SHAKO PU520-02S-DC24V Électrovanne pneumatique

Marque: SHAKO (Taïwan) | 5/2 Way, Single Solenoid, Internal Pilot Pneumatic Électrovanne

✅ Définition du code modèle

PU520: 5/2 five-port two-position soupape

02: Main port G1/4″; Exhaust port G1/8″

S: Solénoïde unique (retour à ressort, monostable)

DC24V: Coil voltage DC24V (Order code No.9)

Standard thread: G thread; Facultatif: TNP / RC

Suffix L = with LED indicator

📌 Spécifications techniques de base

📎 Matching Parts & Alternatives

1. Manifold base: MF520-02 (multi-station manifold available)
2. Energy-saving upgrade: E-PU520-02S-DC24V, lower power consumption and less heat rise for long-term energization
3. Cross-brand equivalent models:

Arctique: 4V210-08 DC24V

Mindman: MVSC-220-4E1 DC24V

⚠️ Remarques importantes

Single solenoid design: auto return when power off. Select PU520-02D (double solénoïde) for latching function without power supply.

Internal pilot requires minimum inlet pressure ≥ 0.15 MPa. Select external pilot type PU520A for low-pressure or vacuum applications.

Standard DIN43650 socket; LED version with suffix L is optional.

Complete Technical Datasheet — SHAKO PU520-02S-DC24V

Nom et prénom: PU520-02-S DC24V 5/2-Way Internal Pilot Single Solenoid Valve (PU Series Pilot Valve)

Original PDF source: SHAKO official PU520 series catalogue

1. Codage du modèle

PU520 02 S DC24V

PU520: 5/2 five-port two-position pilot solenoid valve

02: Main air port G1/4″; Exhaust port G1/8″

S: Solénoïde unique, retour à ressort (auto reset on power loss)

DC24V: Coil voltage DC24V

Thread default: G; Optional Rc (TP), TNP; Suffix L = with LED indicator

2. Caractéristiques du produit
3. Medium-size body with large flow capacity, effective area 18 mm²
4. Equipped with lockable manual override, no electricity or air supply needed for field test
5. Anodized aluminum body, wear-resistant and long service life
6. DIN43650 standard socket, IP65 protection suitable for industrial sites
7. Can be mounted on manifold or with individual base
8. Optional energy-saving coil E-PU520-02S-DC24V, low power and low temperature rise
9. Rated Technical Data

⚠️ Do not use this internal pilot model under low pressure or vacuum; choose PU520A-02S (external pilot) instead

4. Définition du port (5/2 Way)

P.: Entrée (G1/4)

UN: Sortir 1 (G1/4)

B: Sortir 2 (G1/4)

R., S: Two exhaust ports (G1/8)

De-energized state: P ↔ A open; B ↔ S exhaust

Energized state: P ↔ B open; A ↔ R exhaust

Auto reset to P-A open when power cuts off (single solenoid characteristic)

5. Bobine & Câblage (DC24V DIN43650)

Pin definition: 1(+), 2(-), Terre PE

Non-polarized coil version: bornes 1 & 2 can be swapped; LED version is polarized – wrong polarity only causes indicator off without damaging the valve

Consommation d'énergie: Standard coil ≈4.8W; E energy-saving coil ≈1.2W

Cable outer diameter: Φ6～Φ8mm; use waterproof cable gland

Grounding is mandatory; install full sealing gaskets for dusty & splash environments

6. Overall & Dimensions de montage (PU520-02-S)

Largeur du corps: 26 mm

Trous de montage: 2×Φ4.3; hole spacing: 70 mm

Hauteur hors tout (avec bobine & douille): environ. 100 mm

Longueur totale: environ. 130 mm

Deux options de montage:

1. Montage sur collecteur: fixed on MF520-02 (recommended for multi-valve centralized control)
2. Individual pipe mounting: with separate base

Manifold MF520-02 supports 2~10 stations, with blanking plugs and mufflers optional

7. Installation, Mise en service & Operation Rules

Installation

1. Install air filter (≥40μm) en amont; air treatment triple unit is recommended; no oil & dirt contamination allowed
2. No strict mounting orientation; keep coil facing upward to avoid water accumulation
3. Purge all piping before connecting the valve to prevent metal chips jamming the spool
4. Install mufflers on exhaust ports for noise reduction and dust prevention; never block exhaust ports

Manual Override Button

Press down: force spool to shift; rotate 90° to lock the shifted position for continuous testing

Réinitialiser: turn back to unlock; spring resets automatically after release

Manual lock is only for commissioning; do not keep locked during normal operation

Power-on Commissioning Sequence

1. Supply compressed air up to rated pressure and check for air leakage
2. Apply DC24V power and verify cylinder movement; check LED lamp (L model)
3. Cut power to confirm automatic spring reset
4. Troubleshooting List

9. Liste des pièces de rechange
10. Manifold base: MF520-02 (1-gare), MF520-02-XX (multi-station)
11. DIN socket: Standard socket / LED indicator socket
12. Muffler: BSL-M5 / BSL-01 (fits G1/8 exhaust port)
13. Blanking plugs, joints, separate coil assembly
14. Isolation block SOB52-02: Replace valve without shutting down main air supply (online maintenance without line stop)
15. Modèles équivalents multimarques

Arctique: 4V210-08 DC24V

Mindman: MVSC-220-4E1 DC24V

Chélique: SV-5201 DC24V

Note: Mounting hole pitch and base are not interchangeable; only function & port size match

11. Calendrier d'entretien

Normal environment: Blow exhaust ports and check air leakage every 3 mois

Dust/humid environment: Inspection mensuelle; disassemble & clean spool and inspect NBR seals every 6 mois

Durée de vie du joint: Environ. 5 million switching cycles; replace seal kit before reaching cycle limit

Working Principle — SHAKO PU520-02S-DC24V

5/2 five-port two-position, solénoïde unique, internal pilot solenoid valve

Principe de base: The coil only actuates a small pilot valve; air pressure difference from main supply pushes the main spool to shift; spring resets automatically when power cuts off (not direct pull by coil like direct-acting valves)

Structure interne

1. Solenoid assembly (Bobine DC24V + armature): controls the small pilot valve
2. Pilot air circuit: internal pilot, air is tapped from P inlet; no external control air required
3. Main spool & ressort de retour
4. Five ports: P. (entrée), A/B (outlets), R/S (exhausts)

Key limitation: Internal pilot needs minimum inlet pressure ≥0.15 MPa (1.5 bar) to build pressure difference for spool actuation; select PU520A external pilot for low-pressure & vacuum applications

1. De-energized State (Normal Position, Retour du printemps)

Bobine hors tension, armature drops, pilot valve closes; pilot control chamber vents

Right-side return spring pushes main spool to left

Air circuit: P ↔ A open; B ↔ S exhaust

Cylinder A side air inlet, B side exhaust; cylinder stays at initial position

2. Energized State (DC24V Powered On)

Bobine alimentée, magnetic force pulls armature up; pilot valve opens

Compressed air from P inlet flows through pilot hole into right-side control chamber

Pressure on right side overcomes spring force; air pressure pushes main spool to shift

Air circuit switches: P ↔ B open; A ↔ R exhaust

Cylinder B side air inlet, A side exhaust; cylinder reverses movement

3. Power Cut Off Again

Magnetic force disappears, pilot valve closes; air inside pilot chamber vents out from pilot exhaust hole

Main spool is pushed back to original position by return spring; air circuit reverts to P-A open status

✅ Feature of single solenoid (S): auto reset on power loss (monostable); select double solenoid (D) for position latching without power supply.

Manual Override Principle

The lockable manual push button mechanically actuates the pilot spool without power or air supply, simulating energized status for field commissioning. Rotate 90° to lock the shifted position; remember to unlock after testing.

Advantages over Direct-Acting Valves

Low coil power (≈4.8W), petite taille, low temperature rise

Large spool flow capacity (18 mm² effective area)

Prise en charge 100% continuous energization (100% ED)

Inconvénient: Minimum actuating pressure threshold; cannot work under zero pressure

Air Circuit Logic Summary

SHAKO Solenoid Valve Full Series Catalogue (Par fonction & Taille)

Note: Unité centrale, SUIS, BM, PC, PS, CY = pneumatic directional control valves (5/2,5/3,3/2); PU220/SPU220/PU225 = 2/2 fluid valves (air, eau, huile); Prefix E = energy-saving low-power coil

Suffix General Definition

S: Solénoïde unique (retour à ressort, monostable)

D: Double solénoïde (verrouillage, no power hold)

UN: External pilot (vide & low-pressure use)

B: Built-in silencer

X/Y: 5/3-way mid-position function (X=closed center; Y=exhaust center; Z=pressurized center)

L: With LED indicator

E: Bobine à économie d'énergie

Port code: 01=G1/8; 02=G1/4; 03=G3/8; 04=G1/2

1. 5/2 2-Position 5-Port / 5/3 3-Position 5-Port Pilot Solenoid Valves (Main cylinder control)

AM520 Series (18mm narrow body, G1/8 port, equivalent to Airtac 4V110)

AM520-01S / AM520-01D (5/2 single/double solenoid)

AM530X/Y-01D (5/3 closed/exhaust/pressurized center)

AM520A: External pilot; AM520B: Built-in silencer

Matching manifold: MF520-01

BM520 Series (22mm largeur, Port G1/4, equivalent to Airtac 4V210)

BM520-02S / BM520-02D

BM530X/Y-02D (5/3 three-position)

BM520A: External pilot; E-BM520: Energy-saving version

Matching manifold: MFB520-02

PU520 Series (Your selected medium size, 26mm largeur, grand débit, G1/4~G1/2)

PU520-02S/D, PU520-03S/D, PU520-04S/D (5/2 two-position)

PU530X/Y-02D, PU530X/Y-03D, PU530X/Y-04D (5/3 three-position)

PU520A: External pilot (vacuum/low pressure); PU520AB

E-PU520: Bobine à économie d'énergie (faible puissance & feu doux)

Matching manifold: MF520-02 / MF520-03 / MF520-04

BW520 Series (Wide body high flow, G3/8 & G1/2, equivalent to 4V410)

BW520-03S/D, BW520-04S/D

BW530X/Y-03D, BW530X/Y-04D

PS520 Series (ISO standard mounting, ISO1/ISO2 interchangeable base)

PS520-02S/D, PS520-03S/D, PS520-04S/D

PS520F: ISO flange mounting

E-PS520: Energy-saving model

CY520 / CY525 Series (Economical pilot valves)

CY520-02S/D, CY520-03S/D

E-CY520, E-SCY520 (SUS316 stainless steel anti-corrosion version)

CY525: Combiné 3/2 + 5/2 fonction

1. 3/2 3-Port 2-Position Pilot Solenoid Valves (Single-acting cylinder, vide & contrôle du soufflage)

PU320 / PU322N: 3/2 pilot type, port 01/02/03/04

BM320: 3/2 vanne pilote

E-AM325: Energy-saving direct-acting 3/2 soupape

III. 2/2 2-Port 2-Position Solenoid Valves (Fluid control: air, eau, huile, vapeur, corrosive low-pressure media)

Direct-acting / pilot-operated; brass body / SUS316 stainless steel; normalement fermé (Caroline du Nord) en standard

1. PU220A Direct-acting (basse pression & vacuum applicable)

PU220A-01/02/03/04/06/08

2. SPU220AR SUS316 stainless steel direct type, anti-corrosion for air & eau

SPU220AR-01/02/03; E-SPU220AR energy-saving version

3. PU225X Pilot-operated 2/2 (high pressure large flow, maximum. 50 bar)

PU225X-03/04/06/08

4. PU225S Steam-specific 2/2 soupape; flange type PU225SF
5. DC220 Large-bore 2/2 soupape (3/4″~3″, dust removal & approvisionnement en eau)
6. Modèles spéciaux

E-SPU520: SUS316 stainless steel 5-port pilot valve for corrosive environment

Explosion-proof coil optional: Compatible with PU/BM/PS series, ATEX T4 certified

Pneumatic pilot valves (no solenoid): PA520, PB520, PP520, same body size as solenoid versions

1. Selection Cross Reference Table

1. Manifold Naming Rule

MF520-02-03: PU520 series, G1/4 thread, 3-collecteur de gare; MFB520 = dedicated manifold for BM520 series