Schneider LC1E630U7 AC Contactor

The domestic full model designation is commonly LC1E630U7N. Discontinued in April 2021. It is a 3-pole high-power AC contactor.

✅ Model Code Definition

LC1E: EasyPact TVS AC contactor series

630: AC-3 rated operational current of 630 UN

U: Tensione della bobina 240 V e

7: 50/60 Hz universal AC coil

N: Domestic version with CCC certification (Overseas model LC1E630U7 does not carry suffix N)

This unit has no built-in auxiliary contacts. Auxiliary contacts require add-on accessories.

📋 Core Electrical Specifications

Articolo	Parametro
Numero di poli	3P, 3NESSUN contatto principale
Utilisation category	AC-3 (carichi motori), AC-1 (carichi resistivi)
AC-3 Ie	630 UN (@ ≤440 V, 55 °C)
AC-1 Ith	1000 UN (@ 40 °C)
Tensione nominale di isolamento Ui	690 V
Tensione nominale di tenuta ad impulso Uimp	8 kV
Coil rated voltage Uc	240 V e, 50/60 Hz
Coil operating range	Raccolta: 0.85~1.1 × Uc; Ritirarsi: 0.25~0.5 × Uc
Inrush power consumption	1650 VA; Hold power consumption: 22 VA
Potenza motore compatibile	220 V: 185 kW 380/400 V: 335 kW 440 V: 400 kW 690 V: 450 kW
Rated short-time withstand current Icw	5050 UN / 10 S
Fabbricazione / Potere di interruzione	Fabbricazione: 6300 UN; Rottura: 5040 A @440 V

🛠 Mechanical & Endurance Characteristics

Resistenza meccanica: 4 milioni di cicli

AC-3 electrical endurance: 600,000 cicli; AC-1: 200,000 cicli

Maximum operating rate: 1200 cicli/ora

Tempo di funzionamento: Closing 40~80 ms; Opening 100~200 ms

Montaggio: Plate mount (high-current frame does not support standard DIN rail)

Coppia di serraggio: Circuito principale 58 N·m; Circuito di controllo 1.2 N·m

Dimensione complessiva: W309 × H304 × D255 mm; Peso netto: 18.6 kg

Classe di protezione: IP00

Temperatura operativa ambiente: -5 ~ +55 °C; No derating up to altitude 3000 M

📌 Typical Applications

Ventilatori ad alta potenza, pompe dell'acqua, compressori d'aria, frantoi, large motor starter cabinets, low-voltage switchgear; AC-3 squirrel-cage motor start-stop control, switching of heavy resistive loads.

⚠️ Discontinuation & Opzioni di sostituzione

LC1E630U7N discontinued in April 2021, no new original production. Azione / second-hand units available on market.

Schneider OEM replacement: LC1G630KUEC (TeSys Giga series, 630 UN, 240 VAC compatible coil)
Alternativa domestica: CJX2-F630, NC2-630, ecc. (Verificare la tensione della bobina, temperature rise and short-time withstand current)

🧰 Optional Accessories

Blocco contatti ausiliari: LA1KN (add-on 1NO+1NC)

Coil surge suppressor, interblocco meccanico, terminal shroud, relè termico (large frame LRD series)

📎 Inspection Checklist for Second-hand Acceptance

Measure coil resistance and compare with reference value for same model; power on to test pull-in / drop-out, nessun grippaggio o rumore anomalo
Inspect main contact surface for ablation or welding; check consistency of contact resistance across three phases
Dielectric strength test: 2.5 kV / 1 min between phases and main circuit to earth
Verify terminal tightening torque; inspect busbar contact surface for oxidation and overheating discoloration
Test operating voltage: Reliable pull-in at 0.85Uc, reliable drop-out below 0.5Uc

LC1G630KUEC VS LC1E630U7 Parameter Comparison Table

LC1E630U7: EasyPact TVS, interrotto; LC1G630KUEC: TeSysGiga, OEM replacement. KU = 100~250 V AC/DC wide-range coil (compatible with original 240 VCA).

Parametro	LC1E630U7	LC1G630KUEC	Osservazioni
Serie di prodotti	EasyPact TVS (Easy TeSys)	TeSysGiga	Schneider new generation high power contactor
Model definition	3P, AC-3 630 UN, bobina 240 V e, 50/60 Hz	3P, AC-3 630 UN, 100~250 V AC/DC wide coil	Giga AC/DC universal coil, direct replacement for U7 (240VCA) without control circuit modification
Stato del prodotto	Discontinued Apr 2021, azione / second-hand	In produzione, genuine new
Poli / Contatti principali	3P, 3NO	3P, 3NO
AC-3 rated Ie @≤440V	630 UN (55 °C)	630 UN	Identical rating for motor loads
AC-1 conventional thermal current Ith @40 °C	1000 UN	1050 UN	Giga higher resistive load capacity
Tensione nominale di isolamento Ui	690 V	1000 V	Giga upgraded insulation
Tensione nominale di tenuta ad impulso Uimp	8 kV	8 kV	Identico
Rated short-time withstand current Icw	5050 UN /10 S	5050 UN /10 S; 4400 UN /30 S	Same 10s withstand; Giga superior long-duration withstand
Making capacity @440V	6300 UN	7220 UN	Giga higher short-circuit making capability
Breaking capacity @440V	5040 UN	5550 UN
Contatti ausiliari incorporati	Nessuno, LA1KN add-on required	1NO+1NC built-in	No need to purchase auxiliary contact block for retrofit
Tipo di bobina	Solo aria condizionata, 240 V, 50/60 Hz	Wide-range AC/DC 100~250 V	Compatible with AC and DC control supply, better engineering flexibility
Coil operating range	Accoglienza:0.85~1.1Uc Drop-out:0.25~0.5Uc	Accoglienza:0.8~1.1Ucmin~Ucmax Drop-out: ≤0.45Uc	Wider voltage tolerance for grid fluctuation
Consumo energetico della bobina	Spunto 1650 VA; Hold 22 VA	Spunto 800 VA; Hold 15 VA	Much lower coil power, less cabinet heat
Resistenza meccanica	4 milioni di cicli	5 milioni di cicli	25% improvement
AC-3 electrical endurance	600,000 cicli	1 milioni di cicli	Significant improvement under motor duty
Maximum operating rate	1200 cicli/ora	AC-3: 600 cicli/ora	LC1E better for frequent cycling; LC1G sufficient for standard motor applications
Tempo di funzionamento	Close 40~80 ms; Open 100~200 ms	Close 40~70 ms; Open 15~50 ms	Giga faster opening
Temperatura ambiente	-5 ~ +55 °C	-25 ~ +60 °C	Giga supports low-temperature startup
Classe di protezione	IP00	IP2X with shroud	Finger-safe protection
Dimensione(L×A×P)	309 × 304 × 255 mm	211 × 284 × 266 mm	~32% narrower, consente di risparmiare spazio nell'armadio
Peso netto	18.6 kg	14.2 kg	4.4 kg lighter for easier handling
Main circuit tightening torque	58 N·m	58 N·m	Busbar torque unchanged, busbars can be reused
Control circuit torque	1.2 N·m	Push-in spring terminal	Tool-free control circuit connection
Montaggio	Plate mount	Plate mount	Mounting hole pattern incompatible, base plate re-drilling required
Power dissipation per pole (AC-3)	48 W	26 W	Lower contact loss, less temperature rise
Motor power AC-3 @400V	335 kW	335 kW	Identical motor rating
Extra features	Basic contactor	Optional contact wear diagnosis, interblocco meccanico, feedback sullo stato	Predictive maintenance available for critical loads

✅ Replacement Summary

Main circuit rating fully equivalent: Adatto per 335 kW, 400 V motor. Keep busbar torque at 58 N·m; Mounting hole layout differs, base plate re-drilling required.
Control circuit advantage: LC1G630KUEC wide-range 100~250 V AC/DC coil works directly with original 240 VAC control supply; lower coil power and built-in 1NO+1NC auxiliary contacts, no auxiliary accessory purchase.
Limitazione: Max operating rate reduced to 600 cicli/ora. Applications with frequent inching or high cycle count need evaluation.
Temperature rise & affidabilità: Giga higher insulation voltage, lower contact loss and wider ambient temperature range, ideal for critical continuous-duty loads.

⚠️ Engineering Replacement Risk Notes

Originale 240 V AC control supply can connect directly to LC1G630KUEC coil.

Do not replace directly for heavy inching / frequent reversing >600 cicli/ora; performance review mandatory.

Much narrower frame width; existing busbars and protective baffles need rework.

LC1G630KUEC (TeSysGiga) Industria & Load Application Guide

LC1G630KUEC: AC-3 630 UN, rated for 335 kW three-phase squirrel cage motor at 400 V. Built-in contact wear diagnosis, wide-range AC/DC coil and IP2X shroud. Designed for high-power motor start-stop, star-delta starters and heavy resistive load switching. Max operating rate 600 cicli/ora, not recommended for high-frequency inching.

🏭 1. Acqua & Acque reflue (Acquedotto, Sewage Plants, Pumping Stations)

Typical loads: Large raw water pumps, pompe di sollevamento delle acque reflue, circulating pumps, sludge pumps, ventilatori di aerazione, main drive motors for scrapers.

Caratteristiche: 24/7 continuous operation requiring high reliability. LC1G supports -25 °C low temperature operation and contact wear diagnosis for predictive maintenance. Widely used in MCC pump cabinets and the most common retrofit candidate replacing LC1E630U7.

🌬️ 2. Grande HVAC, Centri dati & Complessi commerciali

Typical loads: Chiller compressors, large cooling tower fans, primary / secondary chilled water pumps, building exhaust fans.

Caratteristiche: Building MCC switchgear, frequent start-stop and elevated cabinet ambient temperature. Giga Ui=1000 V high insulation and low temperature rise; wide coil accommodates building supply voltage fluctuation.

⚙️ 3. Metallurgia, Estrazione mineraria & Materiali da costruzione

Typical loads: Frantoi, mulini a sfere, heavy belt conveyors, kiln blowers, hoist motors (derating required for AC-4 duty).

Caratteristiche: Heavy shock loads and dusty harsh environment; strong short-time withstand and short-circuit capacity. AC-4 hoist duty limited to max 150 cicli/ora, derating mandatory during selection.

🛢️ 4. Petrolchimico & Energia (Olio & Gas, Solare, Energia eolica)

Typical loads: Process pumps, compressori, thermal oil furnace blowers, wind turbine yaw / pitch large motors, high-power resistive load switching for PV systems.

Caratteristiche: Mounted outside explosion-proof enclosures, prone to supply voltage fluctuation. Wide-range 100~250 V AC/DC coil with high control supply compatibility; Marine certification available for auxiliary motor circuits on offshore platforms.

📦 5. Carta, Pulp, Cibo & Farmaceutico

Typical loads: Paper machine main fans, pompe per vuoto, large agitator motors, drying resistive heating loads (AC-1).

Caratteristiche: Continuous production with zero unscheduled downtime tolerance. Contact wear diagnosis enables advance replacement planning.

🏗️ 6. Infrastrutture & Railway Auxiliary Systems

Typical loads: Tunnel exhaust fans, station large water pumps, refrigeratori, port crane auxiliary drives, terminal conveying equipment.

Caratteristiche: Preferred choice for project-type MCC panel builders; compatible with star-delta starter schemes with LA9G mechanical interlock accessory.

🧱 7. OEM Panel Builders & System Integrators

Panel builders: Low voltage Motor Control Centre (Centro clienti), large motor starter cabinets, star-delta starter panels, soft starter bypass contactors (Bypass duty breaking capacity assessment required).

✅ Load Category Compatibility Summary

AC-3 (Primary use): Normal start-stop squirrel cage motors (pompe, tifosi) ✅Preferibile

AC-1: Resistive heating, resistive load switching, Ith=1050 A ✅

AC-4: Motor plugging / reverse braking, inching (hoists etc.), derating required and strict operating frequency limits ⚠️

AC-6a: Commutazione del banco di condensatori, capacitor dedicated protection required; direct use not recommended

⚠️ Key Selection Limitations

Max AC-3 operating rate: 600 cicli/ora. Applications with higher frequency (inching, frequent reversing) are not recommended; LC1E630U7 is preferred.
Operating ambient: -25 °C~ +60 °C, wider temperature range than legacy LC1E630U7.
Mounting hole pattern incompatible with LC1E; cabinet base plate re-drilling required for retrofit.
Marine type approval available for vessel applications.