DATALOGIC S65-PA-5-W09-PH Color Mark Sensor

Marke: Datalogic (Italien) | Official Part No.: 954201020

The S65-PA-5-W09-PH is an industrial contrast (color mark) fotoelektrischer Sensor of Datalogic S65-W Series. It features a compact standard 50×50 mm square housing and a broad-spectrum white LED emitter, which accurately detects brightness differences between colored/grayscale labels and substrates.

Equipped with a 4-digit LED display and 3-button teach-in system, it allows parameter configuration and signal strength visualization without external devices. Built-in RS485 serial interface supports remote configuration and data transmission. With a maximum switching frequency of 30 kHz and response time of 16 μs, it is ideal for high-speed automated production lines. The IP67 ingress protection rating ensures reliable operation in harsh industrial environments.

Aufschlüsselung des Modellcodes

Codesegment	Beschreibung
S65	Produktserie: Universal platform for 50×50 mm square industrial photoelectric sensors, covering color mark detection, color recognition, laser ranging and other detection types
PA	Gehäuse & Optical Layout: P = ABS plastic housing; A = 90° radial light emission design
5	Elektrische Schnittstelle: M12 5-pin circular industrial connector
W09	Erkennungstyp & Optical Specification: W = White LED for contrast / Erkennung von Farbmarkierungen; 09 = Optical configuration for standard sensing range
PH	Ausgabe & Funktionskonfiguration: P = PNP-Schaltausgang; H = Integrated RS485 communication interface + output delay function

Wichtigste technische Spezifikationen

Optical Performance

Detection Principle: White light reflective contrast (color mark) detection

Emitter: Broad-spectrum white LED (Wellenlänge: 400~700 nm)

Operating Distance: 12 ~ 20 mm (Toleranz: ±2 mm)

Spot Size: 3×1 mm @ 19 mm nominal sensing distance

Digital Resolution: 12 bisschen (4096 grayscale levels)

Ansprechzeit: 16 μs

Schaltfrequenz: 30 kHz

Elektrische Spezifikationen

Versorgungsspannung: 10 ~ 30 VDC

No-load Current Consumption: ≤50 mA

Ausgabetyp: PNP-Schaltausgang

Maximum Load Current: ≤100 mA

Output Saturation Voltage Drop: ≤2 VDC

Kommunikationsschnittstelle: RS485 serial interface, supporting parameter read/write and remote control

Schutzfunktionen: Kurzschlussschutz, Verpolungsschutz, surge overvoltage protection

Electrical Safety Class: Klasse 2

Mechanisch & Umgebungsparameter

Gehäusematerial: ABS engineering plastic; Lens Material: Glass

Schutz vor Eindringen: IP67 (Dust-tight and protected against temporary immersion)

Betriebstemperatur: -10 ~ +55 ℃

Lagertemperatur: -20 ~ +70 ℃

Vibrationsfestigkeit: 0.5 mm Amplitude, 10~55 Hz all axes, konform mit EN 60068-2-6

Schockfestigkeit: 30G acceleration, 11 ms pulse, all axes, konform mit EN 60068-2-27

Unit Weight: ≤60 g

Main Models in the Same Series

Full Model No.	Ausgabetyp	Schnittstellenkonfiguration	Key Functional Differences
S65-PA-5-W09-PH	PNP	M12 5-pin + RS485	White light color mark detection, with communication and delay functions
S65-PA-5-W09-NH	NPN	M12 5-pin + RS485	White light color mark detection, NPN output version
S65-PA-5-V19-PPP	3-channel PNP	M12	RGB tri-color LED, for color recognition
S65-PA-5-Z03-PPI	PNP + 4-20 mA-Analogausgang	M14	Linear reflective type, for width and edge positioning measurement

Typische Anwendungen

Packaging Lines: Color mark positioning for vertical/horizontal packaging machines, label detection for labellers, cutting synchronization for bag making machines
Drucken & Paper Industry: Registration mark recognition, paper slitting positioning, printed product quality inspection
Essen & Pharmazeutische Industrie: Film alignment for filling machines, label detection for vials, positioning for medicine plates
Elektronische Montage: Material label presence detection, conveyor synchronization, auxiliary material remaining quantity detection

Troubleshooting Matrix

Fehlerphänomen	Grundursache	Step-by-Step Solutions
Indicator off, keine Ausgabe	Abnormal power supply or incorrect wiring	1. Measure supply voltage to ensure it is within 10~30 VDC
		2. Verify M12 pin assignment and check for reverse power connection
		3. Check connector tightness and cable continuity
Missing detection / Falsche Auslösung / Unstable output	Failed calibration, offset light spot or insufficient contrast	1. Perform new teach-in calibration for background and color mark respectively
		2. Adjust mounting position to ensure the light spot fully covers the color mark
		3. Avoid direct strong ambient light; ensure target contrast ≥ 10%
Abnormal output delay	Incorrect parameter settings or disabled function	1. Enter delay setting menu via panel buttons and verify delay switch & time parameters
		2. Read configurations via RS485 bus to check for parameter tampering
		3. Restore factory settings and reconfigure delay parameters
No response on RS485 communication	Wrong wiring sequence, mismatched parameters or address conflict	1. Check A/B communication wiring for reverse connection
		2. Match baud rate, Datenbits, station address and other parameters with host system
		3. Troubleshoot address conflicts among devices on the bus

Notiz: The S65-PA-5-W09-PH is a standard 5-pin version without RS485 interface. Models with RS485 in the same series are suffixed with Z (z.B. S65-PA-5-W09-PHZ), equipped with 8-pin M12 connector. This sensor features adjustable output delay (1~100 ms), external synchronous trigger input and button lock function.

M12 5-Pin Pinout Definition

This sensor adopts IEC 61076-2-101 standard A-coded M12 5-pin connector, complying with general specifications of Datalogic S65 platform.

Pin-Nr.	Standard Wire Color	Signal Name	Funktionsbeschreibung
1	Braun (BN)	+In DC	Power positive, 10~30 VDC supply
2	Weiß (WH)	SYNC Input	External sync / remote teach input, active high (connected to +V). Supports line synchronous trigger and one-touch remote calibration
3	Blau (BU)	0V / GND	Power negative and common signal ground
4	Schwarz (BK)	OUT PNP	PNP-Schaltausgang, max. load current 100 mA with short-circuit protection
5	Grau (GY)	Shield / NC	Shield grounding terminal. Leave unconnected if shielding is not required; no analog output for this model

Wiring Notice: When viewing the connector front with the notch facing down, pins are arranged clockwise as 1→2→3→4→5. Hot plugging may damage internal circuits. Always cut off power before wiring.

Markenübergreifender Vergleich gleichwertiger Modelle

Below are mainstream color mark sensors with equivalent positioning and applications, suitable for high-speed color mark detection in packaging and printing industries.

Marke & Modell	Erfassungsabstand	Lichtquelle	Ansprechzeit	Schaltfrequenz	Ausgabetyp	Gehäusedimension	Hauptvorteile & Anwendungshinweise
Datalogic S65-PA-5-W09-PH	12~20 mm	Broad-spectrum white LED	16 μs	30 kHz	PNP	50×50 mm square	4-digit display & 3 buttons for clear parameter visualization; delay adjustable, kostengünstig
SICK KT5W-2P1116	≤10 mm	RGB tri-color LED	50 μs	10 kHz	PNP	30×53×80 mm rectangular	Auto-select optimal wavelength; reliable for low-contrast labels, fits narrow mounting space
Banner R58ECRGB1	12.7 mm (nominal)	RGB tri-color LED	15 μs	33 kHz	Universal PNP/NPN	50×50 mm square	Die-cast zinc alloy housing with superior vibration & interference resistance; simple one-touch teach-in
OMRON E3S-DCP21	10~20 mm	White LED	20 μs	25 kHz	PNP	50×50 mm square	Optimized for reflective materials such as aluminum foil and glossy film; strong ambient light resistance and excellent batch consistency

Replacement Selection Recommendations

Direct replacement with compatible mounting holes: Banner R58 series is preferred, with fully compatible 50×50 mm mounting holes and better overall performance.

High-speed production lines (Geschwindigkeit 200 m/my): Keep Datalogic S65 or Banner R58 for better adaptability to 30 kHz high switching frequency.

Low-contrast / multi-color label applications: Choose SICK KT5W or Banner RGB models for higher recognition tolerance with tri-color light source.