FESTO FENG-50-450-GF Führungszubehör für Zylinder

This is a metric guide unit manufactured by PARTY. It provides rigid guidance, torsion resistance and bearing capacity for lateral forces and torques for ISO 15552 standard cylinders (DSBC/DSBG/DNC series). It is not a cylinder itself, but a dedicated guide accessory for cylinders.

1. Modellaufschlüsselung

FENG-50-450-GF

FENG: Metric guide unit for ISO 15552 standard cylinders

50: Matched cylinder bore size: 50 mm

450: Guide stroke: 450 mm (Available range: 10–500 mm)

GF: Plain bearing guidance (low speed, high rigidity, kostengünstig). Corresponding KF stands for ball bearing guidance (hohe Geschwindigkeit, low friction).

Grundlegende Informationen

Teile-Nr.: 34483

Compatible cylinders: DSBC/DSBG/DNC-50 series standard cylinders

2. Technische Kernparameter

3. Struktur & Installationsrichtlinien
4. Funktion: Used in combination with DSBC/DNC-50 cylinders. The cylinder piston rod passes through the guide unit. The guide shaft bears lateral forces and prevents the piston rod from torsion, sagging and bending.
5. Installationsanweisungen:

Mount the cylinder and guide unit coaxially via connecting flange and coupling.

The guide unit is equipped with built-in threaded mounting holes, allowing front, side and reverse installation.

It is recommended to fit position sensors (SME/SMT) to detect stroke positions.

4. Typische Anwendungsszenarien

Pneumatic handling, push-pull mechanisms, heavy-duty pick-and-place units, end-effectors for gantry systems;

Holzbearbeitungsmaschinen, Verpackungsausrüstung, automotive production lines, machine tool loading and unloading systems.

Operating characteristics: Niedrige Geschwindigkeit, high lateral force, high rigidity, long stroke and excellent torsion resistance. GF plain bearing is preferred for better impact resistance and lower cost compared with KF ball bearing.

5. Alternative & Same-series Models

Gleichwertiger Ersatz

FENG-50-450-KF: Ball bearing type, suitable for high-speed and low-friction applications.

Same Series with Different Strokes

FENG-50-100-GF, FENG-50-200-GF, FENG-50-500-GF

FENG-50-450-GF is an ISO 15552 cylinder guide unit with 50 mm Bohrung, 450 mm long stroke and plain bearing (GF). It is designed for low speed, heavy load, large lateral force/torque, long stroke, impact resistance and dusty/harsh working conditions. It protects the piston rods of DSBC/DNC/DSBG cylinders against torsion, sagging and damage caused by lateral forces. Below is a detailed introduction to its core features, industrial applications, typical mechanisms and selection criteria.

1. Product Definition & Operating Limits

Modelldefinition

FENG: Guide unit for ISO 15552 standard cylinders

50: Matched cylinder bore: 50 mm

450: Guide stroke: 450 mm

GF: Plain bearing (sintered bronze)

Core Load Ratings (Determine Applicable Scenarios)

Static lateral force Fy/Fz: 1600 N; Dynamic lateral force: 1260 N

Static torque: Mx=83 Nm, My/Mz=89 Nm; Dynamic torque Mx=65 Nm

Features of GF Plain Bearing

High rigidity, good impact resistance, dust resistance and low cost. Ideal for continuous or intermittent low-speed operation. Not applicable to high-frequency and high-speed cycles (select KF ball bearing for high-speed working conditions).

Compatible Cylinders

DSBC-50, DNC-50, DSBG-50 series standard cylinders. Coaxial installation with a coupling is mandatory.

2. Main Industrial Applications

1) Automobilbau & Komponentenmontage (Most Typical)

Body welding fixtures, tooling push-pull/lifting mechanisms, long-stroke heavy-duty transfer units, pressing and clamping devices for chassis and door components.

Merkmale: Long stroke, large overhanging load, strong lateral force, stabiler Betrieb, occasional impact, dusty environment with welding spatter. GF plain bearing delivers higher durability and avoids jamming caused by welding debris.

2) Holzbearbeitung & Furniture Machinery

Edge banders, panel saws, sliding table saws, panel loading/unloading and transfer mechanisms, heavy-duty pressing and pushing devices.

Der 450 mm long stroke and high lateral force resistance prevent piston rod sagging, torsion and deviation during panel transportation. The plain bearing is less prone to jamming amid heavy wood dust and features longer service life than ball bearings.

3) Verpackung, Logistik & Lagerung

Lifting and transfer of cartons and pallets, end units for palletizing/depalletizing, push-pull devices for heavy bins, diverting and stopping mechanisms on conveyor lines.

Working conditions: Niedrige Geschwindigkeit, heavy load, long-distance transportation, large overhanging load and frequent start-stop impact. GF features excellent impact resistance and requires minimal maintenance.

4) Allgemeine industrielle Automatisierung (Werkzeugmaschinen, Gummi & Kunststoffe, Drucken)

Machine tool loading/unloading, push-pull of heavy tooling, auxiliary mechanisms for injection molding and extrusion machines, roller transfer units for printing machines, auxiliary guidance for hydraulic and pneumatic presses.

It solves common failures including cylinder jamming, seal damage and shortened service life caused by piston rod sagging, eccentric lateral load and excessive torque under long-stroke operation.

5) Materialhandhabung & Gantry Systems

End-effectors of small gantry machines, vertical/horizontal heavy-duty slides for gantry axes, long-stroke lifting units with vacuum cups or grippers.

Der 450 mm stroke suits medium-span applications. It bears eccentric loads, lateral forces and overturning torques to protect cylinders.

3. Tpical Mechanical Applications & Selection Reasons
4. Long-stroke heavy-duty push-pull/transfer: With a rated dynamic lateral force of 1260 N, the guide unit shares eccentric loads that a single cylinder cannot withstand, preventing piston rod bending and uneven seal wear.
5. Overhanging/eccentric load (Guidance is highly required): Eccentric loads from end grippers or workpieces generate overturning torques (Mx/My/Mz). The GF type provides high torsional rigidity to ensure linear accuracy and avoid torsion.
6. Continuous/intermittent low-speed operation (≤0.5 m/s, ≤10 cycles per minute): Made of wear-resistant bronze with plain friction design, it generates low heat at low speed, offers long service life and strong impact resistance. Replace with KF ball bearing for high-speed operation (>1 m/s and high-frequency cycles).
7. Staubig, oily and harsh environments: Plain bearing structure resists jamming in wood dust, welding spatter and workshop oil contamination and needs little maintenance, while ball bearings are easily blocked by dust.
8. Auswahlrichtlinien: GF vs KF

✅ Recommended for FENG-50-450-GF (Plain Bearing)

Cylinder bore 50 mm and working stroke around 450 mm

Niedrige Geschwindigkeit, heavy load, large lateral force/torque and overhanging eccentric load

Staubig, spatter-laden or oily harsh environments

Kostenkontrolle, low maintenance requirement and impact resistance priority

❌ Not Applicable (Choose FENG-50-450-KF Ball Bearing Instead)

Hohe Geschwindigkeit (0.5–1 m/s), high-frequency cycles, low friction demand and high positioning accuracy

Clean rooms or dust-free environments requiring low abrasion

5. Application Profile Summary

This guide unit is designed for linear push-pull, transfer and lifting mechanisms with 50 mm Bohrung, 450 mm long stroke, low speed, heavy load, overhanging eccentric load, large lateral force/torque and harsh dusty conditions. It is a robust guide accessory paired with DSBC/DNC-50 cylinders for reliable protection.

It acts as rigid guidance protection for DSBC/DNC-50 standard cylinders, eliminating problems such as piston rod sagging, torsion, uneven wear and jamming under long-stroke operation.

Anwendungsfälle

1. Automobilbau: Long-stroke Push-Pull for Body Welding Fixtures & Chassis Components

Fall 1: Push-Pull Mechanism for Body Side Welding Tooling

Arbeitszustand: Horizontal 450 mm push-pull motion on automotive welding lines; 25 kg overhanging fixture and welding torch with eccentric load at the end; large lateral force, welding spatter and dust, frequent start-stop impact, operating speed ≈0.3 m/s (low speed).

Konfiguration: DSBC-50-450-PPVA-N3 Cylinder + FENG-50-450-GF Guide Unit + Coupling

Existing Problem: A single cylinder with overhanging load suffers from piston rod sagging, torsion, uneven seal wear, short service life and positioning deviation.

Auswahlgrund (GF over KF): Heavy welding spatter and dust easily jam ball bearings (KF). GF plain bearing features impact resistance, dust resistance, low maintenance and lower cost.

Application Effect: Static lateral force 1600 N and dynamic lateral force 1260 N fully bear eccentric torques; stable linearity, and cylinder service life extended by 3 Zu 5 mal.

Fall 2: Heben & Transfer for Chassis Components (Subframe)

Arbeitszustand: Vertikal 450 mm lifting motion, carrying 50 kg workpiece pallet with eccentric center of gravity; required overturning torque resistance; oily and dusty workshop environment.

Konfiguration: DNC-50-450 + FENG-50-450-GF

Vorteil: Prevents piston rod bending and guide jamming; no frequent lubrication required for long-term continuous operation.

2. Holzbearbeitungsmaschinen: Long-stroke Pushing & Pressing for Panels (Benchmark for Dusty Conditions)

Fall: Panel Transfer for Heavy-duty Sliding Table Saws & Edge Banders

Arbeitszustand: Horizontal 450 mm stroke for transferring large panels (1.2–2.4 m); heavy eccentric lateral load caused by panel weight and friction; heavy wood dust, continuous low-speed operation.

Konfiguration: DSBC-50-450 + FENG-50-450-GF

Existing Problem: Single cylinder for long panel transportation leads to end sagging, Abweichung, material jamming and poor cutting accuracy.

Auswahlgrund: Sintered bronze plain bearing (GF) resists wood dust, avoids jamming and withstands impact, while KF ball bearings are easily blocked by dust.

Application Effect: Stable linear guidance, no panel deviation, consistent cutting accuracy and prolonged maintenance intervals.

3. Verpackung & Logistik: Heavy-duty Transfer & Lifting for Pallets & Bins

Fall: Long-stroke Stopping & Transfer for Heavy Carton/Pallet Palletizing Lines

Arbeitszustand: 450 mm horizontal/vertical motion for transporting 30–50 kg pallets and bins; overhanging load, frequent start-stop impact, low speed and dusty environment.

Konfiguration: DSBC-50-450 + FENG-50-450-GF

Vorteil: Shares lateral forces, prevents piston rod bending and cylinder seal damage, and reduces downtime for maintenance.

4. Allgemeine industrielle Automatisierung: Machine Tool Loading & Unloading, Auxiliary Mechanisms for Injection Molding Machines

Fall 1: Long-stroke Push-Pull for Heavy-duty Jigs on CNC Machine Tools

Arbeitszustand: Horizontal 450 mm push-pull for heavy tooling; eccentric load, cutting fluid and dust, intermittent low-speed operation.

Konfiguration: DSBG-50-450 + FENG-50-450-GF

Funktion: Ensures linear motion and torsion resistance, protecting cylinder piston rods and seals.

Fall 2: Ejecting & Transfer Auxiliary Mechanisms for Injection Molding Machines

Arbeitszustand: 450 mm long-stroke ejection and transfer for molds and workpieces; impact during demolding, oily and dusty environment, low speed and heavy load.

Auswahlgrund: GF features impact resistance, oil resistance and simple maintenance.

5. Materialhandhabung & Small Gantry Systems: Long-stroke Lifting for End-effectors

Fall: Vertical Lifting Axis of Gantry Robots (450 mm Stroke)

Arbeitszustand: Vertical lifting with vacuum cups or grippers installed at the end; carrying 10–30 kg workpieces, eccentric load and large overturning torque, low speed.

Konfiguration: DSBC-50-450 + FENG-50-450-GF

Vorteil: Bears overturning torques, prevents piston rod torsion and guarantees linearity of vertical lifting.

6. Core Common Features of All Cases
7. Stroke Matching: 450 mm working stroke and 50 mm cylinder bore fully conform to product specifications.
8. Lastabgleich: Static lateral force 1600 N, dynamic lateral force 1260 N and torque up to 80 Nm perfectly suit medium heavy-duty eccentric load conditions.
9. Environment Matching: GF plain bearing is the optimal choice for dusty, spatter-laden and oily environments; ball bearings tend to fail in such conditions.
10. Installationsvoraussetzung: Must be assembled with DSBC/DNC/DSBG-50 cylinders and coaxial couplings. Eccentric installation is strictly prohibited.