The V8 series HMI wird eingestellt. It is widely used on legacy equipment (z.B., Toshiba injection molding machines), featuring a 10.4-inch analog resistive industrial touchscreen.
Modellcode-Definition
V810: V8 series, 10.4-inch model
ich: Built-in LAN Ethernet port (V810iCN has no optional expansion unit port)
C: Standard VGA (640×480) Economy-Version
N: Analog resistive touch panel
080: DC24V power supply variant (suffix D also stands for DC24V; AC models have no such suffix)
Kern-Hardware-Spezifikationen
Anzeige: 10.4″ TFT-Farb-LCD, 640×480 VGA, 65,536 Farben
Touch type: Analog-resistiver Touch
Hintergrundbeleuchtung: LED, rated service life approx. 70,000 Std.
Erinnerung: 4.5MB FROM for screen storage; 128KB SRAM (for recipes & alarm logs)
Front panel protection: IP65 (with original waterproof gasket), rear side IP20
Gesamtabmessungen: 303.8 × 231.0 × 69.0 mm
Panel cutout size: 289.0 × 216.2 mm (+0.5/-0 Toleranz)
Rear Interface List
- LAN RJ45: 10/100Mbit/s-Ethernet
- MJ1, MJ2 (8-pin modular): RS232/485
- D-Sub9 (CN1): RS232C / RS422/485
- USB-A (Host), USB-B (Programming slave port)
- CF-Kartensteckplatz (legacy CF card, not SD card)
- 24VDC power terminal block
Notiz: V810iCN does NOT support GU video/RGB optional modules
Software & Kommunikation
Programmiersoftware: V-SFT-5 / V-SFT-6 (V-SFT6 supports V8, V9 and V10 series simultaneously)
8-way multi-protocol communication: Verbinden Sie sich mit 8 PLCs of different brands simultaneously (Mitsubishi, Siemens, Omron, Delta, Temperaturregler, Wechselrichter, usw.)
Unterstützte Funktionen: Alarm, Trenddiagramme, Rezeptverwaltung, macro scripts, PLC ladder transfer, USB printing, CF card backup for screens & logs
Ersatzoptionen (Discontinued Model Upgrade)
- Official Series Upgrade: V1010iC (10.4-Zoll, identical cutout; project conversion via V-SFT automatic tool) – Top priority for direct replacement
- Domestic HMI Replacement: 10.4-inch local HMIs. Requires redeveloping project screens and reconfiguring communication protocols.
Wichtige Erinnerung: V8→V10 project conversion is irreversible. Always back up the original project before conversion.
Häufige Fehler & Wartungstipps
Typical failures: Unresponsive touch, touch offset, black screen, backlight failure, communication loss, unreadable CF card
Ersatzteile: Touch panel, LED-Hintergrundbeleuchtung, Leistungsplatine, CF-Karte, backup battery for SRAM
Maintenance note: Legacy CF cards are difficult to source. Use USB for program upload/download whenever possible.
Hakko MONITOUCH V8 Series (Hakko Electronics / Fuji Electric) Vollständige Modellliste
The entire V8 series is end-of-life (EOL).
Suffix-Erklärung
ich: Built-in LAN Ethernet port; no i = no Ethernet port
S: High-performance model, supports GU RGB video optional modules
T: Mid-range model
C: Standard economy model (V810iCN belongs to this branch)
M: Simplified model exclusive to V806
CH: 7.5-inch handheld type
X: 15-inch XGA high-end model
N: Analog-resistiver Touch; D / 080: DC24V-Stromversorgung
5.7-Zoll | V806 Series (320×240 QVGA)
V806M / V806iM
V806C / V806iC
V806T / V806iT
Power variants: V806iCD, V806iTD, V806iMD (DC24V)
7.5-Zoll | Handheld Model V808CH
V808CH / V808iCH
8.4-Zoll | V808 Series (640×480 VGA)
V808C / V808iC
V808S / V808iS
Power variants: V808iCD, V808iSD (DC24V)
10.4-Zoll | V810 Series (640×480 VGA, your target model here)
V810C / V810iC (Economy-Version; V810iCN-080 falls here; iC version cannot install GU video modules)
V810T / V810iT (Mittelklasse, supports GU optional units)
V810S / V810iS (Leistungsstark, supports GU video/RGB modules)
Suffix variants: N (Widerstandsberührung), D/080 (DC24V), z.B., V810iCN, V810iTN, V810iSN
12.1-Zoll | V812 Series (800×600 SVGA)
V812S / V812iS (Leistungsstark, supports GU video modules)
15-Zoll | V815 Series (1024×768 XGA)
V815iX (V8 series flagship; Ethernet + video input)
Function Comparison Table
| Model Branch | Built-in LAN (ich) | GU Video Module Support | Positionierung |
| V8xxC (V810iC/V808iC) | Optional i | ❌ | Wirtschaft (standard for injection molding machines) |
| V8xxT (V810iT) | Optional i | ✅ | Mid-range general purpose |
| V8xxS (V810iS/V812iS/V808iS) | Optional i | ✅ | Leistungsstark |
| V815iX | ✅ | ✅ | 15″ XGA top model |
| V806M | Optional i | ❌ | 5.7-inch entry-level |
| V808CH | Optional i | ❌ | 7.5-inch handheld |
Optional Units (For V8i models with expansion port, excluding V810iC)
GU-00/01/02/03/10/11: RGB video input units; DUN-10: V806 dedicated expansion unit
Software & Ersatz
Programmiersoftware: V-SFT5 / V-SFT6
Official upgrade series: V10 series (V1010iC is the preferred drop-in replacement for V810iCN, same cutout size; one-click project conversion in V-SFT6)
Replacement Model List for V810iCN-080 (Hakko MONITOUCH)
Key specs of original unit: 10.4-Zoll, DC24V, integriertes Ethernet, economy grade, no video expansion port, cutout size: 289.0 × 216.2 mm
- Original Brand Upgrade (Erste Wahl: Projektmigration, No Cutout Modification)
(1) V10 Series (Current Fuji/Hakko Mainstream, Official Recommended Replacement)
V1010iC-D (Top-Wahl)
✅ Identical panel cutout; Keine Schrankmodifikation erforderlich. V-SFT6 automatically converts V8 project files.
✅ Equipped with LAN, serial ports and USB; SD card replaces legacy CF card.
⚠️ Resolution upgraded from 640×480 to 800×600; screens auto-scale with minor control adjustments needed. Converted projects cannot be opened again on V8 software.
V1010iS-D (High-end Alternative)
Supports video input with higher performance, same cutout dimensions for future video expansion needs.
(2) V9-Serie (Transitional Discontinued Model, Only Stock Available)
V9100iC (Official designated replacement for V810iC series)
Project migration via V-SFT6. Stock availability is limited; not the first choice.
(3) V8 Series Spare Replacement (Only for Used Secondhand Parts, Not for New Purchases)
V810iTN-080 / V810iSN-080
Gleicher Umriss & cutout size; extra video expansion port. The original V810iCN cannot fit GU modules, while iTN/iSN support video add-ons. Project files can be downloaded directly without modification.
- Domestic HMI Replacement (Project Reconfiguration Required)
Selection criteria: 289×216mm cutout, 10.4-Zoll, DC24V, Ethernet + RS485/232 ports
Weintek: MT8106iP / MT8106iE (Check cutout carefully; adapter plate may be needed)
Kunlun Tongtai: TPC1061Ti (Verify cutout dimensions)
Kinco / Xinje: Most 10.4-inch high-end models require custom adapter panels or cabinet re-cutting.
Nachteil: V-SFT project files cannot be imported directly; full re-configuration and communication debugging required.
Auswahlvergleichstabelle
| Ersatzmodell | No Cutout Modification | Direct Project Migration | Video Module Support | Lieferstatus |
| V1010iC-D | ✅ | ✅ (V-SFT6 conversion) | ❌ | Commercially available |
| V1010iS-D | ✅ | ✅ | ✅ | Commercially available |
| V9100iC | ✅ | ✅ | ❌ | Auslaufmodell, only stock/used |
| V810iTN/080 | ✅ | ✅ | ✅ | Auslaufmodell, secondhand only |
| Domestic 10.4″ HMI | Adapter plate may be needed | ❌, full re-programming | Depends on model | Abundant stock |
Critical Migration Notes
- Back up the original V8 project file before conversion; V8→V10 conversion is irreversible.
- Recipes and alarm logs stored on the original CF card must be exported and imported separately after migration.
- Communication protocols (Mitsubishi MC, Siemens S7, Omron Hostlink, usw.) are fully compatible with V10; protocol parameters remain almost unchanged.
- Terminal pin assignments, 24V power and serial pinouts differ. Always cross-check the V10 manual before wiring.
Schütz,Leistungsschalter,Sensor,Encoder,SPS,Konverter






















NH42-63-318x560.png)



