النموذج الكامل: EMG 17-REL/KSR-24/21-21-LC
✅ Basic Information
رقم الجزء: 2940391
نوع المنتج: DIN-rail mounted electromagnetic relay module (built-in miniature relay soldered, relay core non-removable)
مسلسل: EMG 17-REL
أصل: ألمانيا
رمز النظام المنسق: 85364190
اتصال: Screw terminal M3
أبعاد: 17.5(دبليو) ×75(ح) ×62.5(د) مم
التعبئة والتغليف: 10 pcs per box, minimum order 1 جهاز كمبيوتر
⚙️ Core Electrical Parameters
Coil Supply: 24V AC/DC universal, typical current 18mA, power consumption 0.43W
تكوين الاتصال: 2 changeover contacts DPDT (2ج)
مواد الاتصال: AgNi silver nickel, suitable for medium-load applications
Rated Continuous Current: 5أ; maximum inrush switching current 6A
الحد الأقصى لجهد التبديل: 250الخامس التيار المتناوب/تيار مستمر
الحياة الميكانيكية: تقريبا. 5×10⁷ operations
درجة حرارة التشغيل: -20درجه مئوية ~ +40 درجه مئوية; درجة حرارة التخزين: -20درجه مئوية ~ +70 درجه مئوية
عزل: Basic isolation between input and output, with status LED and surge suppression circuit
Wiring Cross-section: 0.2–4mm² solid wire / 0.2–2.5mm² flexible wire
📌 Terminal Definition
A1/A2: إمدادات الطاقة لفائف (24الخامس التيار المتناوب/تيار مستمر)
11, 12, 14: 1st changeover contact
21, 22, 24: 2nd changeover contact
📋 سيناريوهات التطبيق
PLC/controller signal isolation, low-side control of high-power loads, صمامات الملف اللولبي, contactors and indicator light circuits.
ميزة: Integrated soldered construction, relay core cannot be replaced separately; interchangeable pluggable models belong to the RIF series.
🔁 Alternative Reference (Compatible Equivalents)
Same brand alternative: RIF-1-RSC-24DC/2X21 (pluggable relay core, easier maintenance, same width 17.5mm)
البديل المحلي: 17.5mm width relay module, 24الخامس التيار المتناوب/تيار مستمر, 2 اتصالات التحول, screw terminal type
📎 Certifications
cULus, مجموعة شرق أفريقيا, م; متوافق مع EN 61810-1, EN50178
Full List of اتصال فينيكس EMG-REL Relay Modules
ملحوظة: EMG-REL includes 3 sub-width series: EMG10-REL (10مم), EMG17-REL (17.5مم, السائدة), EMG22-REL (22.5مم). All adopt soldered built-in relays (non-removable relay core), screw terminals and DIN rail mounting.
KSR = standard monostable electromagnetic relay; SG = latching relay; G = DC-only coil; W = AC-only coil; LC = LED indicator + surge suppression circuit
- EMG 17-REL / 17.5مم (الأكثر شيوعًا, مشتمل 2940391)
| رقم الجزء. | النموذج الكامل | الجهد لفائف | Contact Spec | ملاحظات |
| 2940391 | EMG 17‑REL/KSR‑24/21‑21‑LC | 24الخامس التيار المتناوب/تيار مستمر | 2 التحول (2ج) | ✅ Item you enquired, AgNi, مع الصمام & suppression circuit |
| 2940430 | EMG 17‑REL/KSR‑W230/21‑21‑LC | 230الخامس و | 2 التحول (2ج) | AC-only version, dual contacts |
| 2953854 | EMG 17‑REL/KSR‑24/21 | 24الخامس التيار المتناوب/تيار مستمر | 1 التحول (1ج) | Single changeover, simplified version without LC |
| 2947420 | EMG 17‑REL/KSR‑12/21 | 12الخامس التيار المتناوب/تيار مستمر | 1 التحول (1ج) | 12V universal model |
| 2947653 | EMG 17‑REL/KSR‑230/21 | 230الخامس التيار المتناوب/تيار مستمر | 1 التحول (1ج) | 230V universal, dual A2 terminal |
| 2946353 | EMG 17‑REL/KSR‑230/21/SO54 | 230الخامس التيار المتناوب/تيار مستمر | 1 التحول (1ج) | SO54 special contact configuration, reinforced insulation |
| 2949994 | EMG 17‑REL/KSR‑G24/SO38 BK | 24في العاصمة | 1 مفتوحة عادة (لا) | Black housing, AgSnO₂, 80A inrush withstand, dedicated for lamp loads |
| 2946654 | EMG 17‑REL/SG‑B48/21/P | 48في العاصمة | 1 التحول (1ج) | SG latching relay, with forward diode circuit |
- EMG 10-REL / 10mm Narrow Version (Cabinet Space Saving)
| رقم الجزء. | النموذج الكامل | الجهد لفائف | Contact Spec | ملاحظات |
| 2942108 | EMG 10‑REL/KSR‑G24/1‑LC | 24في العاصمة | 1 مفتوحة عادة (لا) | مع الصمام, AgNi for standard loads |
| 2941400 | EMG 10‑REL/KSR‑G60/1‑LC AU | 60في العاصمة | 1 مفتوحة عادة (لا) | AU gold-plated contacts, for low-current weak signals |
- EMG 22-REL / 22.5mm Wide Version (High Isolation / Built-in Transistor Drive)
| رقم الجزء. | النموذج الكامل | الجهد لفائف | Contact Spec | ملاحظات |
| 2951885 | EMG 22‑REL/KSR‑24/21 | 24الخامس التيار المتناوب/تيار مستمر | 1 التحول (1ج) | عزلة عالية, 5kV dielectric strength, الغرض العام |
| 2952350 | EMG 22‑REL/KSR‑G24/TRN35 | 24في العاصمة | 1 التحول (1ج) | Built-in NPN transistor, direct drive by low-current PLC outputs, hybrid relay |
- Suffix Explanation for Model Selection
KSR: Standard monostable electromagnetic relay
SG: Latching relay (remains state after power loss)
ز: DC-only coil
دبليو: AC-only coil
إل سي: Integrated LED status indicator + coil surge suppression circuit (الصمام الثنائي الحر / مكثف)
/21: 1 الاتصال التحول (1ج: 11/12/14)
/21-21: 2 اتصالات التحول (2ج: 11-12-14 & 21-22-24)
SO38 / SO54: Special contact material (AgSnO₂, suitable for lamp loads and high inrush current)
AU: Gold-plated contacts, weak signal and low-level circuits
TRN35: Built-in NPN pre-drive transistor
- Key Distinction (Avoid Confusion with RIF Series)
EMG-REL: Relay soldered to base, non-replaceable relay core, cost-effective for fixed installation
RIF-REL / RIF-1: Plug-in replaceable relay core, separate base and relay, easier maintenance, same width for replacement
Application Fields of Phoenix Contact EMG-REL Relay Modules
تحديد المواقع: Isolation relay for PLC / controller digital interfaces. Soldered integrated DIN-rail modules. Core functions: low-voltage signal isolation, تضخيم الإشارة, level conversion, driving contactors, valves and indicator loads. Special variants (AU gold-plated, SO38 high-inrush, SG latching, TRN built-in transistor) for differentiated working conditions.
- الأتمتة الصناعية العامة (الأكثر شيوعًا, مشتمل 2940391)
أدوات الآلة, معدات التعبئة والتغليف, خطوط الناقل, آلات صب الحقن, woodworking machinery and custom automation control cabinets
Isolation for PLC DO channels: PLC 24V DC outputs driving contactors, صمامات الملف اللولبي, indicator lights and sound-light alarms
Door interlock, status feedback, fault alarm circuits, auxiliary start-stop control
ميزة: LC versions with LED and suppression circuit suppress reverse EMF and protect PLC modules
- أتمتة البناء / التدفئة والتهوية وتكييف الهواء
Air handling units, fresh air systems, fan coil units, air dampers and water valve actuator control
دوائر الإضاءة, مراوح العادم, مضخات المياه, BA system signal interfaces
230V AC coil variants directly work with mains circuits; narrow EMG10-REL saves cabinet space
- معالجة المياه & Municipal Water Supply / الصرف الصحي
Clean water tanks, sewage pump stations, chemical dosing systems, bar screens, valve actuation and liquid level alarm signal isolation
Stable screw wiring suitable for long continuous operation in humid cabinet environments
- الطاقة المتجددة (الكهروضوئية, تخزين الطاقة, طاقة الرياح)
Inverter cabinets, صناديق الموحد, auxiliary control for box-type transformers, fault alarm and status dry contact upload
Signal isolation to prevent strong electrical interference to acquisition boards; for onshore power stations (No ATEX certification, RIF explosion-proof series for hazardous areas)
- الفرز اللوجستي & أتمتة المستودعات
Sorters, الناقلات الدوارة, المعبئين, AGV control cabinets, high-frequency switching signals, brake control and solenoid valves for sorting chutes
حياة ميكانيكية عالية (up to 5×10⁷ operations) for frequent switching cycles
- بنية تحتية: Tunnel & Road Lighting, Pump Stations
التحكم في الإضاءة (SO38 models with AgSnO₂ contacts withstand high inrush current from incandescent and LED lamps, up to 80A inrush)
Remote start-stop control of fans and drainage pumps
- معدات الاختبار, الأجهزة & المعدات الطبية
AU gold-plated variants: Low contact resistance for mA-level weak signal switching, sensor signal switching and test fixtures; not suitable for high-power loads, gold layer may be damaged by arcing
- تطبيقات أخرى
Control cabinet signal transfer, relay logic expansion, remote IO isolation, auxiliary dry contacts for fire alarm linkage
SG latching variants: retain switching state after power loss for state memory applications
✅ Selection Guide by Suffix
KSR standard type: General solenoid valves, المقاولين, أضواء المؤشر (90% common applications, على سبيل المثال. 2940391)
SO38 BK: Lamp loads, capacitive loads, تيار التدفق العالي
AU gold-plated: Weak signal, instrument and low-current test circuits
SG latching: State retention after power failure
TRN35 built-in transistor: Direct drive by low-current PLC outputs without external pre-resistor
⚠️ Not Suitable Applications
EMG-REL complies with Class A EMC standards, not designed for consumer electronics. It does not have forcibly guided contacts, cannot be used for PLd / PLe safety circuits (safety relays with forcibly guided contacts required). No ATEX certification, not permitted in explosive hazardous areas.
Working Principle of Phoenix Contact EMG-REL Relay Modules
EMG-REL is an integrated electromagnetic relay module. قاعدة, التتابع الكهرومغناطيسي, LED indicator and suppression components are assembled in one DIN-rail housing. The relay core is permanently soldered and non-pluggable. Fundamentally, it is an electromechanical contact relay for low-voltage control of high-voltage circuits, electrical isolation and signal conversion.
- Basic Electromagnetic Principle
- Coil Side (Control Terminals A1/A2)
When rated coil voltage (تيار مستمر 24 فولت / تيار متردد 24 فولت / AC230V etc.) is applied to A1 and A2, excitation current flows through the coil and generates magnetic flux on the iron core. The magnetic force overcomes spring tension and pulls the armature.
Coil energized → Armature pulls in → Contacts switch
Coil de-energized → Magnetic field disappears → Spring resets → Contacts return to original position
AC/DC universal coil versions (مثل 2940391) have coil windings designed for both AC and DC supply. Pure DC (لاحقة ز) and pure AC (suffix W) variants use different winding parameters.
- Contact Side (Load Terminals 11/12/14, 21/22/24)
Changeover contacts (1ج / 2ج) include normally closed (نورث كارولاينا) ومفتوحة عادة (لا):
حالة إلغاء تنشيط: محطة مشتركة (11) connects to NC (12) and disconnects from NO (14)
يتم تنشيط الملف: محطة مشتركة (11) disconnects from NC (12) and connects to NO (14) to activate the external load (صمامات الملف اللولبي, لفائف المقاولين, indicator lights etc.)
- Principle of Built-in Auxiliary Components (LC suffix, 2940391 is LC version)
LC = LED indicator + coil surge suppression circuit
LED status indicator: Wired parallel to the coil. Lights up when coil is powered to visually indicate drive signal presence. Integrated current-limiting resistor matched to rated voltage.
Surge suppression circuit (الصمام الثنائي الحر / مكثف):
Relay coils are inductive loads and produce high reverse EMF upon de-energization, which may damage PLC output chips.
DC coils: Usually use freewheeling diodes to dissipate inductive energy
AC coils: Use varistor or RC snubber circuits to suppress AC voltage spikes
Models without LC suffix have no indicator or suppression; external surge protection must be added.
- Differentiated Principle of Special Sub-models
- SG Latching Version (EMG…SG)
Not conventional monostable relays. Permanent magnet inside:
Forward pulse power → Contacts close and stay latched after power removal
Reverse pulse power → Contacts reset and stay open after power removal
No continuous power required to maintain state, only pulse signal for switching, انخفاض استهلاك الطاقة.
- TRN35 Built-in Transistor Version (EMG…TRN35)
NPN pre-drive transistor integrated before coil: Low-current PLC signal drives the transistor first, then the transistor energizes the relay coil. Suitable for PLC channels with weak drive capacity.
- AU Gold-plated Contact Version
Gold plating on contact surface reduces contact resistance for mA-level weak signal switching. Not for heavy loads; gold plating is vulnerable to arc damage under high current.
- SO38 (AgSnO₂ Contacts)
Tin oxide silver contact material, arc-resistant and withstands high inrush surges, dedicated for lamp and capacitive loads to prevent contact welding.
- Electrical Isolation Logic
Basic insulation separates the coil control circuit and load contact circuit. It isolates PLC low-voltage side from high-voltage load side, blocks common-mode interference and prevents load-side faults from propagating into controller IO boards.
⚠️ هام: This is only functional isolation. It is not a safety relay with forcibly guided contacts and cannot be used for PLe / PLd safety circuits.
- Simplified Working Flow (2940391, EMG17-REL/KSR-24/21-21-LC)
PLC digital output → 24V AC/DC supplied to A1/A2 → LED on, coil energized → Magnetic field pulls armature → Two changeover contacts switch synchronously → Solenoid valve / contactor energized
PLC output off → Coil de-energized → Suppression circuit dissipates residual coil energy → Spring resets contacts → Load de-energized
المقاولين,قاطع الدائرة,الاستشعار,التشفير,بلك,محول



















NH42-63-318x560.png)



