OMRON CP1W-8ER Pure Output Expansion Module - コンタクタ,サーキットブレーカー,センサー,エンコーダ,PLC,コンバータ

微信: +86-13184948252 ワッツアップ: 0086-13811255435 電子メール: kent@bestcontactor.com

について 接触 |

OMRON CP1W-8ER Pure Output Expansion Module - コンタクタ,サーキットブレーカー,センサー,エンコーダ,PLC,コンバータ

PLC/

OMRON CP1W-8ER Pure Output Expansion Module

CP1W: Expansion unit for CP1 series 8: 8 points E: Expansion R: Relay normally open (いいえ) output Type: Pure output expansion module, no input points Core Specifications Number of output points: 8-point relay NO output Rated current per channel: 2 あ (抵抗負荷) Output voltage range: AC/DC 4.5~30 V (passive relay contact) On/off delay: 約. ...

  • 製品詳細

CP1W: Expansion unit for CP1 series

8: 8 ポイント

E: 拡大

R: Relay normally open (いいえ) 出力

タイプ: Pure output expansion module, no input points

コア仕様

Number of output points: 8-point relay NO output

チャンネルあたりの定格電流: 2 あ (抵抗負荷)

Output voltage range: AC/DC 4.5~30 V (passive relay contact)

On/off delay: 約. 15 MS

消費電力: 5 ワシントンDCで 0.21 あ; 24 ワシントンDCで 0.13 あ

寸法: W66 × H90 × D50 mm

重さ: 約. 250 g

認証: CE, UL, CSA

ライフサイクルステータス: アクティブ, not discontinued

互換性がある CPU 単位

CP1E / CP1H / CP1L (CP1 series PLC); also compatible with legacy CPM1A/CPM2A

注記: 20-point CP1E CPU does not support expansion. Only 30/40/60-point CPUs can connect CP1W expansion units.

Cross-model Comparison (選択用)

CP1W-8ER: 8-ポイントリレー出力 (passive, AC/DCユニバーサル)

CP1W-8ET: 8-ポイント NPNトランジスタ出力 (DC24Vのみ)

CP1W-8ED: 8-ポイント DC24V 入力モジュール

CP1W-16ER: 16-ポイントリレー出力

配線ガイドライン

  1. Two independent common terminals: COM0 (00~03), COM1 (04~07)
  2. Relay is dry contact: connect AC L / DC+ to COM as required, then wire the load to the contact terminal
  3. Do not drive high-power motors directly; add intermediate contactors
  4. 誘導負荷の場合 (電磁弁, コイル), install freewheeling diodes (直流) or RC snubbers (交流) to extend relay life.

トラブルシューティング

出力アクションなし:

1) Check if the expansion cable is firmly plugged in and the CPU recognizes the expansion unit

2) Verify the I/O address assignment (expansion I/O follows the previous unit’s address sequentially)

3) Measure COM power supply and check for open circuits in the load loop

Permanent ON for one channel: relay contact welding; replace the point or the whole module

No output on all channels: expansion function disabled, too many expansion units, or damaged cable.

交換オプション

  1. 直接交換: CP1W-8ER (好ましい, no program modification needed)
  2. Transistor alternative: CP1W-8ET (for high-frequency switching and DC loads; cannot handle AC)
  3. 国内代替品: CP1-bus compatible 8-point relay expansion module (verify bus protocol and address mapping)

Service Life of CP1W-8ER (Limited by relay contacts)

Official rated life per relay channel

  1. 機械的寿命 (無負荷運転): ≥20 million operations
  2. 電気的寿命 (2 A resistive load): ≥100,000 回の操作

キーポイント: Electrical life is the bottleneck, not the PCB. 誘導負荷 (電磁弁, 接触器コイル) drastically shorten service life down to 20,000~50,000 cycles. Snubber circuits will improve this.

Time Estimation (for project evaluation)

1 operation per minute: 100,000 cycles ≈ 19 年

1 operation per 10 秒: 100,000 cycles ≈ 2.8 年

1 operation per second: 100,000 cycles ≈ 27 時間

For equipment with continuous ON state and rare switching: contact wear is minimal. In clean, temperature-controlled cabinets, the PCB, cable and terminals can run stably for 8~15 years. Service life is halved in high-temperature, 湿気やほこりの多い環境.

Two Types of Service Life

Contact life: limited by switching cycles; failure symptoms: contact welding or poor contact

Module body life: プリント基板, cable and drive circuit; aging depends on environmental conditions, no fixed cycle rating.

Life Extension Tips

  1. Add freewheeling diodes (直流) or RC snubbers (交流) for inductive loads such as solenoid valves and contactors.
  2. Keep load current below 1 あ; avoid continuous full-load (2 あ) 手術.
  3. For high-frequency switching (cycles within seconds), use CP1W-8ET transistor output instead of ER relay modules.
  4. Regularly inspect expansion cables and terminals for oxidation and loose connections.

Full List of オムロン CP1W Expansion Units (CP1E / CP1H / CP1L Compatible)

注記: CP1W units are bus-connected expansion modules (daisy-chained with flat cable). CIF, ADB and DAB boards are CPU side option boards (not bus expansion units). 20-point CP1E cannot use expansion units; only 30/40/60-point CP1E, CP1H and CP1L-M support CP1W expansion.

  1. Digital Input Only Units
モデル説明
CP1W-8ED8-ポイント DC24V入力 (NPN/PNPユニバーサル)
  1. Digital Output Only Units (CP1W-8ER listed here)
モデル説明
CP1W-8ER8-point relay NO output, 2 あ
CP1W-8ET8-ポイントNPN (沈む) トランジスタ出力, 0.3 あ
CP1W-8ET18-point PNP (sourcing) トランジスタ出力, 0.3 あ
CP1W-16ER16-point relay NO output, 2 あ
CP1W-16ET16-ポイント NPNトランジスタ出力, 0.3 あ
CP1W-16ET116-point PNP transistor output, 0.3 あ
CP1W-32ER32-point relay NO output, 2 あ
CP1W-32ET32-ポイント NPNトランジスタ出力, 0.3 あ
CP1W-32ET132-point PNP transistor output, 0.3 あ
  1. Mixed I/O Units (入力 + Output integrated)
モデル説明
CP1W-20EDR112 DC inputs + 8 リレー出力
CP1W-20EDT12 DC inputs + 8 NPN transistor outputs
CP1W-20EDT112 DC inputs + 8 PNP transistor outputs
CP1W-40EDR24 DC inputs + 16 リレー出力
CP1W-40EDT24 DC inputs + 16 NPN transistor outputs
CP1W-40EDT124 DC inputs + 16 PNP transistor outputs
  1. Analog I/O Units (電圧 / 電流信号)
モデル説明
CP1W-AD0414 AI, 解決 1/6000; voltage/current selectable
CP1W-AD0424 AI, 高解像度 1/12000
CP1W-DA0212 へ, 解決 1/6000
CP1W-DA0414 へ, 解決 1/6000
CP1W-DA0424 へ, 高解像度 1/12000
CP1W-MAD112 AI + 1 へ, 解決 1/6000
CP1W-MAD424 AI + 2 へ, 高解像度 1/12000 (最も人気のある)
  1. Temperature Input Units (熱電対 / Pt RTD)
モデル説明
CP1W-TS0012-チャンネル熱電対 (K/J type)
CP1W-TS0022-channel Pt100/Pt1000 RTD
CP1W-TS0032-channel multi-function: 熱電対 / 測温抵抗体 / アナログ入力
CP1W-TS00412-チャンネル熱電対 (for oven & injection molding multi-point temperature monitoring)
  1. 付属品 (Expansion Cable)
モデル説明
CP1W-CN81180 cm extension cable; short cable (6 cm) included with each module

補足: CPU Side Option Boards (NOT Bus Expansion Units)

These plug directly into the CPU side slot and cannot be daisy-chained on the I/O bus:

CP1W-CIF01: RS232C

CP1W-CIF11: Non-isolated RS422/485

CP1W-CIF12 / CIF12-V1: Opto-isolated RS422/485

CP1W-CIF41: Ethernet option board

CP1W-DAM01: LCD display panel

CP1W-ADB21 / DAB21V / MAB221: Small analog option boards

クイックセレクションガイド

  1. 高周波スイッチング, 電磁弁, servo pulse output → Choose ET / ET1 transistor models, do not use ER relay modules
  2. AC220V loads with infrequent switching → Select ER relay models
  3. Thermocouple temperature measurement: TS001; Pt RTD: TS002; multi-point temperature monitoring: TS004
  4. アナログI/O: MAD42 (4-in 2-out) が好ましいです; new projects select high-resolution AD042 / DA042

 

前へ:

次:

返信を残す

伝言を残す