Controlador todo en uno Pro-face LT3300-T1-D24-K

(PFXLT3300TADK)

Posicionamiento: LT3000 Series, 5.7″ HMI+PLC all-in-one controlador (touchscreen + control lógico integrado), Sink output type

Suffix distinction: K = Sink (salida de hundimiento); C = Source (producción de abastecimiento, LT3300-T1-D24-C)

Especificaciones básicas

Mostrar: 5.7″ color, QVGA 320×240, 65536 bandera (supports blink)

Fuente de alimentación: CC 24 V, allowable range DC19.2～28.8V

E/S: Built-in 32-point DIO (16DE / 16HACER, Sink output); 0.2un por punto, max 1.6A per common terminal; supports pulse output and high-speed counter

Comunicación: COM1 (RS232/422/485, 9-clavija D-Sub), 10/100M Ethernet RJ45, USB1.1 Host (Type-A)

Expansión: EXT1 for EX modules (arriba a 3 EX/TM3 modules); EXT2 optional CANopen master module (CA8-CANLT-01)

Dimensiones: W167.5 × H135 × D77.6 mm

Panel Cutout: W156 × H123.5 mm

Protección: Front IP65f (montaje en panel)

Capacidad del programa: máx. 15,000 logic steps; 6MB flash memory for screens

Software de programación: GP-Pro EX V3.01.200 or higher

Fin de vida & Información de reemplazo

Estado de fin de vida: LT3300-T1-D24-K order acceptance stopped, final order date: 2024-09-02; repair support until 2031-12-02

Reemplazo oficial recomendado: PFXSTC6300TADDKE (STC6300TA, Sink output)

Notas de reemplazo:

Cutout compatible for direct panel installation; slight difference in housing dimension
Resolution upgraded to VGA 640×480, screen project must be converted in GP-Pro EX
DIO pin assignment and 38-pin DIO connector are compatible, original wiring can be reused
máx. 2 TM3/EX modules directly connected to STC main unit; 3 modules require TM3XTRA1+TM3XREC1 expansion transceiver modules
STC6000 does NOT support screen blink function, blink animations in old projects need redesign
Minimum software requirement: GP-Pro EX V4.09.500+

Matching EX Expansion Modules (misma serie, also discontinued)

EXM-DDI8DT / EXM-DDI16DT Digital Input

EXM-DDO8UT / EXM-DDO16UK Sink Output

EXM-DDO8TT / EXM-DDO16TK Source Output

EXM-DRA8RT / EXM-DRA16RT Relay Output

EXM-AMI2HT / AMI4LT Analog / Entrada de temperatura

EXM-AMO1HT Analog Output

The new STC platform uses Schneider TM3 modules to replace the above EX modules

Repuestos comunes / Números de pieza

DIO Connector: CA7-DIOCN5-01

Power Connector: CA5-DCCNM-01

Mounting Clips: CA3-ATFALL-01

Waterproof Gasket: CA3-WPG6-01

USB Download Cable: CA3-USBCB-01

Troubleshooting for LT3300T Common Faults

Pantalla negra al encender: Verify DC24V ≥19.2V; backlight aging is a frequent failure for this model
Deriva táctil / no touch response: Analog resistive screen aging; touch panel can be replaced separately
No DIO output action: Distinguish Sink / Fuente, confirm common terminal wiring; check pulse/output assignment in program
Fallo de comunicación: Check COM DIP switch, protocol and station number; verify Ethernet IP and GP-Pro EX transfer key
Pérdida del programa: Backup battery failure; replace battery then re-download project + logic program

Casos de aplicación típicos de Pro-cara LT3300-T1-D24-K (HMI+PLC All-in-One)

Ventajas principales: 5.7″ screen + built-in 16DI/16DO, native pulse output & contador de alta velocidad, expandable via EX modules; one software GP-Pro EX for both screen graphics and logic programming. Suitable for small & máquinas independientes medianas, eliminates separate PLC, shrinks control cabinet and reduces wiring. K version is Sink output, compatible with most NPN sensors used domestically.

Caso 1: Vertical Form-Fill-Seal Packaging Machine (Más común)

Configuración: LT3300-T1-D24-K main unit + EXM-AMI4LT temperature module

Controlled objects: Servo film pulling, sealing heating, hopper feeding, photoelectric detection, color mark positioning, pneumatic gripper

Resource utilization: Native pulse output drives film feed servo; built-in high-speed counter reads color mark sensor; DI for material level, puerta de seguridad, parada de emergencia; DO for solenoid valves and heating contactors

HMI screens: Bag length setting, production count, sealing temperature curve, alarma de falla, recipe switching for multiple bag sizes

Comunicación: RS485 connected to temperature controllers; Ethernet uploads output and reject data to host PC

Beneficios: Single unit handles HMI and motion logic for compact control cabinet; IP65 front panel for humid food workshop; product changeover via recipe recall without program modification

Caso 2: Small Blow Molding / PET Bottle Blowing Machine

Configuración: LT3300-T1-D24-K + optional CA8-CANLT-01 Módulo maestro CANopen

Control: Mold opening/closing, blow timing, heating zone temperature control, robot pick-up, baja presión / high-pressure blow sequence

Reflejos: CANopen module connects CANopen servos and IO slaves; high-speed counter reads encoder position; interlock logic for safety door and pressure protection

HMI screens: Blow pressure curve, heating temperature, cycle time, alarm log, manual debug page

Industry feature: Bulk export machines, fewer spare part types and simple maintenance

Caso 3: Transfer Lifter / Jacking Transfer Station (Automotive Component Workstation)

Configuración: LT3300-T1-D24-K main unit, optional EX digital expansion

Control: Roller conveyor, jacking cylinder, translation servo, stop cylinder, barcode scanner signal, cortina de luz de seguridad

Lógica: Station interlock, confirmación de posición, cycle timing, NG part diversion; pulse output for translation servo positioning

Comunicación: RS485 for barcode scanner; Ethernet upload station status to MES

Valor: Independent control for single workstation, no main PLC required; easy separate commissioning and maintenance

Caso 4: Small Injection Molding Auxiliary Equipment (Granulator, Dryer Hopper, Auto Loader)

Configuración: LT3300-T1-D24-K main unit + EXM-AMI2HT analog module

Control: Admirador, suction valve, material level detection, calefacción, protección contra sobrecarga, delayed feeding

Funciones: PID drying temperature control, high/low material level alarm, automatic suction cycle, runtime maintenance reminder

Ventajas: Compact electrical box for auxiliary equipment; IP65 front panel suitable for dusty workshop

Caso 5: Small Special Machine for Grinding / Perforación

Configuración: LT3300-T1-D24-K, pulse output for feed servo, high-speed counter for spindle encoder

Control: Spindle start/stop, feed positioning, bomba de enfriamiento, clamping cylinder, límite de viaje, tool position detection

HMI screens: Feed distance, spindle speed, production count, manual jog, parameter password lock to prevent unauthorized modification

Lógica de seguridad: parada de emergencia, enclavamiento de puerta, overtravel protection; fast response via native I/O interlock

Caso 6: Small Rail-Guided AGV for Material Transport

Configuración: LT3300-T1-D24-K + CANopen module

Control: Travel drive, steering, obstacle avoidance sensors, station identification, sonido & light alarm, lifting mechanism

Características: CANopen bus for travel servo; DI for obstacle avoidance and magnetic strip station sensors; Ethernet remote monitoring of position and faults; compact panel mounted on AGV control box

Nota: Limited native I/O, additional sensors require CANopen slave I/O expansion

Caso 7: enfriador / Small Constant Pressure Water Supply Cabinet for HVAC

Configuración: LT3300-T1-D24-K + analog EX modules

Acquisition: Pressure transmitter, temperatura, nivel de liquido; DO controls water pumps, ventiladores de torre de enfriamiento, válvulas solenoides; RS485 communication with VFDs

Funciones: Constant pressure PID, pump rotation, fault backup, operation log, high/low limit alarm; remote view of pressure & temperature via Ethernet

Adecuado para: Small building supporting system or independent workshop cooling system, replaces separate HMI + micro-PLC

Caso 8: Lithium Battery Small Sorting & Test Jig

Configuración: LT3300-T1-D24-K native I/O + EX analog module

Control: Cylinder clamping, probe test, sorting gate, voltage/internal resistance sampling, OK/NG diversion

HMI screens: Test parameters, yield statistics, alarm history, barcode binding for cell ID

Características: Simple logic and short cycle, bajo costo, compact fixture layout for parallel test stations

Selección General & Notas de operación (K Version Focus)

K = Sink (NPN compatible, salida de hundimiento) : Direct match with most domestic NPN photoelectric and proximity sensors; select C version Source for PNP sensors
Max I/O scale: 16DI+16DO onboard, arriba a 3 external EX modules. Not suitable for high I/O count or multi-axis motion applications; use independent PLC + HMI instead
Pulse axis: Native pulse output for 1~2 axis simple positioning, not recommended for complex multi-axis motion
Software: GP-Pro EX handles both screen graphics and control logic; one single project file for download
EOL reminder: LT3300 discontinued; new projects use STC6300TA as replacement. Current demand is mostly spare parts and project migration for legacy machines

Unsuitable Scenarios for LT3300

Large conveyor lines, motion control over 10 ejes, massive distributed I/O, complex MES interface

PLC de seguridad / PLd safety level applications (standard I/O does not meet safety rating)

Pro-face All-in-One Controller (HMI+PLC) Lista de modelos

Notas:

K = Sink (hundimiento / salida NPN, ampliamente utilizado en China); C = Source (abastecimiento / salida PNP)

LT3000: Interrumpido; STC6000: Current main replacement for LT3000; LT4000M: New modular all-in-one

Unified programming software: GP-Pro EX

LT3000 Series (Legacy All-in-One, Interrumpido)

LT3201-A (3.8″ QVGA)

LT3201-A1-D24-K (Hundir)

LT3201-A1-D24-C (Fuente)

LT3300-T (5.7″ TFT, tu modelo objetivo)

LT3300-T1-D24-K (PFXLT3300TADK, Hundir)

LT3300-T1-D24-C (PFXLT3300TADC, Fuente)

LT3300-S (5.7″ STN Monochrome)

LT3300-S1-D24-K

LT3300-S1-D24-C

LT3300-L (5.7″ TFT Basic Version)

LT3300-L1-D24-K

LT3300-L1-D24-C

LT3301-L (5.7″ TFT, larger logic capacity)

LT3301-L1-D24-K

LT3301-L1-D24-C

LT3000 expansion: EXM I/O / analog modules; optional CANopen master module CA8-CANLT-01

STC6000 Series (Official replacement for LT3000, Active Sales)

5.7″ VGA, built-in 16DI+16DO, supports Schneider TM3 modules

PFXSTC6300TADDKE (Hundir / PNP, equivalent to LT3300-T1-D24-K)

PFXSTC6300TADDCE (Fuente / PNP, equivalent to LT3300-T1-D24-C)

LT4000M Series (Modular All-in-One, Compact 22mm cutout type)

LT4201TM (3.5″ QVGA)

Tipo digital

PFXLM4201TADDK (Hundir)

PFXLM4201TADDC (Fuente)

Tipo analógico

PFXLM4201TADAK (Hundir)

PFXLM4201TADAC (Fuente)

LT4301TM (5.7″ QVGA)

Tipo digital

PFXLM4301TADDK (Hundir)

PFXLM4301TADDC (Fuente)

Tipo analógico

PFXLM4301TADAK (Hundir)

PFXLM4301TADAC (Fuente)

LT4000M Back Expansion Modules

PFXLM4B01DDK / PFXLM4B01DDC (DIO back module)

PFXLM4B01DAK / PFXLM4B01DAC (Analog back module)

Early Legacy LT Series (Very old, GLC derivative)

GLC150 series (LT Type A/B/C/H), only spare part market available, no para nuevos proyectos:

GLC150-BG41-XY32SK-24V

GLC150-BG41-XY32KF-24V

GLC150-BG41-RSFL-24V

GLC150-BG41-ADK-24V

GLC150-BG41-ADTK-24V

Tabla de comparación de series

Serie	Estado	Pantalla	Expansion System
LT3000	Interrumpido	3.8″/5.7″	EXM Modules
STC6000	Active Sales	5.7″ VGA	TM3 Modules
LT4000M	Active Sales	3.5″/5.7″	LT4000 Back Modules