PHOENIX TRIO-PS-2G/3AC/24DC/10 DIN Rail Mount Switching Power Supply

Nro. de orden: 2903154

Contacto Fénix TRIO POWER 2nd-generation three-phase DIN rail switching fuente de alimentación with Push-in spring terminals. Designed for powering PLCs, sensors and actuators inside electrical control cabinets. Widely used in machine manufacturing, líneas de producción automatizadas, HVAC and hoisting equipment.

el codigo 2901354 often appears in industry documents as shorthand; the complete official part number is 2903154.

✅ Definición del modelo

TRIO: TRIO POWER series industrial power supply

PD: Fuente de alimentación

2GRAMO: 2nd Generation

3C.A.: 3-phase AC input

24corriente continua: 24V DC output

10: Rated output current 10A

📌 Key Technical Specifications

Aporte

Clasificado: 3×400~500V AC; capable of emergency operation with 2×400~500V AC two-phase supply

Rango de operación: 3×320~575V AC

Frecuencia: 50/60Hz

Corriente de entrada: 3×0.6A @400VAC

Producción

Clasificado: 24V DC /10A (240W.)

Adjustable output: 24~28 VCC

Dynamic Boost: 15un para 5 artículos de segunda clase (to handle inrush loads of motors and capacitors)

Ripple & ruido: ≤50mVpp

OVP overvoltage protection: Output clamped ≤30V DC

Mecánico & Ambiental

Montaje: DIN 35mm rail

Dimensiones (Ancho × Alto × Fondo): 42 ×130 ×160 mm

Alambrado: Push-in screwless spring terminals

Temperatura de funcionamiento: -25℃ ~ +70℃; derating 2.5%/K above 60℃

Eficiencia: >92%

Operación paralela: Supports parallel connection for capacity expansion and redundancy; series connection for voltage boosting

Protecciones: sobrecorriente, cortocircuito, sobre temperatura, output overvoltage

Señal: Relay alarm contact (DC-OK signal)

📋 Certifications & Aplicaciones

Estándares: EN61010, UL, CE, PELV protective extra-low voltage

Aplicaciones típicas: Líneas de producción automatizadas, maquinaria de embalaje, sistemas transportadores, 24V power supply for control cabinets feeding PLC, Módulos DI/DO, sensors and solenoid valves

High MTBF, adecuado para 24/7 continuous industrial operation

⚠️ Selección & Notas de reemplazo

1. Model distinction: 2903154 is 3-phase 3AC; single-phase 1AC version is 2903149, do not mix them up
2. Alternativa doméstica: Mean Well SDR-240-24, Delta DRP-240-24 (nota: no dynamic boost capability for inrush current)
3. Redundancy solution: When paralleling two 2903154 unidades, use redundancy module such as QUINT-DIODE
4. Instalación: Maintain ≥50mm vertical clearance at top and bottom for heat dissipation; units can be mounted side-by-side with zero horizontal clearance

🛠️ Troubleshooting Guide

POWER LED off: Check 3-phase L1/L2/L3 mains supply; loss of any phase may prevent startup; verify PE earth connection

Caída de voltaje de salida / insufficient load capacity: Prioritize checking loose terminals, low input voltage and high-temperature derating

OK contact open: Sobrecorriente de salida / short circuit or internal overtemperature protection. Disconnect load and retest

Tripping on power-up due to inrush: Utilize boost feature and evaluate switching surge current

📦 HS Code for Export

8504401400 (Static converters, industrial switching power supply, for customs reference only, subject to local customs determination)

TRIO-PS-2G/3AC/24DC/10 (Número de pedido. 2903154)

Eficiencia: >92%

Test condition: 400V AC input, full rated load

Additional Power Consumption Parameters

No-load power consumption: ＜1.1 W

Power loss at rated load: ＜22 W

Nota: This value is the nominal figure from Phoenix Contact official datasheet. Actual efficiency under light load (20%~50% load) will be slightly lower than the 92% full-load rating.

TRIO-PS-2G/3AC/24DC/10 (Número de pedido. 2903154)

Dimensiones generales (Ancho × Alto × Fondo): 42 milímetros × 130 milímetros × 160 mm

📌 Installation Clearance (Critical for cabinet layout)

Horizontal sides: Zero gap side-by-side mounting allowed at ambient ≤40℃; reserve 10mm side clearance when temperature approaches 70℃

Vertical: ≥50mm clearance at top and bottom (obligatorio)

Carril de montaje: Standard NS35 DIN rail (EN60715)

Peso

Aprox.. 1.1kilos

Phoenix Contact TRIO-PS-2G Series Full Model List (TRIO POWER 2nd Generation, Push-in terminals)

Series common features: Montaje en carril DIN35, dynamic Boost (1.5×rated current for 5s), DC-OK relay alarm, parallel redundancy support, -25~+70℃, derating 2.5%/K above 60℃

1-phase Input 1AC (100~240 VCA)｜24VDC Output

3-phase Input 3AC (3×320~575VAC, rated at 3×400VAC)｜24VDC Output (Your target model group)

1-phase Input 1AC｜48VDC Output

4. Common Matching Accessories (For cabinet integration)
5. QUINT-DIODE/12-24DC/20 Redundancy diode module for dual power supply redundancy
6. CBM E4 24DC/0.5-10A NO-R 4-channel 24V electronic circuit breaker (2905743)
7. CBM E8 24DC/0.5-10A NO-R 8-channel electronic circuit breaker (2905744)

✅ Key Selection Guidelines

1. Suffix C2LPS: Only available for the 3A single-phase variant with SIL capability; not required for standard automation projects
2. 3AC three-phase models can run on two phases (L1/L2 only)
3. Width reference: 3A=30mm; 5A=36mm; 10A=42mm; 20A=65mm; 40A=120mm, cabinet layout mainly depends on width

Phoenix Contact TRIO-PS-2G Series Certification List (Including TRIO-PS-2G/3AC/24DC/10, Order No.2903154)

All models in this series share the same certification package. Only the C2LPS suffix model has extra SIL0 capability; standard models are SIL=0

✅ Global Certifications

1. CE (UE)

Low Voltage Directive LVD 2014/35/EU

EMC Directive 2014/30/EU

2. UL / cULus (UL Listed)

UL508 (Equipos de control industrial)

UL60950-1 (Information technology safety)

ANSI/ISA-12.12.01, Class I Division II Groups A/B/C/D (suitable for North American hazardous areas)

3. IECEE CB Certificate (CB scheme, foundation for multi-country certification conversion)
4. EAC Customs Union Certification (Rusia, Bielorrusia, Kazakhstan and other EAEU markets)
5. DNV GL Marine Certificate (Suitable for ship and offshore control cabinets)
6. BIS (BIS license for India market)

✅ Environmental Compliance

RoHS (UE)

ALCANZAR

WEEE compliant with waste electrical and electronic equipment directive

✅ Safety & Functional Standards (Standards ≠ Certificates; product compliance specifications)

CEI 60950-1: SELV Safety Extra-Low Voltage

EN 50178: PELV Protective Extra-Low Voltage

EN 60204-1: Safety of machinery electrical equipment (widely used for machinery)

EN 50121-4: Railway EMC standard

CEI 61508: SIL 0 (Standard models of this series; TRIO-PS-2G/1AC/24DC/3/C2LPS is specifically marked SIL0 functional safety)

Housing flammability: UL94V0

✅ EMC Electromagnetic Compatibility Standards

EN 61000-6-1 / 6-2: Inmunidad (Residencial / industrial environments)

EN 61000-6-3 / 6-4: Radiated & conducted emissions

EN 61000-3-2: Harmonic current limits

📌 Selection Remarks

1. Domestic projects: No CCC certificate, not within mandatory 3C scope. CE for EU export, UL for North America, EAC for Russia/Central Asia, DNV for marine projects.
2. SIL level: Standard TRIO-PS-2G cannot be used for SIL1 and above safety loops. If SIL higher level is required, select QUINT series SIL-rated power supplies.