IFM EVT002 Sensorverbindungskabel

(Bestellcode: ADOGH040VAS0010E04)

Produkttyp: M12 straight female socket, 4-Pin A-kodiert, one end molded connector, the other end open wire outlet; hygienic orange PVC sensor cable, designed for wet washdown environments in food & Getränkeindustrie.

✅ Wichtige Spezifikationen

Stecker: M12 straight female, A-kodiert, 4 Stifte, vergoldete Kontakte

Cable construction: 4×0,34 mm², outer diameter Ø4.9 mm, orange PVC jacket

Länge: 10 M

Nennspannung: AC＜250 V / DC＜300 V

Total rated current: 4 A

Anzugsdrehmoment: 0.6～1.5 Nm

Schutzart: IP65 / IP67 / IP68 / IP69K (Hochdruckreinigungsfähig)

Temperaturbereich: Statisch: -25~100 ℃; Moving (drag chain): 5~100 ℃ (cULus certified max. 50 ℃)

Versiegelung: EPDM; Lock nut: 316L Edelstahl (1.4404); Molded housing: PVC

Hauptmerkmale: Silikonfrei, Schleppkettentauglich, Vibration & shock resistant, mechanical end stop to protect O-rings

Gewicht: 388.7 G

Standard wire colour (4-Kern): BN (braun), BK (Schwarz), DAS (Blau), WH (Weiß)

📌 Cross-reference within EVT hygienic series

EVT001: 5 M, otherwise identical to EVT002

EVT002: 10 M, straight female socket (aktuelles Modell)

EVT004: 5 M, angled female socket

EVT005: 10 M, angled female socket

Series distinction: EVC series = standard black PUR cable; EVT = food-grade orange PVC with EPDM seals & 316L nuts, optimized for washdown stations.

🧩 Typische Anwendungen

Wiring for inductive Sensoren, fotoelektrische Sensoren, pressure/temperature transmitters and IO-Link sensors on food, Getränk, dairy and pharmaceutical production lines; geeignet für CIP/SIP-Reinigung, wet environments and moving drag chain installations.

⚙️ Installation & Wartungsrichtlinien

1. Do not exceed the specified torque; over-tightening will crush the EPDM O-ring.
2. IP69K protection relies on intact sealing; replace the cable immediately if the O-ring is damaged or the housing is cracked.
3. PVC jacket is not suitable for long-term exposure to strong solvents or high-concentration alkaline cleaners. For chemically aggressive media, select EVM series with PUR jacket and FKM seals.
4. Minimum bend radius for drag chain use ≥ 10×cable outer diameter; cycle life 1 Millionen Zyklen, allowable torsion ±180°/m.

📎 Alternative Selection

Original IFM Direkter Ersatz: No direct equivalent; change length by choosing EVT001 / EVT005.

Markenübergreifende kompatible Modelle: Balluff BCC M425-0000-1A08-100, Turck PKG4M-10 (M12 A-code 4-pin straight female, 10 M)

Inländische Alternative: M12 A-code 4-pin straight female, 10 M, 0.34 mm², orangefarbenes PVC, 316L-Mutter, EPDM seal sensor cable.

Main Application Fields of IFM EVT002

EVT002 is a hygienic M12 sensor cable with IP69K high-pressure washdown rating, silicone-free construction, 316L stainless steel lock nut and EPDM sealing. It is primarily designed for wet cleaning stations in the food industry:

1. Essen & Getränk (Primäre Anwendung)

Molkerei, meat processing, bakery, snack food, brewery and beverage production lines; CIP online cleaning, spray zones, Förderer, Abfüllmaschinen, packaging equipment and sterilization systems. Used for wiring proximity sensors, fotoelektrische Sensoren, IO-Link devices, flow and pressure transmitters. Silicone-free construction prevents silicone contamination affecting subsequent painting and sealing processes.

2. Pharmaceuticals & Kosmetika

Wet clean zones for API production, formulation and cosmetic manufacturing; sensor signal wiring under moderate washdown conditions (not for continuous exposure to strong corrosive solvents).

3. Getreide & Feed Processing

Fördern, batching and packaging sections for grain and feed; sensor wiring on conveyors and elevators subject to dust and periodic water washing.

4. Other Wet-Area Automation Scenarios

Small-scale slaughterhouses and seafood processing machinery; also used for drag chain cabling in general automation with high protection and humid conditions (not recommended for continuous immersion in strong acid/alkali).

Compatible Devices

M12 A-coded 4-pin sensors: Näherungsschalter, fotoelektrische Sensoren, Druck, Temperatur, flow and IO-Link signal sensors.

Selection Boundary Reminders

The orange PVC jacket cannot withstand prolonged exposure to strong chemicals or high-alkaline cleaning agents. For chemically aggressive environments, select EVM series with PUR jacket and FKM seals.

Fully rated for drag chain movement, ideal for moving cabling on conveyors and reciprocating machinery.

EVT series = food-grade orange PVC cable; M12 A-code, 4 cores, 316L stainless steel nuts, EPDM seals, IP69K, silikonfrei, Schleppkettentauglich. Below is the full model list: ① Basic EVT001/002/004/005 (female socket, open wire); ② LED versions, male connectors, M8 types and shielded variants.

1. Basic EVT00x Models (M12 4-polige Buchse, one molded end + open wire, orangefarbenes PVC)

1. Other Common Models in EVT Series

1) Male Connector Cables (M12 4-poliger Stecker, open wire)

EVT326: Straight male, 5 M

EVT327: Angled male, 10 M

2) M8 Small Hygienic Cables (3-Kern)

EVT155: M8 male-to-female short jumper

3) Shielded Versions (5-Kern, anti-interference for food lines)

EVT381～EVT399, EVT400～EVT411 (M12 5-core shielded, orangefarbenes PVC, IP69K)

4) Y-Distribution Cables (1-to-2 splitter)

EVT329: M12 1 male to 2 female, 1 M, hygienic Y-cable

III. Regeln zur Modellbenennung

1. Suffix 1/2 = straight connector; Suffix 4/5 = angled connector
2. Suffix 1/4 = 5 m Länge; Suffix 2/5 = 10 m Länge
3. EVT = orange PVC food grade; EVC = standard black PUR; EVM = chemical-resistant PUR; EVF = highly resistant MPPE.
4. Unified Technical Parameters (EVT001~005)

Leiter: 4×0,34 mm², outer diameter Ø4.9 mm, orangefarbenes PVC

Versiegelung: EPDM; Nuss: 316L Edelstahl; Gold-plated contacts

Schutz: IP67/IP68/IP69K; Silikonfrei; Drag chain suitable

Stromspannung: AC250V / DC300V; Aktuell: 4 A

IFM EVT Series · M8 Hygienic Cable List

(Orange PVC, food grade, IP69K, 316L stainless steel nut, silikonfrei, Schleppkettentauglich)

All A-coded M8, split into three categories: M8↔M8 jumper, M8↔M12 adapter cable, single-ended molded M8 (one M8 connector + open wire)

1. M8 ↔ M8 Jumper Cables (3-Kern)

1. M8 ↔ M8 Jumper Cables (4-Kern)

III. M8 ↔ M12 Adapter Cables (M12 sensor to M8 module conversion)

1. Single-Ended M8 Molded Cables (one M8 connector + open wire, same structure as EVT002)

✅ Universal M8 EVT Specifications (Consistent with EVT002)

Jacke: Orange PVC, silikonfrei, Schleppkettentauglich

Lock nut: 316L (1.4404) Edelstahl

Schutzart: IP67 / IP68 / IP69K, high-pressure washdown approved

Anzugsdrehmoment: 0.3～0.5 Nm

3-core version: 3×0,34 mm², max. 3 A

4-core version: 4×0,34 mm², max. 4 A

📌 Selection Tips

1. EVT154~157: With LED power indicator, ideal for commissioning on food production lines.
2. EVT164/165: Keine LED, geringere Kosten.
3. EVT270/271/272/274/275: Single-ended open wire type, same application logic as EVT002, only with M8 connector instead of M12.
4. EVT251 & EVT261: M12-to-M8 adapters, used to connect legacy M12 sensors to M8 IO-Link masters.