ABB TTH200-Y0 Temperature Transmitter

TTH200: ABB TTH200 series DIN-rail mount temperature transmitter (Head Mount / DIN rail dual mounting, Protocollo HART)

Y0: Versione / codice di configurazione, stands for without local display, basic model, HART 4-20mA output, Montaggio su guida DIN.

Series positioning: The TTH200 is a 2-wire HART temperature transmitter from ABB. It accepts RTD, TC, mV and resistance signals, and serves as a replacement for the discontinued TTF200.

Specifiche chiave

Alimentazione elettrica: 12～42V DC, 2-filo

Produzione: 4–20mA + HART 5/7

Sensor Inputs:

RST: Pt100, Pt1000, Cu50, ecc. Supports 2/3/4-wire connection

TC: B,E,J,K,l,N,R,S,T,U and other thermocouple types

Millivolt mV, resistance signal

Precisione: RTD typical ±0.05℃; Thermocouple typical ±0.08℃

Montaggio: Montaggio su guida DIN; also can be installed inside sensor connection head (head mount)

Alloggiamento: Custodia in plastica, IP20 (under DIN rail installation)

Configurazione: HART communicator, ABB Device Manager, DTM/FDT software

Suffix code Y0: No local LCD display, basic version without extra hardware options.

Confronto: Y1 = with LCD display

Applicazioni tipiche

Industrial temperature measurement for HVAC, chimico, power and pharmaceutical industries. Used for temperature acquisition on pipelines and tanks, connected to DCS or PLC, paired with Pt100, K-type thermocouples.

Selezione del modello & Sostituzione

1. Stessa serie: TTH200-Y1 (con display)
2. Legacy model replacement: TTF200 → TTH200
3. Alternativa domestica: HART DIN rail temperature transmitters (such as Chongqing Chuanyi, Shangrun HART models)

Risoluzione dei problemi comuni

1. Nessuna uscita: Verify loop voltage ≥12V, check 2-wire wiring for short circuit and polarity
2. Fixed at 4mA: Sensor open circuit / non connesso, mismatched configured sensor type (per esempio. Pt100 configured while K thermocouple wired)
3. Deriva della temperatura: Check RTD wiring (4-wire preferred), cold junction compensation setting for thermocouple
4. HART communication failure: 250Ω resistor inserted into loop, avoid high-power interference, verify HART address

Pezzi di ricambio & Note sull'acquisto

Complete order number is not limited to TTH200-Y0; extra codes for sensor type, explosion protection are required

Explosion-proof versions have separate suffixes; TTH200 has intrinsically safe Ex ia variants, confirm explosion-proof requirement before purchase

HS code reference: 90268000 (Temperature transmitter, industrial measuring instrument)

ABB TTH200 Complete Ordering Selection Table

Order model structure: TTH200 [Explosion-proof code] [Display code] + [Additional options]

Esempi: TTH200-Y0 = Non-explosion proof, without LCD; TTH200-S1-Y0 = NEPSI intrinsically safe, without LCD

1. Explosion Protection / Certification Code (1st suffix segment)

2. Display Code

✅ Combination example: TTH200-Y0 (non-explosion proof no display); TTH200-E1-Y1 (ATEX intrinsically safe + schermo LCD)

3. Alloggiamento / Mounting Accessory Options (added separately, incompatible with some explosion-proof models)

⚠️ Nota: Some explosion-proof models cannot be matched with H1/H2/H3 head housing options. Confirm before order.

4. Functional Additional Options

5. Supported Sensor Input Selection (configured in software, stated in order remarks)

RTD Resistance Temperature Detector

Pt100(IEC60751 0.00385)【Default】、Pt100(JIS)、Pt10、Pt50、Pt200、Pt500、Pt1000；Ni50/Ni100/Ni120/Ni1000；Cu10/Cu100；Resistance signal 0~500Ω / 0~5000Ω; support 2/3/4-wire

Thermocouple TC

K、J、T、E、N、R、S、B、l(DIN43710)、U、C、D；mV signal: -125~125mV / -125~1100mV

Cold junction compensation: Integrato(predefinito) / external cold junction / no compensation (B-type thermocouple recommended no compensation)

6. Specifiche Tecniche Generali

7. Complete Ordering Examples
8. TTH200-Y0

Non-explosion proof, nessun display LCD, Montaggio su guida DIN; configured Pt100, range 0~200℃

2. TTH200-S1-Y1+CS

NEPSI intrinsically safe, con display LCD, SIL2 declaration; K-type thermocouple, built-in cold junction compensation

3. TTH200-E1-Y0+H2

ATEX intrinsically safe, nessun display LCD, polyester IP65 head housing, head mount Pt100

8. Note sulla selezione
9. Y0/Y1 are display codes, NOT explosion-proof codes, a common confusion. For TTH200-Y0, Y0=no display; the preceding Y means non-explosion proof.
10. DIN rail installation only needs transmitter body + DIN rail clip kit, no H1/H2 head housing. H-series housings are used for sensor head mounting inside temperature probe junction box.
11. Confirm hazardous area classification (Zone/Div) and temperature class T6 for explosion-proof models; NEPSI S1 version is preferred for domestic hazardous projects.
12. Measurement range, sensor type and TAG are configuration parameters, submit in order remarks for factory pre-configuration; or configure on-site via HART communicator after delivery.
13. Cross Series Replacement Reference

TTH200: Single channel, no sensor drift monitoring (questo modello)

TTH300: Doppio canale, support sensor redundancy and drift monitoring, prestazioni più elevate

Legacy TTF200: Interrotto, direct replacement by TTH200-Y0/Y1

ABB TTH200 Full Model List (Head Mount / DIN Rail Dual Purpose Temperature Transmitter)

Model structure: TTH200-[Explosion-proof code]-[Display code] [+Additional options]

Serie base: TTH200 (single channel, HART 4-20mA); TTH300 (dual channel) in same family listed at the end for distinction

1. TTH200 Base Model List (Combination of Explosion Protection & Display)

1. Additional Options (appended after any model with `+`)

Example complete order number: `TTH200-S1-Y0+CS+H2`

Senso: NEPSI intrinsically safe, nessuna visualizzazione, SIL2 declaration, polyester IP65 head housing

III. TTH / TTF Family Comparison (Avoid Selection Mistakes)

1. Common Technical Features of TTH200 Series
2. Ingresso universale: RST / TC / OH / mV, configured in software, not coded in model number, state in order remarks
3. 2-filo: 12~42VDC, 4-20mA+HART5/HART7
4. NAMUR NE89, NE107 fault alarm
5. Two mounting forms: Guida DIN (transmitter module only); Sensor head mount (transmitter + H-series housing kit)
6. Purchasing Remarks

Y0/Y1 always as the last segment: Y0 no display, Y1 with LCD; preceding code for explosion-proof / regional certification

H-series housing is additional option, not part of base model; H housing not required for DIN rail installation

SIL(CS) is compliance declaration without hardware modification; add suffix `+CS` for SIL2 safety loop application

Allineare, sensor type, TAG are configuration parameters, not embedded in model code, add to order remarks for factory pre-configuration