for inverter speed regulation and modulating valve control

4. Motion Control Functions

مدمج 1 channel PTO/PWM pulse output, capable of driving stepper motor controllers for basic point positioning

5. قدرة التوسع: 2 plug-in slots for high-speed counters, serial ports and additional I/O modules
6. الوظائف الأساسية

3.1 Discrete Logic Control (الوظيفة الأساسية)

Based on signals from sensors and operation buttons, execute programmed sequence, interlock, mutual lock and start-stop logic:

Sequential start/stop of conveyors, automatic cylinder cycling, automatic machine workflows, safety loop judgment and fault alarm output.

Can be paired with MY2N-GS intermediate relays to drive high-power loads indirectly.

3.2 Analog Process Control (Advantage of Onboard Analog Channels)

Collect temperature, ضغط, liquid level and flow signals from transducers

Built-in PID function: Constant temperature control, إمدادات المياه الضغط المستمر, air volume regulation; Analog output to adjust inverter speed and proportional valves.

3.3 High-speed Signal Processing

High-speed counters read encoder pulses (سرعة & position measurement); PTO pulses implement basic stepper positioning.

3.4 Communication Networking

1. EtherNet/IP Ethernet Port

Connect HMI touchscreens, SCADA host computers and other Rockwell PLCs for remote monitoring, parameter access and program upload/download.

2. RS232/RS485 (Non-isolated Serial Port)

Modbus RTU Master/Slave interface to connect inverters, instruments and third-party sensors.

3. USB Programming Port: Direct connection to PC for program download and online debugging.

3.5 Data Storage, Recipe & Log Management

Embedded RTC real-time clock: Timed tasks, timestamp for fault logging

MicroSD card slot: Store production recipes, runtime logs, سجلات خطأ; support program backup & one-click restore.

3.6 HMI Expansion

Supports external remote text display 2080‑REMLCD, enabling parameter modification and alarm display without additional touchscreen panels.

4. Typical Industries & معدات
5. ماكينات التعبئة والتغليف: Small sealers, ملصقات, آلات التعبئة, miniature sorting conveyor systems
6. التدفئة والتهوية وتكييف الهواء & معالجة المياه: Small pump stations, air handling units, constant temperature water tanks, chemical dosing systems
7. Food Machinery & Central Kitchen Equipment: Washing lines, material conveyors, temperature-controlled ovens, smoke exhaust control systems
8. Custom Automation: Assembly tooling, test benches, small transfer equipment
9. Auxiliary control for machine tools, material conveying lines
10. Laboratory equipment, small constant-temperature aging equipment
11. برامج البرمجة

برامج البرمجة: Connected Components Workbench (CCW)

Supported languages: Ladder Diagram (إل دي), Function Block Diagram (FBD), Structured Text (شارع), compliant with IEC61131‑3

6. Application Boundaries

✅ Suitable for: Standalone machines with limited I/O, analog acquisition/PID demand, Ethernet networking requirement, cost-sensitive OEM equipment

❌ Not suitable for: Multi-axis servo synchronization, large-scale distributed production lines, massive remote I/O, high safety-level safety circuits (install dedicated safety relays such as G9SX for safety functions)

Supplement Remarks

1. Terminology strictly follows Rockwell Automation official datasheet standards, suitable for export tender documents, equipment manuals and overseas product catalogs;
2. Consistent industrial automation vocabulary matching international engineering conventions;
3. If you need Russian translation or condensed datasheet version, I can process further.