The V8 series HMI 廃止されました. It is widely used on legacy equipment (例えば, Toshiba injection molding machines), featuring a 10.4-inch analog resistive industrial touchscreen.
モデルコードの定義
V810: V8 series, 10.4-inch model
私: Built-in LAN Ethernet port (V810iCN has no optional expansion unit port)
C: Standard VGA (640×480) economy version
N: Analog resistive touch panel
080: DC24V power supply variant (suffix D also stands for DC24V; AC models have no such suffix)
コアハードウェア仕様
画面: 10.4″ TFTカラー液晶, 640×480VGA, 65,536 色
Touch type: アナログ抵抗膜タッチ
バックライト: 導かれた, rated service life approx. 70,000 時間
メモリ: 4.5MB FROM for screen storage; 128KB SRAM (for recipes & alarm logs)
Front panel protection: IP65 (with original waterproof gasket), rear side IP20
全体の寸法: 303.8 × 231.0 × 69.0 mm
Panel cutout size: 289.0 × 216.2 mm (+0.5/-0 許容範囲)
Rear Interface List
- LAN RJ45: 10/100Mbps Ethernet
- MJ1, MJ2 (8-pin modular): RS232/485
- D-Sub9 (CN1): RS232C / RS422/485
- USB-A (Host), USB-B (Programming slave port)
- CF card slot (legacy CF card, not SD card)
- 24VDC power terminal block
注記: V810iCN does NOT support GU video/RGB optional modules
ソフトウェア & コミュニケーション
プログラミングソフトウェア: V-SFT-5 / V-SFT-6 (V-SFT6 supports V8, V9 and V10 series simultaneously)
8-way multi-protocol communication: まで接続します 8 PLCs of different brands simultaneously (三菱, シーメンス, オムロン, デルタ, 温度コントローラー, インバータ, 等)
サポートされている機能: アラーム, trend graphs, recipe management, macro scripts, PLC ladder transfer, USB printing, CF card backup for screens & logs
交換オプション (Discontinued Model Upgrade)
- Official Series Upgrade: V1010iC (10.4-インチ, identical cutout; project conversion via V-SFT automatic tool) – Top priority for direct replacement
- Domestic HMI Replacement: 10.4-inch local HMIs. Requires redeveloping project screens and reconfiguring communication protocols.
重要なお知らせ: V8→V10 project conversion is irreversible. Always back up the original project before conversion.
一般的な障害 & メンテナンスのヒント
Typical failures: Unresponsive touch, touch offset, black screen, backlight failure, communication loss, unreadable CF card
スペアパーツ: Touch panel, LEDバックライト, power board, CFカード, backup battery for SRAM
Maintenance note: Legacy CF cards are difficult to source. Use USB for program upload/download whenever possible.
Hakko MONITOUCH V8 Series (Hakko Electronics / 富士電機) 全モデルリスト
The entire V8 series is end-of-life (EOL).
サフィックス 説明
私: Built-in LAN Ethernet port; no i = no Ethernet port
S: High-performance model, supports GU RGB video optional modules
T: Mid-range model
C: Standard economy model (V810iCN belongs to this branch)
M: Simplified model exclusive to V806
CH: 7.5-inch handheld type
×: 15-inch XGA high-end model
N: アナログ抵抗膜タッチ; D / 080: DC24V電源
5.7-インチ | V806 Series (320×240QVGA)
V806M / V806iM
V806C / V806iC
V806T / V806iT
Power variants: V806iCD, V806iTD, V806iMD (DC24V)
7.5-インチ | Handheld Model V808CH
V808CH / V808i
8.4-インチ | V808 Series (640×480VGA)
V808C / V808iC
V808S / V808iS
Power variants: V808iCD, V808iSD (DC24V)
10.4-インチ | V810 Series (640×480VGA, your target model here)
V810C / V810iC (エコノミー版; V810iCN-080 falls here; iC version cannot install GU video modules)
V810T / V810iT (ミッドレンジ, supports GU optional units)
V810S / V810iS (高性能, supports GU video/RGB modules)
Suffix variants: N (抵抗膜タッチ), D/080 (DC24V), 例えば, V810iCN, V810iTN, V810iSN
12.1-インチ | V812 Series (800×600SVGA)
V812S / V812iS (高性能, supports GU video modules)
15-インチ | V815 Series (1024×768XGA)
V815iX (V8 series flagship; イーサネット + video input)
Function Comparison Table
| Model Branch | Built-in LAN (私) | GU Video Module Support | 位置決め |
| V8xxC (V810iC/V808iC) | Optional i | ❌ | 経済 (standard for injection molding machines) |
| V8xxT (V810iT) | Optional i | ✅ | Mid-range general purpose |
| V8xxS (V810iS/V812iS/V808iS) | Optional i | ✅ | 高性能 |
| V815iX | ✅ | ✅ | 15″ XGA top model |
| V806M | Optional i | ❌ | 5.7-inch entry-level |
| V808CH | Optional i | ❌ | 7.5-inch handheld |
Optional Units (For V8i models with expansion port, excluding V810iC)
GU-00/01/02/03/10/11: RGB video input units; DUN-10: V806 dedicated expansion unit
ソフトウェア & 交換
プログラミングソフトウェア: V-SFT5 / V-SFT6
Official upgrade series: V10 series (V1010iC is the preferred drop-in replacement for V810iCN, same cutout size; one-click project conversion in V-SFT6)
Replacement Model List for V810iCN-080 (Hakko MONITOUCH)
Key specs of original unit: 10.4-インチ, DC24V, 内蔵イーサネット, エコノミーグレード, no video expansion port, cutout size: 289.0 × 216.2 mm
- Original Brand Upgrade (第一選択: プロジェクトの移行, No Cutout Modification)
(1) V10シリーズ (Current Fuji/Hakko Mainstream, Official Recommended Replacement)
V1010iC-D (Top Pick)
✅ Identical panel cutout; キャビネットの改造は必要ありません. V-SFT6 automatically converts V8 project files.
✅ Equipped with LAN, serial ports and USB; SD card replaces legacy CF card.
⚠️ Resolution upgraded from 640×480 to 800×600; screens auto-scale with minor control adjustments needed. Converted projects cannot be opened again on V8 software.
V1010iS-D (High-end Alternative)
Supports video input with higher performance, same cutout dimensions for future video expansion needs.
(2) V9シリーズ (Transitional Discontinued Model, Only Stock Available)
V9100iC (Official designated replacement for V810iC series)
Project migration via V-SFT6. Stock availability is limited; not the first choice.
(3) V8 Series Spare Replacement (Only for Used Secondhand Parts, Not for New Purchases)
V810iTN-080 / V810iSN-080
同じ概要 & cutout size; extra video expansion port. The original V810iCN cannot fit GU modules, while iTN/iSN support video add-ons. Project files can be downloaded directly without modification.
- Domestic HMI Replacement (Project Reconfiguration Required)
Selection criteria: 289×216mm cutout, 10.4-インチ, DC24V, イーサネット + RS485/232 ports
ウェインテック: MT8106iP / MT8106iE (Check cutout carefully; adapter plate may be needed)
Kunlun Tongtai: TPC1061Ti (Verify cutout dimensions)
Kinco / 新ジェ: Most 10.4-inch high-end models require custom adapter panels or cabinet re-cutting.
短所: V-SFT project files cannot be imported directly; full re-configuration and communication debugging required.
Selection Comparison Table
| 代替機種 | No Cutout Modification | Direct Project Migration | Video Module Support | 供給状況 |
| V1010iC-D | ✅ | ✅ (V-SFT6 conversion) | ❌ | Commercially available |
| V1010iS-D | ✅ | ✅ | ✅ | Commercially available |
| V9100iC | ✅ | ✅ | ❌ | 製造中止, only stock/used |
| V810iTN/080 | ✅ | ✅ | ✅ | 製造中止, secondhand only |
| Domestic 10.4″ HMI | Adapter plate may be needed | ❌, full re-programming | Depends on model | Abundant stock |
Critical Migration Notes
- Back up the original V8 project file before conversion; V8→V10 conversion is irreversible.
- Recipes and alarm logs stored on the original CF card must be exported and imported separately after migration.
- 通信プロトコル (Mitsubishi MC, シーメンス S7, Omron Hostlink, 等) are fully compatible with V10; protocol parameters remain almost unchanged.
- Terminal pin assignments, 24V power and serial pinouts differ. Always cross-check the V10 manual before wiring.
コンタクタ,サーキットブレーカー,センサー,エンコーダ,PLC,コンバータ






















NH42-63-318x560.png)



