Chint NB1-63/1PC63 ミニチュアサーキットブレーカー (MCB) - コンタクタ,サーキットブレーカー,ソーラーインバーター,電気メーター,太陽電池

微信: +86-13184948252 ワッツアップ: 0086-13811255435 電子メール: kent@bestcontactor.com

について 接触 |

Chint NB1-63/1PC63 ミニチュアサーキットブレーカー (MCB) - コンタクタ,サーキットブレーカー,ソーラーインバーター,電気メーター,太陽電池

サーキットブレーカー/

Chint NB1-63/1PC63 ミニチュアサーキットブレーカー (MCB)

Chint NB1-63/1PC63 is a miniature circuit breaker (MCB) と 1 ポール (1P), a rated current of 63A, and a Type C tripping curve. It belongs to Chint’s NB1 product series and is suitable for circuits with AC 50Hz and a rated voltage of 230/400V, mainly used for overload and short-circuit protection. I.Core Parameters and Functions 1. 基本 ...

  • 製品詳細

Chint NB1-63/1PC63 is a ミニチュアサーキットブレーカー (MCB) と 1 ポール (1P), a rated current of 63A, and a Type C tripping curve. It belongs to Chint’s NB1 product series and is suitable for circuits with AC 50Hz and a rated voltage of 230/400V, mainly used for overload and short-circuit protection.

I.Core Parameters and Functions

1. 基本仕様

Pole Count: 1P (1 ポール), controls only the live wire; the neutral wire is connected directly.

– 定格電流: 63あ, suitable for high-power load circuits, such as air conditioners and electric water heaters.

– トリッピングカーブ: タイプC, applicable to lighting and general inductive loads. The instantaneous tripping range is 5-10 定格電流の倍 (つまり, 315-630あ), which can quickly cut off the circuit in case of a short circuit.

– 遮断容量: 6の, which can effectively cut off the short-circuit current in the line to ensure safety.

– 定格電圧: 230/400Vと, compatible with single-phase and three-phase systems.

2. Safety Features

Complies with standards such as GB/T 10963.1 およびIEC 60898-1, and has obtained certifications including CCC and CE, 信頼できる品質を確保する.

Equipped with overload long-delay protection and short-circuit instantaneous protection functions, which can replace traditional fuses.

The shell is made of high flame-retardant plastic, providing excellent fire resistance. The terminal blocks are designed with anti-misinsertion features to improve installation safety.

Ⅱ. Installation and Application

1. 設置方法

Adopts standard TH35-7.5mm DIN rail installation, compatible with common distribution boxes for easy installation.

The terminal blocks support a maximum 16mm² copper conductor, with a tightening torque of 2.0N·m to ensure a stable connection.

2. アプリケーションシナリオ

– 住宅用配電: Can be used as the main incoming circuit breaker or branch protection for high-power appliances (such as air conditioners and ovens).

Commercial and Industrial Use: Suitable for circuit protection of loads like lighting and small motors, especially in places where the required short-circuit breaking capacity does not exceed 6kA.

3. 環境適応力

– 温度範囲: -35℃~+70℃, but derating is required when the ambient temperature exceeds 30℃. 例えば, when the ambient temperature is 60℃, the rated current needs to be reduced to 53.2A (correction factor: 0.84).

– 高度制限: Can be used normally below 2000m altitude; derating is required above 2000m (例えば, 2500メートルで, the current is reduced to 56.7A with a correction factor of 0.9).

Ⅲ. Price and Purchase Recommendations

1. 市場価格

Referring to quotes from e-commerce platforms and distributors, the unit price of NB1-63/1PC63 is usually between 11-37 人民元, and may drop to around 10 RMB during promotional activities.

It is recommended to purchase through Chint’s official channel (ワッツアップ: 0086-13811255435) 製品の品質とアフターサービスを保証するため.

2. 代替モデル

For higher breaking capacity (例えば, 10の), the NB1-63H series (such as NB1-63H/1PC63) can be selected.

For residual current protection function, it can be matched with the NB1LE-63 series residual current operated circuit breakers (such as NB1LE-63 1P+N C63).

Ⅳ. Usage Precautions

1. モデルの選択とマッチング

The rated current should be calculated based on the load power to ensure the circuit breaker capacity is greater than the actual load current. 例えば, a 63A circuit breaker is suitable for circuits with a maximum power of approximately 14.5kW (230V×63A).

Avoid using NB1-63/1PC63 in DC circuits; the NB1-63DC series should be selected for DC scenarios.

2. 設置仕様

Power must be cut off before installation, and wiring should be completed by a professional electrician to ensure correct polarity (only controls the live wire).

Regularly check the status of the circuit breaker. If contact ablation or frequent tripping is found, replace it in a timely manner.

V. Certification and Technical Support

Certification Information: Has obtained certifications including CCC, CE, and VDE, complies with international standards, and can be used in most regions around the world.

– 技術文書: Product manuals, installation guides, and certification certificates can be downloaded from Chint’s official website to obtain detailed parameters and usage instructions.

前へ:

次:

返信を残す

伝言を残す