contactor,cortacircuitos,inversor solar,medidor electrico,baterias solares
TEJIDO PDP22‑FBP.100 | PROFIBUS DP Fieldbus Interface Module
ABB FBP series PROFIBUS DP/V1 fieldbus interface plug-in is used to connect FBP devices such as intelligent motor controllers (UMC) to PROFIBUS DP network. It supports high-speed communication up to 12 Mbps with IP65 protection grade, adecuado para entornos industriales hostiles.
- Explicación del código del modelo
| Segmento de código | Descripción |
| PDP22 | Serie de productos: PROFIBUS DP fieldbus plug-in, applicable to FBP devices e.g. UMC intelligent motor controller |
| FBP | Tipo de interfaz: FieldBusPlug, fieldbus plug-in, supports PROFIBUS DP/V1 protocol |
| 100 | Código de especificación: Versión estándar, max transmission rate 12 mbps, 2-channel design |
- Main Technical Specifications
| Categoría | Detailed Parameters |
| Marca | TEJIDO (Suiza) |
| Tipo | PROFIBUS DP/V1 Fieldbus Interface Plug-in (FieldBusPlug) |
| Protocolo de comunicación | PROFIBUS DP V0/V1, Cumple con IEC 61158 |
| Velocidad de transmisión | 9.6 kbit/s ~ 12 Mbit/s (configurable via configuration software) |
| Interfaz de comunicación | RS-485 differential signal, A-coded M12 connector |
| Channel Quantity | 2 canales |
| Fuente de alimentación | CC 24 V ±10 %, typical power consumption ≤0.6 W |
| Corriente nominal | 1 A |
| Grado de protección | IP65 (for on-site installation) |
| Temperatura de funcionamiento | -20℃ ~ +60℃ |
| Max Cable Length | 250 metros (varies by transmission rate) |
| Dimensión | 40 milímetros × 20 milímetros × 9 milímetros |
| Peso | Aprox.. 10 gramo |
| Certificaciones | CE, cUL, CEI 61131-2 industrial control standard |
| Order Number | 1SAJ240100R1013 (Oficial), 6296317 (Supplier) |
- Full PDP22-FBP Series Model List
| Modelo | Core Specification | Velocidad de transmisión | Grado de protección | Características principales |
| PDP22-FBP.100 | Tipo estándar, 2 canales | 9.6 kbit/s ~ 12 mbps | IP65 | Basic PROFIBUS DP interface, matches UMC intelligent motor controller |
| PDP22-FBP.025 | Economic type, 1 canal | 9.6 kbit/s ~ 1.5 mbps | IP65 | For low-speed application, cost-optimized design |
| PDP22-FBP.050 | High-speed type, 2 canales | 9.6 kbit/s ~ 12 mbps | IP65 | Enhanced anti-interference, suitable for complex industrial sites |
| PDP22-FBP.200 | Multi-protocol type, 2 canales | 9.6 kbit/s ~ 12 mbps | IP65 | Compatible with PROFIBUS DP & PROFIBUS FMS |
| PDP22-FBP.500 | Redundant type, 4 canales | 9.6 kbit/s ~ 12 mbps | IP65 | Dual redundant design to improve system reliability |
| PDQ22-FBP.100 | Isolated type, 2 canales | 9.6 kbit/s ~ 12 mbps | IP65 | Electrical isolation design to avoid signal interference |
- Equivalent & Modelos de reemplazo
| Replacement Type | Modelo | Marca | Descripción de la diferencia |
| Same Series Replacement | PDP22-FBP.050 | TEJIDO | Stronger anti-interference, fully compatible, precio ligeramente superior |
| Same Brand Upgrade | PDP22-FBP.200 | TEJIDO | Multi-protocol support including PROFIBUS FMS, wider application |
| Competitor Alternative | 3RK1901-1CB00 | siemens | PROFIBUS DP interface module for Siemens motor controllers, slight mounting size difference |
| Competitor Alternative | 1786-RPA | rockwell | PROFIBUS DP module with compatible protocol, needs configuration adjustment |
| Competitor Alternative | X20BM11 | B&R | High-speed PROFIBUS DP module for B&R automation system |
- Ámbito de aplicación & Industry Fields
Recommended Applications
- Intelligent Motor Control: Connect UMC motor controllers to PROFIBUS DP network for motor status monitoring and remote control
- Distributed I/O System: Act as communication bridge between field devices and control layer, ideal for MCC drawer-type cabinet
- Process Industry: Critical equipment control in oil refineries and chemical plants; support hot-swap without offline bus nodes
- Automatización de fabricación: Centralized monitoring and management of production line motors, pumps and fans
- Automatización de edificios: Control network for HVAC and lighting systems in large commercial buildings
- Energy Industry: Data collection and transmission for photovoltaic and wind power station equipment
Escenarios no recomendados
- Non-PROFIBUS DP networks: Not directly applicable to PROFINET, EtherCAT and other industrial Ethernet systems
- Ultra-long distance transmission: Over 250m distance requires additional signal amplifiers
- Severe electromagnetic interference environment: Use PDP22-FBP.050 enhanced version without extra shielding measures
- Non-FBP standard devices: Extra adapter is required for connection
- Common Fault Diagnosis & Soluciones
| Fenómeno de falla | Posibles causas | Soluciones |
| Communication interruption | 1. Bus cable failure | 1. Check M12 connection and cable continuity |
| 2. Unactivated terminating resistor | 2. Confirm 120惟 terminating resistor setting | |
| 3. Address conflict | 3. Assign exclusive PROFIBUS address | |
| 4. Unstable power supply | 4. Ensure 24V DC power within 卤10% tolerance | |
| Abnormal LED indicator | 1. Bus power off | 1. Check bus and module power supply |
| 2. Mismatched communication protocol | 2. Set protocol to PROFIBUS DP/V1 in configuration software | |
| 3. Module hardware failure | 3. Replace module and contact ABB technical support | |
| Data transmission error | 1. Excessively high baud rate | 1. Reduce transmission rate for stable communication |
| 2. Poor cable shielding | 2. Optimize shielding layer connection and grounding | |
| 3. Surrounding strong interference sources | 3. Keep away from frequency converters and high-power equipment | |
| Unrecognizable module | 1. Improper installation | 1. Reinstall firmly in place |
| 2. Device incompatibility | 2. Confirm device complies with FBP standard | |
| 3. Outdated firmware | 3. Upgrade module firmware to latest version |
- Daily Maintenance Guidelines
- Inspección periódica: Check M12 connector tightness and corrosion every 3 meses
- Cleaning Maintenance: Remove surface dust with dry compressed air, avoid chemical detergents
- Gestión de energía: Keep 24V DC power stable within ±10% fluctuation range
- Hot-swap Operation: Follow official ABB operation specifications during drawer replacement to prevent module damage
- Firmware Upgrade: Update firmware regularly via official ABB website for better performance and stability
- Network Monitoring: Real-time monitor communication status via PROFIBUS diagnostic tools to eliminate hidden troubles in advance
- Air Freight Compliance & Proceso de dar un título
Air Shipment Approval: No built-in lithium battery or super capacitor, classified as general industrial electronic component, available for normal air transportation
Main Certifications: CE (Cumple con IEC 61158), cUL (compatible con UL 508), CEI 61131-2
HS Code: 85371090 (Network interface equipment for industrial control)
- Selection Rules & Quick Memorization
Quick Selection Rules
Suffix number definition: 100=Estándar, 025=Economic, 050=High-speed enhanced, 200=Multi-protocol, 500=Redundant
Series difference: PDQ22 = Isolated type; PDP22 = Non-isolated type
Transmission rule: Max speed 12 mbps; longer distance matches lower baud rate; 250 meters is the recommended maximum distance
