Modelo completo: QUINT4-PS/1AC/24DC/40
✅ Especificaciones Básicas
Nro. de orden: 2904603
Serie: QUINT4 (4th-generation QUINT POWER high-end fuente de alimentación)
Aporte: Single-phase 100…240 V AC
Producción: 24 En DC, 40 A, potencia nominal 960 W.
Montaje: DE 35 montaje en carril mm
Características clave: SFB Selective Fuse Breaking, NFC parameter configuration, free characteristic curve, wide temperature operation, pre-warning signal output
✅ Core Advantages
- SFB Selective Fuse Breaking: Only the downstream protection trips in case of branch short-circuit; the main power supply remains online without lockout, widely used in automated production lines.
- NFC Interface: Read parameters, adjust voltage, set alarm thresholds and export reports directly via mobile APP.
- Parallel redundancy supported, suitable for high-power control cabinets, PLC clusters and servo power supply.
- Zero-clearance side-by-side installation; no extra heat dissipation gap required.
✅ Cross-References & Reemplazos
Previous generation: QUINT-PS/1AC/24DC/40 (Número de pedido. 2866789, interrumpido); 2904603 is the direct upgraded replacement.
Lower-power models in the same series: 2904597, 2904598, 2904599, 2904600, 2904601, 2904602.
✅ Brief Specification Summary
| Artículo | Parámetro |
| Tipo de entrada | 1-fase CA, wide-range AC/DC compatible |
| Producción | 24 En DC, 40 A |
| Clasificación de potencia | 960 W. |
| Clase de protección | IP20 |
| Temperatura de funcionamiento | -25 ℃ ~ +60 ℃ |
| Comunicación | NFC |
✅ Common Matching Accessories
Módulo de redundancia: QUINT-ORING
UPS unit: QUINT-UPS 24 serie v
QUINT4-PS/1AC/24DC/40 (2904603) Full Technical Data
- Core Datasheet (English Version)
Nro. de orden: 2904603 | Serie: QUINT4 high-end power supply with SFB | Single-phase input, 24 V 40 A, 960 W.
Input Ratings
voltaje CA: 100~240 V AC (-15% ~ +10% tolerancia), stable operation from 85~264 V AC
DC input compatible: 90~300 V DC (≤250 V DC per UL standard)
Rango de frecuencia: 45~65 Hz
Built-in slow-blow input fuse: 20 A
Terminales: l / norte / educación física, terminales de tornillo; longitud de pelado 7 milímetros, max conductor cross-section 6 mm²
Output Ratings (SFB & BOOST are core functions)
Nominal: 24 En DC, 40 A; adjustable voltage range 18~29.5 V
Static Boost: 45 Un continuo (-25℃ ~ 40℃)
Dynamic Boost: 60 un para 5 artículos de segunda clase, to handle servo inrush current
SFB Selective Fuse Breaking peak: 215 A / 12~15 ms
Función central: Downstream branch short-circuit only trips the downstream circuit breaker, main power supply keeps running without shutdown
Residual ripple: < 50 mVpp
OVP overvoltage protection: aprox. 32 En DC
Supports parallel redundancy and series voltage boosting; multi-unit current sharing. Recommended with QUINT-ORING redundancy module.
Terminales de salida: CC+, corriente continua(tipo de tornillo); max conductor cross-section 16 mm², longitud de pelado 10 milímetros
Terminales de señal (Terminales de resorte a presión)
- DC OK: Passive relay contact 13/14, closed normally; opens when Uout < 0.9×24 V for PLC fault alarm.
- I<IN (load pre-warning): Triggers when load current drops below the set threshold; threshold editable via NFC.
- REM remote enable: Short REM to SGnd = power ON; open circuit = sleep mode (output OFF).
- NFC: Fénix QUINT POWER APP; read voltage, current and fault logs, adjust BOOST/SFB curves and export reports.
- Other Single-Phase 1AC Models (SC Screw Terminals)
12 V DC Output
| Número de pedido. | Modelo | Producción | Fuerza |
| 2904605 | QUINT4-PS/1AC/12DC/2.5/SC | 12 V 2.5 A | 30 W. |
| 2904607 | QUINT4-PS/1AC/12DC/7.5/SC | 12 V 7.5 A | 90 W. |
| 2904608 | QUINT4-PS/1AC/12DC/15/SC | 12 V 15 A | 180 W. |
5 V DC Output
| Número de pedido. | Modelo | Producción | Fuerza |
| 2904595 | QUINT4-PS/1AC/5DC/5/SC | 5 V 5 A | 25 W. |
48 V DC Output
| Número de pedido. | Modelo | Producción | Fuerza |
| 2904610 | QUINT4-PS/1AC/48DC/5/SC | 48 V 5 A | 240 W. |
| 2904611 | QUINT4-PS/1AC/48DC/10/SC | 48 V 10 A | 480 W. |
| 2904612 | QUINT4-PS/1AC/48DC/20/SC | 48 V 20 A | 960 W. |
Dual Output 2×15 V
| Número de pedido. | Modelo | Producción |
| 2904596 | QUINT4-PS/1AC/2X15DC/2/SC | 2×15 V, 2 A each |
III. Single-Phase 1AC | PT Push-In Spring Terminals (Screw-Free, same power, Número de pedido. comenzando con 2909575)
| Número de pedido. | Modelo | Producción |
| 2909575 | QUINT4-PS/1AC/24DC/1.3/PT | 24 V 1.3 A |
| 2909576 | QUINT4-PS/1AC/24DC/2.5/PT | 24 V 2.5 A |
| 2909577 | QUINT4-PS/1AC/24DC/3.8/PT | 24 V 3.8 A |
- 3-Phase 3AC Input | 24 V Models (High-power 3-phase version with identical QUINT4 SFB technology)
| Número de pedido. | Modelo | Producción | Fuerza |
| 2904620 | QUINT4-PS/3AC/24DC/5 | 24 V 5 A | 120 W. |
| 2904621 | QUINT4-PS/3AC/24DC/10 | 24 V 10 A | 240 W. |
| 2904622 | QUINT4-PS/3AC/24DC/20 | 24 V 20 A | 480 W. |
| 2904623 | QUINT4-PS/3AC/24DC/40 | 24 V 40 A | 960 W. |
- Common Series Features (Todos los modelos)
- All units equipped with SFB Selective Fuse Breaking + Dynamic Boost + NFC mobile configuration.
- SC = screw terminal; PT = Push-in spring terminal.
- Zero-clearance side-by-side mounting, parallel redundancy, DC OK dry contact alarm, REM remote ON/OFF supported.
- Direct replacement for legacy QUINT-PS series (Número de pedido. 2866xxx); pin assignment fully compatible, enchufar y usar.
- Short Purchasing List (Solo 24 V single-phase screw terminal models)
2904597 / 2904598 / 2904599 / 2904600 / 2904601 / 2904602 / 2904603
contactor,cortacircuitos,sensor,Codificador,SOCIEDAD ANÓNIMA,Convertidor




















NH42-63-318x560.png)



