Pepperl+Fuchs 418883 compact photoelectric sensor

（Order No.: ML4-T-KSU/33）

Estado: Discontinued by manufacturer (Obsoleto). No brand-new OEM supplies available; only used/refurbished units circulate in the market.

Tipo de producto: reflexión difusa Sensor fotoeléctrico (Visolux ML4 Series)

Part-No.: 418883, Modelo completo: ML4-T-KSU/33

Núcleo Eléctrico & Parámetros mecánicos

Model Code Decoding for ML4-T-KSU/33

1. ML4: Legacy Visolux ML4 compact photoelectric sensor series
2. t: Diffuse-reflection detection (Direct-detect)
3. KSU: Code for output, wiring and functions (salida PNP, cable outlet)
4. /33: Suffix for version / sensing range specification
5. 418883: Unique internal Pepperl+Fuchs part number

Principio de funcionamiento

The infrared modulated LED emits light, which is reflected by the target object back to the receiver. The sensor circuit evaluates the intensity of the returning light and delivers a PNP switching signal. Sin supresión de fondo, performance is heavily affected by reflection from background objects.

Aplicaciones típicas

Maquinaria de embalaje, object detection on conveyor lines, conteo de partes, door control and position sensing for compact equipment.

⚠️ Selection Pitfalls & Recomendaciones de reemplazo

1. No direct drop-in OEM replacement. The entire legacy ML4 series is discontinued. Direct pin-to-pin replacement is not feasible. Mounting hole layout, sensing range, output type and wiring form must be verified.
2. Preferred upgrade series: ML4.2 Series (new-generation compact square photoelectric sensors)

Reference alternative: ML4.2-8-KSU-R (diffuse-reflection, PNP, cable outlet). Verify sensing range and mounting dimensions.

For M8 connector version: ML4.2-8-KSU-V-R.

3. Boundary Condition Reminders

ML4-T-KSU/33 has no background suppression. For sites with reflective backgrounds, select a background-suppression model during upgrade.

Legacy unit uses fixed cable outlet; new series is available in both cable and M8 connector variants. Confirm wiring form before procurement.

4. Risks of used/refurbished units: Discontinued parts carry no manufacturer warranty. LED ageing and sensitivity drift are likely. Not recommended for safety-critical positions.

Original Factory Packaging Contents

Sensor main unit ×1 (with pre-fitted cable)

Hard-copy Datasheet ×1

Mounting bracket not included; bracket is an individually-ordered option.

Sensing Range of ML4-T-KSU/33 (418883)

This model is discontinued and its original datasheet has been removed from public access. Specifications below are consolidated from legacy Pepperl+Fuchs ML4 catalogues, overseas distributor archives and homologous series data:

1. Standard white target (100×100 mm, 90 % reflectivity): 0-1000 milímetros (0-1 m) effective diffuse-reflection sensing range.
2. Sin supresión de fondo, fixed gain (non-adjustable sensitivity). The suffix `/33` denotes fixed sensitivity; no potentiometer fitted.
3. Minimum detection blind zone: 0 milímetros (triggerable at close proximity).

⚠️ Critical Notes

For black / low-reflectivity targets, the practical working range decreases significantly. Black objects typically achieve only 30-40 % of the nominal range, aprox. 300-400 milímetros.

Without background suppression, reflective objects behind the sensor will cause false triggering.

`/33` = fixed-sensitivity version; potentiometer-adjustable variants of the same series use different suffixes.

Comparison Table for Legacy ML4 vs New-generation ML4.2 Alternatives

Operating Principle of Diffuse-Reflection Photoelectric Sensors

A diffuse-reflection (direct-reflect) sensor is a variant of through-beam sensors. Emitter and receiver are integrated inside one housing. No separate reflector is required; detection relies on light reflected from the surface of the target object itself.

1. Basic Optical Path
2. An internal emitter LED (mostly modulated infrared light) projects a beam outwards.
3. Light strikes the target surface and undergoes diffuse reflection, scattering in all directions.
4. A fraction of the reflected light returns to the internal photodetector.
5. The receiver converts optical signals into electrical signals. Internal circuitry evaluates whether the incoming light intensity exceeds the threshold.
6. Threshold exceeded → switching output turns ON (PNP/NPN conducts). Insufficient returned light → output turns OFF.

✅ Key difference vs through-beam: Through-beam sensors detect light blockage by an object with separated emitter-receiver units. Diffuse-reflection sensors detect light bounced back by the target.

2. Two Types of Diffuse-reflection Sensors: Standard vs Background-Suppression (BGS)

① Standard Diffuse-reflection (p.ej. ML4-T-KSU/33)

Detection criterion: Total received reflected light energy.

Drawback: Cannot distinguish target object from background. Metallic surfaces or white walls behind the sensor can trigger false outputs. Dark-coloured or rough-surface targets return less light and reduce effective sensing distance.

ML4-T-KSU/33 belongs to standard diffuse-reflection: no background suppression, fixed non-adjustable sensitivity.

② Background-Suppression (BGS) reflexión difusa

Adopts triangulation ranging principle. Instead of evaluating light intensity, it analyses the incident angle of returning reflected light.

Only objects within the configured distance window are detected. Even highly reflective background beyond this window is ignored to prevent false switching. Ideal for installations near reflective machine frames or metal surfaces; higher unit cost.

3. Key Practical Engineering Influence Factors
4. Target colour / reflectividad: White paper delivers good reflection. Black rubber or matte dark surfaces produce weak reflection and shorten practical sensing range.
5. Incident angle: Align the beam perpendicular to the target. Tilting reduces returned reflected light.
6. Detection blind zone: Some sensors feature a close-range blind zone. ML4-T-KSU/33 has virtually no blind zone.
7. Sensibilidad: Adjustable-gain versions use a potentiometer to set trigger thresholds. Fixed-gain versions are factory-locked; no on-site modification possible.
8. Wiring Definition for ML4-T-KSU/33 (PNP cable-type)

Marrón: DC24V+

Azul: 0 V / Tierra

Negro: PNP switching signal output

Remaining wires: No conectado

5. Fenómenos típicos de falla & Root-cause Explanation
6. No response when target is present: Target is too dark with insufficient reflection; misaligned mounting angle; LED degradation / ageing.
7. Continuous ON output without target: Reflective background behind sensor (common limitation for standard diffuse-reflection); strong ambient light shining directly onto the receiver window.
8. Inestable / flickering signal: Uneven target surface; mechanical vibration; dust contamination on sensor lens.

Application Fields for Diffuse-Reflection Photoelectric Sensors

Diffuse-reflection sensors integrate emitter and receiver, no se requiere reflector, enabling simple installation. Two main categories exist: standard diffuse-reflection and Background-Suppression (BGS). Standard types are susceptible to target colour and background reflection; BGS delivers higher stability regardless of background reflectivity.

1. Manejo de materiales & Logística

Conveyor-line presence detection, material presence verification, caja de cartón / tote counting

Sorting systems: Parcel arrival confirmation, baffle position validation, material-flow monitoring

Pallet detection, tote position sensing, conveyor jam-up alarm

Nota: Use BGS models for dark cartons. Standard diffuse-reflection such as ML4-T-KSU/33 suffers range reduction on dark-coloured materials.

2. Maquinaria de embalaje (Alimento, Farmacéutico, Daily-use Goods)

Máquinas de embalaje: Detect presence of pouches and cartons; pouch position confirmation

Caza de focas & labelling machines: Label arrival detection, bottle position sensing

Cartoning machines: Detect missing inserts or accessories inside cartons

Beverage production lines: Bottle presence and empty-bottle inspection

Operating conditions often involve dust and moisture; IP67 rating is preferred.

3. Fabricación de automóviles

Part-in-position sensing on component conveyor stations

Body-in-white and final-assembly lines: Work-piece presence detection, bin monitoring

Robot pick-and-place: Raw-part presence confirmation

Metal-rich reflective backgrounds are prevalent. BGS diffuse-reflection sensors are almost universally adopted to avoid false triggering from standard diffuse-reflection units.

4. Machine-tool & General Automation

Machine-tool automatic loading/unloading: Work-piece presence, bin-empty alarm

Press equipment: Work-piece position confirmation

Compact equipment position detection, end-of-stroke object sensing for cylinders

Oil mist and cutting-dust environments require regular lens cleaning.

5. almacenamiento, Automated Storage & AGV

Preliminary obstacle detection for AGVs (for general presence sensing only; NOT for safety anti-collision functions)

Automated warehouse rack-level material detection, pallet presence check at storage locations

Bin full / bin empty monitoring

6. Door Control, Ascensores & Light-industry Machinery

Automatic door anti-pinch detection, high-speed door object sensing

Maquinaria textil: Cloth edge detection and fabric presence monitoring

Maquinaria de impresión: Paper presence and paper-feed detection

7. Goma & Plastics Industry

Injection-moulding machine part-ejection detection to verify finished-part drop-off

Extrusion-line material presence monitoring

✅ Practical Selection Guide & Engineering Pitfall Avoidance

Scenarios Where Diffuse-reflection Sensors Are Not Recommended

1. Transparent films or clear glass bottles (high light transmission yields insufficient reflected light; through-beam sensors are preferred).
2. Multi-metre long-range detection: Retrorreflectante (polarised mirror-reflect) or through-beam sensors are recommended.

Supplementary note: The discontinued ML4-T-KSU/33 standard diffuse-reflection sensor is fit for counting and position-detection applications on conveyor lines with light-coloured work-pieces and non-reflective backgrounds. It is not recommended for automotive body-in-white stations or installations adjacent to metal machine frames.