contactor,cortacircuitos,inversor solar,medidor electrico,baterias solares
Schneider GVAE20
- Interpretación del código modelo
| Segmento de código | Descripción |
| GV | Código de serie del producto, accessory of TeSys GV motor circuit breaker |
| AE | Posición de montaje & tipo; A=Auxiliary contact, E=Front Mounting |
| 20 | Configuración de contacto; 2 contactos, 0=Normally Open, namely 2NO |
Full Name: Schneider TeSys GV Series Front-mounted 2NO Instant Bloque de contactos auxiliares
- Main Technical Parameters
| Elemento de parámetro | Especificación |
| Tipo de producto | Instant Auxiliary Contact Block |
| Configuración de contacto | 2NO, instantaneous operation |
| Corriente operativa nominal | C.A.: 2.5A(240V), corriente continua: 1A(60V) |
| Tensión nominal de aislamiento | 380V y |
| Tensión operativa nominal | C.A.: 24-240V, corriente continua: 24-60V |
| Minimum Switching Current | 5mamá |
| Tipo de montaje | Front Mount, compatible with GV2/GV3 motor circuit breakers |
| Wiring Type | Screw Clamp Terminals |
| Applicable Models | GV2L, GV2LE, GV2ME, GV2P, GV2RT, GV3L, GV3P, LS1D32 |
| Dimensión | 28.956milímetros(l) × 22.5mm(W.) × 45 mm(h) |
| Peso | 0.02kilos (aprox. 20gramo) |
| Temperatura ambiente | -25°C ~ +60°C |
| Grado de protección | IP20 (Cumple con IEC 60529) |
| Número de orden | GVAE20, EAN: 3389110343465 |
| Embalaje | 10 pcs per standard pack |
- Full Series Model List
Schneider GV auxiliary contacts are divided into front-mounted GVAE and side-mounted GVAN series.
| Serie | Modelo | Tipo de contacto | Posición de montaje | Applicable Products |
| GVAE Front Mount | GVAE1 | 1NO or 1NC convertible | Frente | GV2/GV3 Series |
| GVAE11 | 1NO+1NC | Frente | GV2/GV3 Series | |
| GVAE20 | 2NO | Frente | GV2/GV3 Series | |
| GVAN Side Mount | GVAN11 | 1NO+1NC | Lado | GV2/GV3 Series |
| GVAN20 | 2NO | Lado | GV2/GV3 Series | |
| GVAD Fault Contact | GVAD1010 | 1NO alarm +1NO auxiliary | Front/Side | GV2/GV3 Series |
| GVAD0110 | 1NC alarm +1NO auxiliary | Front/Side | GV2/GV3 Series | |
| GVAD1001 | 1NO alarm +1NC auxiliary | Front/Side | GV2/GV3 Series | |
| GVAD0101 | 1NC alarm +1NC auxiliary | Front/Side | GV2/GV3 Series |
- Referencia de reemplazo entre marcas
| Modelo Schneider | ABB Equivalent | Siemens Equivalent | Eaton Equivalent | Replacement Features |
| GVAE20 (2NO, Front Mount) | 2CCS800900R0021 (S800 series, 4A) | 3RH1921-2XA22-0MA0 (Clip mount, 6A) | DILM series auxiliary contact (5A) | Identical contact layout, fit respective brand motor breakers; slight rated current difference |
Consejo de selección: 2NO front mount choose GVAE20; ABB S800, Siemens 3RH, Eaton DILM
- Fallos comunes & Soluciones
| Fenómeno de falla | Posibles causas | Soluciones |
| Contact failure | Instalación incorrecta, stuck mechanism, damaged linkage | Reinstall firmly, clean foreign matters, replace contact block |
| mal contacto | Oxidation, loose terminal, severe wear | Polish contact surface, retighten wiring, replace component |
| ablación por contacto | Overload current, frequent switching, sobretensión | Control current within 2.5A, reduce frequent operation, verify voltage range |
| Difficult installation | Model mismatch, wrong direction, broken buckle | Confirm GV2/GV3 compatibility, install as arrow direction, replace part |
- Air Transport Compliance & Certificaciones
6.1 Air Transport Compliance
No built-in lithium battery or supercapacitor, pure electromechanical component, meets international air safety standards
Cargo category: general goods, no special shipping label required
Standard anti-static packaging to avoid transit damage
6.2 Proceso de dar un título
| Proceso de dar un título | Estándar | Remark |
| Electrical Safety | CEI 60947-5-1, UL 508, CSA C22.2 No.14, CCC, CAO | Multi-country safety approval |
| Protección ambiental | RoHS, REACh, Green Premium | Hazardous substance free |
| UK Market | Reino Unido | Valid for UK sales |
| A prueba de explosiones | No aplicable | For general industrial use only |
- Application Cases & Industry Guidelines
7.1 Escenarios de aplicación típicos
Centro de control de motores (MCC): Status monitoring and control circuit expansion
Automatic production line: Motor feedback signal for PLC and HMI display
Water pump control system: Fault alarm and automatic switching
Fan control circuit: Interlock and safety protection signal output
Compressor unit: Remote monitoring and automatic start-stop control
7.2 Industry Application Guide
| Industria | Operation Feature | Consejos de selección |
| Fabricación | Arranques y paradas frecuentes, harsh environment | Match GVAE20 with GV2/GV3 for stable signal transmission |
| Petroquímico | High explosion-proof demand, severe working condition | Applied in non-explosion area with certified control cabinet |
| Automatización de edificios | Compact space, fácil instalación | Front mount saves cabinet internal space |
| Tratamiento de agua | Humid and corrosive environment | Adopt high protection grade breakers matched with GVAE20 |
| Power Industry | Alta confiabilidad, operación continua | Regular contact inspection to ensure steady signal output |
7.3 Application Case
Project: Motor Control Upgrade for Auto Parts Production Line
Requisito: Original circuit only has main circuit protection, lacking remote monitoring and early warning function
Solución: Install GVAE20 on GV2 breakers, connect 2NO contacts to PLC digital input module and HMI system
Effect:
Real-time motor running status monitoring realized
30% downtime reduction via fast fault location
Improved automation level and lower manual inspection cost
- Reglas de selección rápida
- Tipo de contacto: 2NO=GVAE20, 1NO+1NC=GVAE11, convertible contact=GVAE1
- Mounting way: Front=GVAE series, Side=GVAN series
- Compatibilidad: Exclusive for Schneider GV2/GV3 motor circuit breakers
- Current limit: Max 2.5A AC / 1A DC for control circuit
- Wiring torque: 0.8-1.2 Nm for screw terminals
