Contattore Schneider LC1E400

Schneider LC1E400 is a 400A high-current Contattore CA belonging to the EasyPact TVS series. Specifically designed for industrial applications, it is used to control electric motors, lighting equipment, and other high-power loads.

Parametri fondamentali

Duty Cycles and Applications

Main Duty Cycles:

– AC-3: Used for starting and stopping squirrel-cage motors, which is the most common industrial application.

– AC-1: Used for controlling non-inductive or slightly inductive loads, such as resistance heating equipment.

Scenari applicativi tipici:

– Sistemi di controllo del motore (gamma di potenza: 220kW@415V a 280kW@690V)

– Control of AC loads with a power factor ≥0.95

– Apparecchiature per l'automazione industriale

– Master switch control for lighting systems

– Other industrial applications requiring high-current switching

Caratteristiche Tecniche

Vantaggi prestazionali:

– High making and breaking capacity: Capable of withstanding a making current of 4000A and a breaking current of 3200A (440V e)

– Short-time withstand current: 3600UN (≤40°C, 10 secondi), enhancing system reliability

– Ampio intervallo operativo di tensione: The control coil operates stably within 85%~110% of the rated voltage, does not actuate below 70%, and releases reliably within 35%~50%

– Low power consumption design: Only 15VA required in the holding state, reducing energy consumption

– High anti-interference capability: Withstands 8kV impulse voltage, adatto per ambienti industriali difficili

Caratteristiche strutturali:

– Two installation methods: base mounting or DIN rail mounting, facilitating on-site deployment

– Cablaggio del circuito principale: Can connect 2×150mm² cables or 30×5mm copper busbars, with a tightening torque of 35N·m

– Circuito di controllo: Bolt-fastened terminals, capable of connecting 1~4mm² wires, with a torque of 1.2N·m

– Progettazione modulare, allowing addition of accessories such as auxiliary contacts and overload protection

Model Coding Explanation

LC1E400X7:

– LC1: Standard prefix for Schneider contactors

– E: EasyPact TVS series

– 400: Rated current of 400A

– X: Codice tensione bobina

– F: 110V CA 50/60 Hz

– M: 220V CA 50/60 Hz

– Q: 380V CA 50/60 Hz

– N: 415V CA 50/60 Hz

– 7: Suffisso, indicating standard type (50/60Hz)

Nota: The LC1E40004 series is a 4-pole version (4NO) with a rated current of 60A (AC-1), mainly used in special control circuits.

Application Recommendations

1. -Punti chiave della selezione: Choose the appropriate duty cycle based on the load type (AC-3 for motor control, AC-1 for resistive loads)

2. Environmental Considerations: The installation location should be well-ventilated, with an ambient temperature not exceeding 55°C

3. Supporting Protection: It is recommended to use it with appropriate overload protection devices (such as thermal relays) to protect the motor and the contactor itself

4. Selezione del cavo: For the main circuit, select cables with sufficient cross-sectional area (≥150mm²) to ensure low-impedance connection

5. Ciclo di manutenzione: Ispezionare regolarmente lo stato dei contatti; a comprehensive inspection and cleaning at least once a year is recommended

Riepilogo

The Schneider LC1E400 is a reliable and efficient industrial-grade contactor. With its 400A high-current handling capacity and robust design, it has become an ideal choice for motor control and high-power load management in various industrial applications. For more detailed technical parameters or special application solutions, it is recommended to refer to the official Schneider Electric manual or