ABB ACS580-01-087A-4 Variable Frequency Drive

The ACS580-01-087A-4 is a standard wall-mounted single drive unit from ABB’s ACS580 series, rated for three-phase 380–480V AC input. This drive series features user-friendly operation, high reliability and superior energy efficiency as core advantages. Multiple standard built-in functions eliminate the need for extra optional components, enabling rapid commissioning and deployment. Widely compatible with general industrial loads such as pumps, tifosi, conveyors and mixers, it is the preferred solution for light industry, building HVAC, water treatment and other applications.

Breakdown of Model Code

Per ABB official naming convention, each segment of the model designation is defined as follows:

ACS580: Identificatore della serie di prodotti, representing ABB’s general-purpose standard drive series covering power ratings from 0.75kW to 500kW

-01: Construction type, standing for wall-mounted standard single drive. Standard equipment includes IP21 enclosure rating, Assistant Control Panel, built-in Class C2 EMC filter, Coppia di sicurezza disattivata (STO), braking chopper and triple-protection coated circuit boards

-087UN: Rated output current marking, indicating the nominal rated output current of the drive is 87A

-4: Classe di tensione, denoting three-phase 380V–480V AC input, compatible with 50/60Hz mains power grids

Specifiche tecniche principali

Electrical Ratings

Parametro	Specifica	Osservazioni
Intervallo di tensione in ingresso	3-phase AC 380V ~ 480V	Tolerance: +10% / -15%
Frequenza di ingresso	50/60Hz	Tolerance: ±5%
Corrente di uscita nominale	87UN	Nominal value for light-duty applications
Potenza motore abbinata (Light Duty)	45kW	For variable-torque loads (tifosi, pompe dell'acqua)
Potenza motore abbinata (Servizio pesante)	37kW	For constant-torque loads (trasporto, mixing)
Gamma di frequenze di uscita	0 ~ 500Hz	Supports high-speed motor operation
Input Power Factor	≥0.98	High power factor across full power range
Overall Efficiency	≥98%	At rated operating conditions
Capacità di sovraccarico	150% corrente nominale per 60s	One overload cycle permitted every 10 minuti
Capacità di sovraccarico	110% rated current continuously	One overload cycle permitted every 10 minuti

Controllare & Interface Specifications

Motor Control Modes: Scalar V/F control, controllo vettoriale sensorless; compatible with induction motors, permanent magnet synchronous motors and synchronous reluctance motors

Dimensioni fisiche & Specifiche ambientali

Dimensioni del telaio: R5

Dimensioni complessive (H × W × D): 896mm × 345mm × 293mm

Peso netto: ca. 23kg

Valutazione della custodia: IP21 (standard); IP55 high-protection version available as option

Tipo di montaggio: Montaggio a parete, side-by-side compact installation supported

Operating Ambient Temperature: -15℃ ~ +50℃ (declassamento richiesto sopra i 40 ℃)

Magazzinaggio & Transport Temperature: -40℃ ~ +70 ℃

Umidità relativa: 5% ~ 95%, senza condensa

Altitude Rating: Full power output up to 1000m; 1% power derating per additional 100m above 1000m

Codice SA: 85044088

Configurazione standard & Accessori opzionali

Factory Standard Equipment

ACS-AP-S Assistant Control Panel (Chinese language supported)
Built-in Class C2 EMC Filter
Integrated Braking Chopper
Coppia di sicurezza disattivata (STO) Funzione
Triple-protection Coated Printed Circuit Boards
Bottom Cable Entry Compartment
Multilingual Quick Installation & Manuale di messa in servizio

Common Optional Accessories

Enclosure Upgrade: IP55 protective enclosure, flange mounting kit

Communication Extensions: Fieldbus adapters including Profibus DP, Profinet IO, Ethernet/IP, ModBus TCP

Electrical Options: Input reactors, output reactors, du/dt filters, sine-wave filters, braking resistors

Functional Extensions: I/O expansion modules, temperature sensor interface cards, NETA-21 remote monitoring module

Software Tools: Drive Composer professional commissioning software

Scenari applicativi tipici

Industria del trattamento delle acque: Clean water pumps, sewage pumps, aeration fans, sludge mixers

Building HVAC: Pompe per acqua refrigerata, cooling water pumps, supply & exhaust fans for central air conditioning

Light Manufacturing: Trasportatori a nastro, packaging production lines, mixing & attrezzature per la miscelazione, compressori d'aria

Metallurgia & Estrazione mineraria: Dust extraction fans, material transport belts, mine drainage pumps

Municipal Engineering: Water supply pumping stations, ventilation systems for wastewater treatment plants

Common Troubleshooting Matrix

Fenomeno di guasto	Root Causes	Step-by-Step Remedial Actions
Overcurrent Trip (Codice errore 0001)	Short circuit in motor/cables, sudden load surge, overly short acceleration time	1. Cut power and test insulation & wiring of motor and power cables
		2. Appropriately extend acceleration time parameter
		3. Verify consistency between motor rated parameters and drive settings
DC Overvoltage Trip (Codice errore 0002)	Excessively high mains voltage, overly short deceleration time, faulty braking circuit	1. Measure input mains voltage to confirm it falls within allowable range
		2. Extend deceleration time or enable DC braking function
		3. Check wiring and resistance value of braking resistor for matching
Scatto per sottotensione (Codice errore 0003)	Single-phase power loss, blown input fuses, excessively low mains voltage	1. Inspect three-phase input power to eliminate phase loss issues
		2. Check status of input fuses / interruttori automatici
		3. Confirm on-site mains voltage meets equipment requirements
Motor Overload Alarm (Codice errore 0005)	Jammed mechanical load, incorrect motor parameters, sustained overload operation	1. Cut power and rotate motor shaft manually to check mechanical smoothness
		2. Re-run motor identification auto-tune
		3. Evaluate actual load conditions and upsize drive model if necessary
Guasto di surriscaldamento (Codice errore 0009)	Temperatura ambiente eccessivamente elevata, blocked cooling air ducts, faulty cooling fan	1. Clear dust buildup on drive air intake cooling grille
		2. Verify normal operation of cooling fan
		3. Improve cabinet ventilation and lower ambient temperature

Detailed List of Standard Accessories for ABB ACS580-01-087A-4 (Frame R5 / IP21 Version)

This model is a standard wall-mounted unit of ACS580 Frame R5. Factory supply contents are split into built-in onboard functions and physical accessories supplied in carton. Below is a detailed breakdown of the official standard supply scope:

Standard Built-in Onboard Functions (Integrato, No Extra Fitting Required)

All functions below are factory pre-configured and ready for direct use without purchasing extra options:

EMC Components: Built-in Class C2 EMC filter to meet industrial site electromagnetic compatibility requirements
Braking Circuit: Integrated braking chopper allowing direct connection of braking resistors for fast deceleration
Funzione di sicurezza: Coppia di sicurezza disattivata (STO) compliant with PL e / SIL 3 livello di sicurezza
Protezione ambientale: Full triple-protection coating on control and power boards, resistant to humid, dusty and corrosive gas environments
Standard Control Interfaces: 6 ingressi digitali, 2 uscite digitali, 2 ingressi analogici, 1 uscita analogica
Basic Communications: Embedded RS-485 hardware port with native Modbus RTU protocol support
Progettazione strutturale: Bottom cable entry compartment supporting standardized wiring and cable ingress protection
Physical Standard Carton Accessories (Separately Packed Inside Shipment Box)

Independent accessories available upon unpacking for installation and basic commissioning:

ACS-AP-S Assistant Control Panel (Chinese version): Equipped with LCD screen and full-function keys for parameter setup, status monitoring and fault diagnosis; pluggable onto drive front panel and supplied in separate packaging
Wall Mounting Template: 1:1 paper drilling positioning template for marking mounting hole positions on-site to reduce drilling errors
Cable Junction Box Assembly: Standard for Frame R5 IP21 units, including power cable grounding brackets, control cable shielding clamps and assembly fasteners
Mounting Fastener Kit: Bulloni M6, nuts and other metal hardware for wall mounting fixation
Ground Terminals & Cable Crimp Accessories: Dedicated main circuit grounding terminals and auxiliary crimp fittings for control terminals

III. Supplied Documentation & Identification Labels

Quick Installation and Startup Guide: Multilingual edition (including Chinese) covering full procedures of wiring, power-up and basic commissioning
Safety Warning Stickers: Multilingual residual voltage warning labels to be affixed near equipment to alert maintenance personnel
Product Certificate of Conformity and Warranty Document

Nota: Full hardware manuals and firmware parameter manuals are not supplied as standard; downloadable via ABB official website or available as separate printed copies upon order.