ifm IS-3002-BPKG Rectangular Inductive Proximity Sensor

(Order designation; core part number: IS5001)

Derivatives of the same series:

IS5035: IS-3002-BPKG/AS (M8 connector version)

IS5068: IS-3002-BPKG/0,3M/AS-610 (0.3m short cable + conector m8)

Especificaciones básicas

Tipo: rectangular sensor de proximidad inductivo, montaje empotrado

Distancia de detección nominal: 2 milímetros

Producción: 3-cable CC, PNP normalmente abierto (NO)

Dimensiones: 27.8 × 10.2 × 16 milímetros, ultra-thin rectangular housing for confined installation spaces

Datos eléctricos

Tensión de alimentación: DC 10～30 V

Corriente sin carga: ＜15 mA

máx.. corriente de carga: 200 mamá

Frecuencia de conmutación: 800 Hz

Caída de voltaje: ≤2,5 V

Protection features: reverse polarity, protección contra cortocircuitos y sobrecargas

Histéresis: 1～15 % of Sr (distancia de detección nominal)

Correction factor: steel=1; acero inoxidable = 0,7; brass=0.4; aluminium=0.3; copper=0.2

Ambiental & Datos mecánicos

Clasificación de protección: IP67

Temperatura de funcionamiento: -25 ℃ ～ +80 ℃

Material de la carcasa: PBT

máx.. par de apriete: ＜0.5 N·m (use flat washers)

Indicación de estado: yellow LED

Conexión (standard IS5001): 2 m fixed PVC cable, 3×0,14 mm²

BN (Marrón): L+ positive supply

ESTE (Azul): 0V ground

bk (Negro): Salida de señal PNP

Key Application Keywords

Jig positioning, cylinder end-position detection, conveyor line counting, machine tool limit monitoring, metal detection in narrow spaces, material handling position feedback, signal acquisition for automated machinery

Selección & Notas de reemplazo

Definición de sufijo: no suffix = 2m fixed cable; `/AS` = M8 3-pin straight connector; `/0,3M` = short lead
Domestic equivalent replacement: rectangular inductive proximity sensor with identical size, 2mm flush-shielded, PNP SIN salida
Nota de instalación: montaje empotrado; sensing face can be embedded into metal brackets without reduction of rated sensing distance.

Guía de solución de problemas

Sin salida: first check 24V power supply and polarity; verify no reverse wiring

Señal inestable: check voltage drop, gap between sensor and metal target, nearby strong magnetic interference and mounting clearance

LED does not light up: missing power supply or internal short circuit

NPN Version with Identical Mechanical Outline (IS Series, 27.8×10.2×16, flush 2mm, 3-cable CC)

Observación: IS series is originally PNP dominant; NPN models carry suffix BOKG

IS5002: IS-3002-BOKG, NPN normally open, 2m de cable de PVC; fully interchangeable with IS5001 with identical mounting holes

IS5036: IS-3002-BOKG/AS, NPN NO, M8 3-pin straight connector (counterpart of IS5035)

IS5069: IS-3002-BOKG/0,3M/AS-610, 0.3m short cable + conector m8 (counterpart of IS5068)

Alambrado: BN=L+, BU=0V, BK=NPN output; supply 10~30V DC. All other parameters (frecuencia de conmutación, rango de temperatura, IP67, protección) match IS5001 completely.

III. Domestic Replacement List (Recomendado, pin-to-pin compatible, 2mm flush-shielded)

Selection criteria: 27.8×10.2×16 outline, flush shielded, 2mm distancia de detección, DC10–30V, IP67, switching frequency ≥800Hz

Sodron SN08Y-02BPA (PNPNO) / SN08Y-02BNA (NPN NO)

On-site Installation Guidelines

Par de apriete

PBT plastic housing; tightening torque must be below 0.5 N·m to prevent cracking; use thin flat washers to disperse clamping force.

Enrutamiento de cables & alambrado

Standard 2m PVC cable (3×0,14 mm²);

Brown = +24V, Blue = 0V, Black = PNP signal;

Avoid routing alongside power cables and servo motor wires to prevent EMI interference. Use shielded cable or signal filters for long-distance wiring.

Built-in short-circuit & protección contra polaridad inversa; avoid hot-plugging under power.

Idoneidad ambiental

Clasificación IP67; resistente al fluido de corte, cooling water and dust. Not suitable for continuous immersion or strong corrosive solvents (acetona, ácido fuerte/álcali).

Rango de temperatura ambiente: -25～+80 ℃; add heat insulation if installed near heating blocks or injection mould slides.

Gap adjustment

Brecha de trabajo recomendada: 0.5～1.2 mm (leave safety margin). Do not operate continuously at the maximum 2mm gap; vibration will cause signal dropout.

Yellow LED lights up when metal is detected; use the LED for quick commissioning.

Switching frequency limit

Frecuencia nominal: 800 Hz (máximo 800 pulses per second). For field application, limit the frequency to ≤400 Hz. Not recommended for high-speed pulse counting or high-frequency vibration detection.

Important Limitation

This is a standard position sensor, NOT a safety-rated device. Do not connect it to safety circuits, safety gates or emergency stop protection loops.

Only detects ferrous/non-ferrous metals; no response to plastic, film or wood.

Tabla comparativa: IS5001 Ultra-Thin Rectangular vs Standard Cylindrical Proximity Sensors

Artículo	IS5001 IS-3002-BPKG Ultra-Thin Rectangular	Standard M8/M12 Cylindrical Inductive Sensor (p.ej. sim IE5001)
Dimensiones	27.8×10.2×16 mm, ultra-flat	Cylindrical M8/M12/M18; requires radial installation space
Montaje	Flush shielded; fits narrow slots, cylinder side faces and gripper gaps	Enjuagar / opciones sin descarga; threaded body requires radial clearance
Distancia de detección	Fijado 2 milímetros	M8:1.5~2 mm; M12:4 milímetros; M18:8 milímetros; multiple range options
Frecuencia de conmutación	800 Hz	M8 typically 2000 Hz; M12 approx 1000 Hz; wider high-frequency options
Método de fijación	Side-mounted with screws	Threaded screw-in + lock nut; faster installation
Ventajas	Ultra-thin body, ideal for space-critical locations; flush mounting prevents collision damage	Wide model range, flexible sensing distances, universal spare parts, fast commissioning, broad price options
Desventajas	Long body despite thin thickness; short 2mm sensing range; higher price than M8 types	Radial protrusion; prone to collision on slim cylinders and compact grippers
Aplicaciones típicas	Slim cylinders, finger grippers, narrow-slot jigs, small tool magazine positions	General limit detection, conteo del transportador, machinery with ample mounting space
Protección	IP67	Mostly IP67
Producción	PNPNO (NPN version IS5002 available with same outline)	PNP/NPN, NA/NC; full output options
Side Metal Immunity	Flush-shielded (can be embedded in metal brackets); keep ≥5mm clearance from side metal	Flush types can be embedded; non-flush types require large metal clearance