Contattore,interruttore automatico,inverter solare,contatore elettrico,batterie solari
- Core Specifications of the Modello originale (Eltra EH80P1000Z5L16)
| Parametro | Specifica |
| Tipo di prodotto | Encoder rotativo incrementale (through-bore hollow shaft) |
| Outer Diameter | φ80 mm |
| Risoluzione | 1000 P/R (1000 impulsi per giro) |
| Tipo di uscita | Line Driver (marked as Z5) |
| Tipo di albero | Through-bore hollow shaft (common bore sizes: 10 mm or 15 mm) |
| Montaggio | Anti-rotation pin mounting, suitable for servo motors |
| Tensione di alimentazione | 5–28 V DC |
| Grado di protezione | Up to IP54 |
| Applicazione | Feedback control systems for medium and large AC servo motors |
- Recommended Omron Equivalent Models
2.1 Best Functional Match: E6B2-CWZ1X 1000P/R
| Parametro | Specifica | Compatibilità |
| Tipo di uscita | Line Driver | ★★★★★ |
| Risoluzione | 1000 P/R | ★★★★★ |
| Outer Diameter | φ40 mm (smaller than original) | ★★☆☆☆ |
| Tipo di albero | Albero solido (6 mm or 8 mm) | ★★☆☆☆ |
| Tensione di alimentazione | 5 A DC | ★★★☆☆ |
| Grado di protezione | IP50 | ★★★☆☆ |
| Codice ordine campione | E6B2-CWZ1X 1000P/R 0.5M | – |
2.2 Hollow Shaft Replacement: E6H-CWZ1X 1000P/R
| Parametro | Specifica | Compatibilità |
| Tipo di uscita | Line Driver | ★★★★★ |
| Risoluzione | 1000 P/R | ★★★★★ |
| Outer Diameter | φ40 mm (smaller than original) | ★★☆☆☆ |
| Tipo di albero | Albero cavo (bore size: 8 mm) | ★★★★☆ |
| Tensione di alimentazione | 5–12 V DC | ★★★★☆ |
| Grado di protezione | IP50 | ★★★☆☆ |
| Codice ordine campione | E6H-CWZ1X 1000P/R 0.5M | – |
2.3 High-Protection Replacement: E6C3-CWZ6C 1000P/R
| Parametro | Specifica | Compatibilità |
| Tipo di uscita | Push-Pull (similar to Line Driver) | ★★★★☆ |
| Risoluzione | 1000 P/R | ★★★★★ |
| Outer Diameter | φ50 mm (smaller than original) | ★★★☆☆ |
| Tipo di albero | Albero solido (8 mm) | ★★☆☆☆ |
| Tensione di alimentazione | 12–24 V DC | ★★★★☆ |
| Grado di protezione | IP65f (olio- and water-resistant) | ★★★★★ |
| Codice ordine campione | E6C3-CWZ6C 1000P/R 2M | – |
- Model Replacement Recommendations
- Function-Prioritized Replacement: Select E6B2-CWZ1X 1000P/R
(Codice ordine: E6B2-CWZ1X 1000P/R 0.5M/1M/2M)
Fully matches line driver output and 1000 P/R resolution
Suitable for most industrial applications requiring position/speed feedback
Nota: Outer diameter φ40 mm (smaller than original), albero solido (coupling required)
- Hollow Shaft Mounting-Prioritized Replacement: Select E6H-CWZ1X 1000P/R
(Codice ordine: E6H-CWZ1X 1000P/R 0.5M/1M)
Hollow shaft design, no coupling needed, easier installation
Line driver output supports long-distance signal transmission (fino a 100 M)
Nota: Outer diameter φ40 mm (smaller than original), bore size 8 mm (adaptation may be needed)
- Harsh Environment Replacement: Select E6C3-CWZ6C 1000P/R
(Codice ordine: E6C3-CWZ6C 1000P/R 2M)
IP65f protection, oiland water-resistant, ideal for harsh industrial environments
Push-pull output with high compatibility, can replace line driver
Nota: Outer diameter φ50 mm (smaller than original), albero solido
- Note importanti
- Omron does not offer an identical φ80 mm outer diameter hollow shaft encoder; the closest alternatives are φ40 mm and φ50 mm series.
- Line driver output (Z5) corresponds to the “1X” suffisso (E6B2-CWZ1X) O “3X” suffisso (E6H-CWZ3X) in Omron models.
- Hollow shaft bore sizes may differ (originale: tipicamente 10 mm/15 mm; Omron E6H-C series: 8 mm)-verify mounting compatibility.
- Supply voltage must match: line driver output typically requires 5 A DC, while push-pull output supports 12–24 V DC.
- Guida alla selezione
Choose the most suitable replacement based on your application:
Standard industrial use: E6B2-CWZ1X 1000P/R (function-matched, conveniente)
Direct mounting on servo motors: E6H-CWZ1X 1000P/R (hollow shaft, installazione conveniente)
Wet, dusty or oily environments: E6C3-CWZ6C 1000P/R (IP65f protection, high durability)
