PHOENIX TRIO-PS-2G/3AC/24DC/10 DIN Rail Mount Switching Power Supply

注文番号: 2903154

フエニックス・コンタクト TRIO POWER 2nd-generation three-phase DIN rail switching 電源 with Push-in spring terminals. Designed for powering PLCs, sensors and actuators inside electrical control cabinets. Widely used in machine manufacturing, 自動化された生産ライン, HVAC and hoisting equipment.

コード 2901354 often appears in industry documents as shorthand; the complete official part number is 2903154.

✅ Model Definition

TRIO: TRIO POWER series industrial power supply

PS: 電源

2G: 2nd Generation

3交流: 3-phase AC input

24直流: 24V DC output

10: Rated output current 10A

📌 Key Technical Specifications

入力

評価済み: 3×400~500V AC; capable of emergency operation with 2×400~500V AC two-phase supply

動作範囲: 3×320~575V AC

頻度: 50/60Hz

入力電流: 3×0.6A @400VAC

出力

評価済み: 24V DC /10A (240W)

Adjustable output: 24~28V DC

Dynamic Boost: 15A for 5 秒 (to handle inrush loads of motors and capacitors)

リップル & ノイズ: ≤50mVpp

OVP overvoltage protection: Output clamped ≤30V DC

機械式 & 環境

取り付け: DIN 35mm rail

寸法 (幅×高さ×奥行き): 42 ×130 ×160 mm

配線: Push-in screwless spring terminals

動作温度: -25℃～+70℃; derating 2.5%/K above 60℃

効率: >92%

Parallel operation: Supports parallel connection for capacity expansion and redundancy; series connection for voltage boosting

保護: 過電流, 短絡, 過熱, output overvoltage

信号: Relay alarm contact (DC-OK signal)

📋 Certifications & アプリケーション

規格: EN61010, UL, CE, PELV protective extra-low voltage

代表的な用途: 自動化された生産ライン, 包装機械, コンベアシステム, 24V power supply for control cabinets feeding PLC, DI/DO modules, sensors and solenoid valves

High MTBF, に適した 24/7 continuous industrial operation

⚠️ Selection & 交換ノート

1. モデルの区別: 2903154 is 3-phase 3AC; single-phase 1AC version is 2903149, do not mix them up
2. 国内代替品: Mean Well SDR-240-24, Delta DRP-240-24 (注記: no dynamic boost capability for inrush current)
3. Redundancy solution: When paralleling two 2903154 単位, use redundancy module such as QUINT-DIODE
4. インストール: Maintain ≥50mm vertical clearance at top and bottom for heat dissipation; units can be mounted side-by-side with zero horizontal clearance

🛠️ Troubleshooting Guide

POWER LED off: Check 3-phase L1/L2/L3 mains supply; loss of any phase may prevent startup; verify PE earth connection

Output voltage drop / insufficient load capacity: Prioritize checking loose terminals, low input voltage and high-temperature derating

OK contact open: 出力過電流 / short circuit or internal overtemperature protection. Disconnect load and retest

Tripping on power-up due to inrush: Utilize boost feature and evaluate switching surge current

📦 HS Code for Export

8504401400 (Static converters, industrial switching power supply, for customs reference only, subject to local customs determination)

TRIO-PS-2G/3AC/24DC/10 (注文番号. 2903154)

効率: >92%

Test condition: 400V AC input, full rated load

Additional Power Consumption Parameters

No-load power consumption: ＜1.1 W

Power loss at rated load: ＜22 W

注記: This value is the nominal figure from Phoenix Contact official datasheet. Actual efficiency under light load (20%~50% load) will be slightly lower than the 92% full-load rating.

TRIO-PS-2G/3AC/24DC/10 (注文番号. 2903154)

全体の寸法 (幅×高さ×奥行き): 42 mm× 130 mm× 160 mm

📌 Installation Clearance (Critical for cabinet layout)

Horizontal sides: Zero gap side-by-side mounting allowed at ambient ≤40℃; reserve 10mm side clearance when temperature approaches 70℃

垂直: ≥50mm clearance at top and bottom (mandatory)

取付レール: Standard NS35 DIN rail (EN60715)

重さ

約. 1.1kg

Phoenix Contact TRIO-PS-2G Series Full Model List (TRIO POWER 2nd Generation, プッシュイン端​​子)

Series common features: DIN35 rail mounting, dynamic Boost (1.5×rated current for 5s), DC-OK relay alarm, parallel redundancy support, -25～+70℃, derating 2.5%/K above 60℃

1-phase Input 1AC (100~240VAC)｜24VDC Output

3-phase Input 3AC (3×320~575VAC, rated at 3×400VAC)｜24VDC Output (Your target model group)

1-phase Input 1AC｜48VDC Output

4. Common Matching Accessories (For cabinet integration)
5. QUINT-DIODE/12-24DC/20 Redundancy diode module for dual power supply redundancy
6. CBM E4 24DC/0.5-10A NO-R 4-channel 24V electronic circuit breaker (2905743)
7. CBM E8 24DC/0.5-10A NO-R 8-channel electronic circuit breaker (2905744)

✅ Key Selection Guidelines

1. Suffix C2LPS: Only available for the 3A single-phase variant with SIL capability; not required for standard automation projects
2. 3AC three-phase models can run on two phases (L1/L2 only)
3. Width reference: 3A=30mm; 5A=36mm; 10A=42mm; 20A=65mm; 40A=120mm, cabinet layout mainly depends on width

Phoenix Contact TRIO-PS-2G Series Certification List (Including TRIO-PS-2G/3AC/24DC/10, Order No.2903154)

All models in this series share the same certification package. Only the C2LPS suffix model has extra SIL0 capability; standard models are SIL=0

✅ Global Certifications

1. CE (欧州連合)

Low Voltage Directive LVD 2014/35/EU

EMC Directive 2014/30/EU

2. UL / cULus (UL Listed)

UL508 (産業用制御機器)

UL60950-1 (Information technology safety)

ANSI/ISA-12.12.01, Class I Division II Groups A/B/C/D (suitable for North American hazardous areas)

3. IECEE CB Certificate (CB scheme, foundation for multi-country certification conversion)
4. EAC Customs Union Certification (ロシア, ベラルーシ, Kazakhstan and other EAEU markets)
5. DNV GL Marine Certificate (Suitable for ship and offshore control cabinets)
6. BIS (BIS license for India market)

✅ Environmental Compliance

RoHS (欧州連合)

到着

WEEE compliant with waste electrical and electronic equipment directive

✅ Safety & Functional Standards (Standards ≠ Certificates; product compliance specifications)

IEC 60950-1: SELV Safety Extra-Low Voltage

で 50178: PELV Protective Extra-Low Voltage

で 60204-1: Safety of machinery electrical equipment (widely used for machinery)

で 50121-4: Railway EMC standard

IEC 61508: シル 0 (Standard models of this series; TRIO-PS-2G/1AC/24DC/3/C2LPS is specifically marked SIL0 functional safety)

Housing flammability: UL94 V0

✅ EMC Electromagnetic Compatibility Standards

で 61000-6-1 / 6-2: 免疫 (居住の / 産業環境)

で 61000-6-3 / 6-4: Radiated & conducted emissions

で 61000-3-2: Harmonic current limits

📌 Selection Remarks

1. 国内プロジェクト: No CCC certificate, not within mandatory 3C scope. CE for EU export, UL for North America, EAC for Russia/Central Asia, DNV for marine projects.
2. SIL level: Standard TRIO-PS-2G cannot be used for SIL1 and above safety loops. If SIL higher level is required, select QUINT series SIL-rated power supplies.