Modèle complet: QUINT4-PS/1AC/24DC/40
✅ Basic Specifications
Numéro de commande: 2904603
Série: QUINT4 (4th-generation QUINT POWER high-end alimentation)
Saisir: Single-phase 100…240 V AC
Sortir: 24 À DC, 40 UN, puissance nominale 960 W
Montage: DEPUIS 35 montage sur rail mm
Principales fonctionnalités: SFB Selective Fuse Breaking, NFC parameter configuration, free characteristic curve, wide temperature operation, pre-warning signal output
✅ Core Advantages
- SFB Selective Fuse Breaking: Only the downstream protection trips in case of branch short-circuit; the main power supply remains online without lockout, widely used in automated production lines.
- NFC Interface: Read parameters, adjust voltage, set alarm thresholds and export reports directly via mobile APP.
- Parallel redundancy supported, suitable for high-power control cabinets, PLC clusters and servo power supply.
- Zero-clearance side-by-side installation; no extra heat dissipation gap required.
✅ Cross-References & Remplaçants
Previous generation: QUINT-PS/1AC/24DC/40 (Numéro de commande. 2866789, abandonné); 2904603 is the direct upgraded replacement.
Lower-power models in the same series: 2904597, 2904598, 2904599, 2904600, 2904601, 2904602.
✅ Brief Specification Summary
| Article | Paramètre |
| Type d'entrée | 1-phase CA, wide-range AC/DC compatible |
| Sortir | 24 À DC, 40 UN |
| Puissance nominale | 960 W |
| Classe de protection | IP20 |
| Température de fonctionnement | -25 ℃ ~ +60 ℃ |
| Communication | NFC |
✅ Common Matching Accessories
Redundancy module: QUINT-ORING
UPS unit: QUINT-UPS 24 série V
QUINT4-PS/1AC/24DC/40 (2904603) Full Technical Data
- Core Datasheet (English Version)
Numéro de commande: 2904603 | Série: QUINT4 high-end power supply with SFB | Single-phase input, 24 V 40 UN, 960 W
Notes d'entrée
Tension alternative: 100~240 V CA (-15% ~ +10% tolérance), stable operation from 85~264 V AC
DC input compatible: 90~300 V DC (≤250 V DC per UL standard)
Gamme de fréquence: 45~65 Hz
Built-in slow-blow input fuse: 20 UN
Terminaux: L / N / PE, bornes à vis; longueur de dénudage 7 mm, section maximale du conducteur 6 mm²
Output Ratings (SFB & BOOST are core functions)
Nominal: 24 À DC, 40 UN; adjustable voltage range 18~29.5 V
Static Boost: 45 A continuous (-25℃ ~ 40℃)
Dynamic Boost: 60 Un pour 5 secondes, to handle servo inrush current
SFB Selective Fuse Breaking peak: 215 UN / 12~15 ms
Fonction principale: Downstream branch short-circuit only trips the downstream circuit breaker, main power supply keeps running without shutdown
Residual ripple: < 50 mVpp
OVP overvoltage protection: environ. 32 À DC
Supports parallel redundancy and series voltage boosting; multi-unit current sharing. Recommended with QUINT-ORING redundancy module.
Bornes de sortie: CC+, CC(à vis); section maximale du conducteur 16 mm², longueur de dénudage 10 mm
Signal Terminals (Bornes à ressort enfichables)
- DC OK: Passive relay contact 13/14, closed normally; opens when Uout < 0.9×24 V for PLC fault alarm.
- I<IN (load pre-warning): Triggers when load current drops below the set threshold; threshold editable via NFC.
- REM remote enable: Short REM to SGnd = power ON; open circuit = sleep mode (output OFF).
- NFC: Phénix QUINT POWER APP; read voltage, current and fault logs, adjust BOOST/SFB curves and export reports.
- Other Single-Phase 1AC Models (SC Screw Terminals)
12 Sortie V CC
| Numéro de commande. | Modèle | Sortir | Pouvoir |
| 2904605 | QUINT4-PS/1AC/12DC/2.5/SC | 12 V 2.5 UN | 30 W |
| 2904607 | QUINT4-PS/1AC/12DC/7.5/SC | 12 V 7.5 UN | 90 W |
| 2904608 | QUINT4-PS/1AC/12DC/15/SC | 12 V 15 UN | 180 W |
5 Sortie V CC
| Numéro de commande. | Modèle | Sortir | Pouvoir |
| 2904595 | QUINT4-PS/1AC/5DC/5/SC | 5 V 5 UN | 25 W |
48 Sortie V CC
| Numéro de commande. | Modèle | Sortir | Pouvoir |
| 2904610 | QUINT4-PS/1AC/48DC/5/SC | 48 V 5 UN | 240 W |
| 2904611 | QUINT4-PS/1AC/48DC/10/SC | 48 V 10 UN | 480 W |
| 2904612 | QUINT4-PS/1AC/48DC/20/SC | 48 V 20 UN | 960 W |
Dual Output 2×15 V
| Numéro de commande. | Modèle | Sortir |
| 2904596 | QUINT4-PS/1AC/2X15DC/2/SC | 2×15 V, 2 A each |
III. Single-Phase 1AC | PT Push-In Spring Terminals (Screw-Free, same power, Numéro de commande. en commençant par 2909575)
| Numéro de commande. | Modèle | Sortir |
| 2909575 | QUINT4-PS/1AC/24DC/1.3/PT | 24 V 1.3 UN |
| 2909576 | QUINT4-PS/1AC/24DC/2.5/PT | 24 V 2.5 UN |
| 2909577 | QUINT4-PS/1AC/24DC/3.8/PT | 24 V 3.8 UN |
- 3-Phase 3AC Input | 24 V Models (High-power 3-phase version with identical QUINT4 SFB technology)
| Numéro de commande. | Modèle | Sortir | Pouvoir |
| 2904620 | QUINT4-PS/3AC/24DC/5 | 24 V 5 UN | 120 W |
| 2904621 | QUINT4-PS/3AC/24DC/10 | 24 V 10 UN | 240 W |
| 2904622 | QUINT4-PS/3AC/24DC/20 | 24 V 20 UN | 480 W |
| 2904623 | QUINT4-PS/3AC/24DC/40 | 24 V 40 UN | 960 W |
- Common Series Features (Tous les modèles)
- All units equipped with SFB Selective Fuse Breaking + Dynamic Boost + NFC mobile configuration.
- SC = screw terminal; PT = Push-in spring terminal.
- Zero-clearance side-by-side mounting, parallel redundancy, DC OK dry contact alarm, REM remote ON/OFF supported.
- Direct replacement for legacy QUINT-PS series (Numéro de commande. 2866xxx); pin assignment fully compatible, prêt à l'emploi.
- Short Purchasing List (Seulement 24 V single-phase screw terminal models)
2904597 / 2904598 / 2904599 / 2904600 / 2904601 / 2904602 / 2904603
Contacteur,disjoncteur,capteur,Encodeur,API,Convertisseur




















NH42-63-318x560.png)



